Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

5-5  Loading Mixed Size Originals (Mixed Size Originals)89
Added Features
5
Select Cancel or Off to cancel the
settings.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
The screen on the right has the
Finisher installed.
Loading documents in the DADF in
3-2: Loading Documents on how to
load documents.
4-2: Selecting a Paper Tray (Paper
Supply) 
on paper tray selection.
4-3: Reducing/Enlarging (Reduce/
Enlarge)
 on reduction or...

5-6  Copying Facing Pages onto Separate Sheets (Book Copying)90
Added Features
5
The Book Copying feature allows you to make copies of a document with
facing pages and binding margin.
Procedure
Select Features Menu. Then select Book Copying.
Select Left Page Then Right, Right Page Then Left, or To p
Page Then Bottom.
For example, select Left Page Then Right.
Left Page
Then RightRight Page
Then LeftTop Page
Then Bottom
Copying Facing Pages onto
Separate Sheets
(Book Copying)
This feature can only be used...

5-6  Copying Facing Pages onto Separate Sheets (Book Copying)91
Added Features
5
Confirm the settings, and select Save.
Select other features if necessary.
Place the document on the Document Glass.
Enter the required number of sets by using the keypad and
press Start.
The document with facing pages is copied on separate sheets of paper.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Loading documents in the DADF in
3-2: Loading...

5-7  Setting the Margins (Image Shift)92
Added Features
5
The Image Shift feature allows you to move the position of the original
image up, down, left, right or center. Also, it allows you to set a top, bottom,
left, or right margin.
Image is shifted to each corner
Image is shifted to center of paper (Auto Center (Centre))
The center of the document is shifted to match the center of the paper for
copying.
Setting margin
Margin is set by shifting the document top, bottom, left, or right
between 1-432 mm...

5-7  Setting the Margins (Image Shift)93
Added Features
5
The factory default is No Shift.
Select Cancel to cancel the settings.
The screen on the right has the
Finisher installed.
Procedure
Select Features Menu. Then select Image Shift.
Select Side 1.
Select the position to shift the document to.
For example, set a left margin of 10 mm      Set  button (Right) at 10 mm.
¥ Corner Shift: Select       .
¥ Auto Center (Centre): Select Auto Center (Centre).
¥ Margin: Use  
      buttons to set up, down,...

5-7  Setting the Margins (Image Shift)94
Added Features
5
Load the document.
¥ When loading document in DADF:
Load document in the orientation of Head to Top or Head to Left.
¥ When loading document on the Document Glass:
Load document in the orientation of Head to Top or Head to Left.
Enter the document size with Original Size from Features
Menu.
Select the corresponding document orientation of the original
loaded.
Select Head to Top or Head to Left.
Confirm the settings, and select Save.
The factory...

5-7  Setting the Margins (Image Shift)95
Added Features
5
Select Side 2 when making two-sided copies, and define the
image and binding shifts. Select Mirror Shift if you want side
two of the document to be a mirror image of side one.
Confirm the settings, and select Save twice.
Select the paper size from Paper Supply and % from Reduce/
Enlarge.
When Image Shift, or Auto Center (Centre) is selected, select a paper size
larger than the document, or adjust Reduce/Enlarge.
Select other features if...

5-8  Erasing the Edges and Copying All (Edge Erase/Copy All)96
Added Features
5
When copying with the document cover open or when copying bound
documents, shadows are sometimes found at the edges or center of the
copies made. These shadows can be erased with the feature, Edge Erase.
It is also possible to make a copy without erasing these shadows by
selecting Copy All.
Erasing the shadows of documents (Edge Erase)
Set the amount of erase of shadows on the top, bottom, left, or right,
center of the...

5-8  Erasing the Edges and Copying All (Edge Erase/Copy All)97
Added Features
5
Procedure
Select Features Menu. Then select Edge Erase/Copy All.
Select Copy All to copy the entire page.  To erase edges,
select Variable Erase.
If you have selected Variable Erase, use   buttons to select
a value for Top & Bottom Edges (2-50 mm), Left & Right Edges
(2-50 mm) and Center (Centre) Erase (0-50 mm).
For example, select Top & Bottom Edges: 10 mm and Left & Right Edges:
10 mm.The factory default is Normal (T&B:
2...

5-8  Erasing the Edges and Copying All (Edge Erase/Copy All)98
Added Features
5
5-10: Selecting the Original
Orientation (Original Orientation) 
for
details.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Chapter 3 Loading Documents for
information on how to load
documents.
Load document in the orientation of Head to Top or Head to Left.
Select the corresponding document orientation of the original
loaded, and select Save....