Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

6
6-1 List of Custom Preset Functions ................................... 140
6-2 Displaying the Tools Mode Screen ................................ 147
6-3 Configuring the Machine with Tools Mode .................... 149
6
Custom Presets 

6-1  List of Custom Preset Functions140
Custom Presets
6
List of Custom Preset
Functions
The Settings/Meter Check feature is for the System Administrator to select
the feature defaults as well as customize the features for use.
The System Administrator can select and register these settings by using
Tools Mode. He must enter his Access Number to display this screen. The
factory default is 11111  .
Paper Tray Attributes
* indicates the factory default. Tray 6 (High Capacity Feeder) is optional.
Item...

6-1  List of Custom Preset Functions141
Custom Presets
6
Feature Defaults
Select the default values of the features. The settings of the machine will
return to the default values selected here when the power is switched on,
when it returns from the power saver mode or when Clear All is pressed.
Although these are the factory defaults, you can make copying more
efficient by customizing frequently used features beforehand as the defaults.
Also, the defaults listed here are reflected in Basic Features,...

6-1  List of Custom Preset Functions142
Custom Presets
6
This section describes the machine tones that you can set to inform you of a
completed copy job, machine fault and so forth.
Audio Tones
* indicates the factory default.
Item Description Available Options
* indicates the factory default.
Item Description Available Options
Select Off to disable the tones.
     6-2 Displaying the Tools Mode Screen, and 6-3: Configuring the Machine with Tools Mode
Selection Tone Sound when you have selected a button...

6-1  List of Custom Preset Functions143
Custom Presets
6
Original Size Defaults
Select the original size defaults shown in Original Size on the
Customized Features screen or the Features Menu screen.
You can select up to 11 types of original sizes including the
standard sizes (A, B and Inch series original sizes).
To enter a non standard size original, select Original Size and
use the keypad to enter values for the X axis (width) and Y
axis (length).
    The size input is shown as Special OOO X OOO mm
*...

6-1  List of Custom Preset Functions144
Custom Presets
6
Time-Outs
This setting allows you to set the waiting time until features such as Auto
Clear and Power Saver are enabled. On a model with the printer function,
the timeout settings may differ.  See the
 Operating Instructions (Printer) for
details.
R/E Presets
You can define the ratios to be displayed as fixed ratios in Reduce/Enlarge.
You can select fixed ratios from 18 types (25-400%) of ratios and place them
in the six preset buttons (1-6)....

6-1  List of Custom Preset Functions145
Custom Presets
6
Change of Access Number
You can change the Access Number of the System Administrator.  The
Access Number must be in numeric values between 4 to 12 digits.  To
change the Access Number, use the keypad to enter the new access
number twice, and select Enter.
The factory default is
Ò11111Ó.
Changing the Access Number of the
administrator of 6-3  Configuring the
Machine with Tools Mode
This feature allows you to customize the default screen, Basic...

6-1  List of Custom Preset Functions146
Custom Presets
6
     6-2: Displaying the Tools Mode Screen, and 6-3: Configuring the Machine with Tools Mode
     6-2: Displaying the Tools Mode Screen, and 6-3: Configuring the Machine with Tools Mode
* indicates the factory default.
* indicates the factory default.
Item Description Available Options
System Setup
This feature allows you to impose restrictions on, for example, the maximum
number of copies, and Auto Power Off Timer.
Image Quality
Item Description...

6-2  Displaying the Tools Mode Screen147
Custom Presets
6
This section describes the procedures for displaying the Tools Mode screen.
You need to enter the Access Number of the System Administrator in order
to proceed with selecting the features on the Tools Menu.
The factory default for the Access Number is 11111.
Procedure
Press Settings/Meter Check.
Select Tools Mode.
Enter the Access Number of the System Administrator by
using the keypad and select Confirm.
Each input digit is represented by an...

6-2  Displaying the Tools Mode Screen148
Custom Presets
6
Exiting the Tools Mode Screen
You can return to the default screen by the following procedures once you
have selected the required features.
Procedure
Select Exit Tools on the Tools Mode screen.
The default screen re-appears.
If default time of System Admin.
Mode Exit Timer is defined in Time-
Outs, the machine will exit the mode
once the set time has elapsed and
the default screen will be re-
displayed. The factory default is 10
minutes.
You will...