Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

4-1 Overview of Basic Features ........................................ 40
4-2 Selecting a Paper Tray (Paper Supply) ...................... 42
4-3 Reducing/Enlarging (Reduce/Enlarge) ....................... 43
4-4 Reducing/Enlarging the Length and Width
 (Independent X-Y%) .................................................. 49
4-5 Copying on One Side (2 Sided) .................................. 56
4-6 Copying on Two Sides (2 Sided) ................................. 59
4-7 Collating Copy Output...

4-1  Overview of Basic Features40
Basic Features
4
The screen below has the Tray 6
(High Capacity Feeder), and
Finisher installed.
Overview of Basic Features
The icons and buttons on the display that are used for carrying out a basic
copy job are shown in the diagram below. This diagram shows their
locations on the control panel as well as the features that they have.
You will find it useful to familiarize yourself with the respective locations of
the icons and buttons before operating the machine.
2...

4-1   Overview of Basic Features41
Basic Features
4
Keypad
For entering numerical
values such as number
of sets
Clear All
For clearing and returning the
selected settings to their
default values
Stop
For stopping a copy job
Start
For starting a copy job
Interrupt
For interrupting the current job
with an urgent job
Clear C
For clearing a mistake
made when entering a
value with the keypad 

4-2  Selecting a Paper Tray (Paper Supply)42
Basic Features
4
Before starting a copy job, select a paper tray with the required paper size.
There are two methods of selecting a paper tray:
Auto Paper Selection (Auto)
The machine will detect the document size, match it with the percentage
selected in Reduce/Enlarge and determine which paper size to use.
Operators Selection
You will select the desired paper tray.
Procedure
Load the document.
On the Basic Features screen, select Auto in Paper Supply....

4-3  Reducing/Enlarging (Reduce/Enlarge)43
Basic Features
4
Reducing/Enlarging
(Reduce/Enlarge)
The Reduce/Enlarge feature allows you to adjust the size of your copy
image. There are two methods to choose from:
Size-for-Size Copying (100%)
The copied image is the same size as the original image.
Reduction or Enlargement
You can reduce/enlarge an image by using one of the following methods:
Selecting Auto%
The machine determines the appropriate ratio for Reduce/Enlarge so
that the copy image fits onto the...

4-3  Reducing/Enlarging (Reduce/Enlarge)44
Basic Features
4
Size-for-Size Copying
You can make an exact copy of the original by selecting 100% in Reduce/
Enlarge on the Basic Features screen.
Procedure
Load the document.
On the Basic Features screen, select 100% in Reduce/Enlarge.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made at 100%.
Chapter 3 Loading Documents for
information on how to load
documents.
The factory default...

4-3  Reducing/Enlarging (Reduce/Enlarge)45
Basic Features
4
If you have selected Auto % in Reduce/Enlarge, the machine determines an
appropriate reduction or enlargement ratio so that the copy image fits onto
the paper from the tray which you have selected in Paper Supply.
Procedure
Load the document.
On the Basic Features screen, select the tray with the desired
paper size in Paper Supply.
For example, select 4.
On the Basic Features screen, select Auto % in Reduce/
Enlarge.
Select other features if...

4-3  Reducing/Enlarging (Reduce/Enlarge)46
Basic Features
4
Select Cancel to cancel the settings.
Procedure
Load the document.
On the Basic Features screen, select Reduce/Enlarge.
Select the button with the desired preset ratio.
For example, select 64% 11 x 17       8.5 x 11.
Select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made according to the ratio specified in Step 3.
The screen on the right has the Tray
6 (High...

4-3  Reducing/Enlarging (Reduce/Enlarge)47
Basic Features
4
Paper Supply can also be selected
on the Features Menu screen.
The screen on the right has the Tray
6 (High Capacity Feeder), and
Finisher installed.
Variable Percentage Change (Variable %)
You can make copies by selecting a ratio between 25-400%.
Procedure
Load the document.
On the Basic Features screen, select Reduce/Enlarge.
Select Variable %.
Chapter 3 Loading Documents for
information on how to load
documents.
The factory default for...

4-3  Reducing/Enlarging (Reduce/Enlarge)48
Basic Features
4
Use         buttons, or the keypad displayed on the screen to
enter the ratio.
For example, enter 120%.
Select Save twice.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made according to the ratio specified in Step 4.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Touch C on the screen if you...