Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

6-3  Configuring the Machine with Tools Mode159
Custom Presets
6
Select No Feature if you do not wish to
assign any feature to the button.
    Configuring the Customized Features Screen  
This feature allows you to assign the customized features to be displayed
on the Customized Features screen. You can assign a maximum of eight
buttons on this screen.
The eight buttons of Customized Features are arranged as follows.
Procedure
Press Settings/Meter Check.
Select Tools Mode.
Enter the Access Number of the...

6-3  Configuring the Machine with Tools Mode160
Custom Presets
6
You can also select the customized
button directly by touching it.
Select Screen Layout.
Select Change Settings in Customized Features screen.
Use         to select the desired customized button.
 Select Change Settings.
For models with the printer feature,
the screen displayed differs. 

6-3  Configuring the Machine with Tools Mode161
Custom Presets
6
Select the feature to be displayed in the selected customized
button and select Save.
For example, select Output/Finishing.
Repeat Steps 6 to 8 when necessary to assign the required
features to all the customized buttons.
Select Close until the screen shown in Step 4 is displayed.
Select Exit Tools.
The buttons are displayed on two
pages. Use     or     buttons to page
up or page down.
Select No Feature if you do not wish to
assign any...

This page is intentionally left blank. 

7-1   Troubleshooting .......................................................... 164
7-2 Paper Jams ................................................................. 168
7-3 Document Jams .......................................................... 183
7-4 Stapler Faults .............................................................. 189
7
Troubleshooting 

7-1  Troubleshooting164
Troubleshooting
7
Troubleshooting
This section describes the troubleshooting methods in the event of an error.
A message will be shown on the display if paper is jammed or there is an
internal machine fault.  Follow the displayed instructions to identify the
problems and troubleshoot.  Contact your local authorized Panasonic
service representative if any problem persists even after you have tried the
following solutions.
When an Error Message is Displayed
If error messages are...

7-1  Troubleshooting165
Troubleshooting
7
Is there anything
placed on the DADF?Remove it. Is the document a transparent material?Place the document on the document
glass.  Then place a sheet of white paper
over the document. Is the document loaded correctly? The images on the copy are
skewed.Load the document correctly.
¥  3-2:  Loading Documents
The copy is too light. Is the density of the document too light?
Is copy density set at Lightest?Select a darker copy density setting.
Increase toner dispensing...

7-1  Troubleshooting166
Troubleshooting
7
Ensure that the document guide on the
DADF touches the edge of the document.
¥  Loading documents in the DADF in
3-2:  Loading Documents
Remove the stickers, clips and cellophane
tapes and copy again. Are stickers, paper clips and cellophane
tapes attached to the document?
Symptom Check Measure
Is the document guide on the DADF in the
right position?
Part of the image is missing on
the copy.Is the paper damp?If the paper is damp, either some parts of
the copy are...

7-1  Troubleshooting167
Troubleshooting
7
Paper is often jammed or
wrinkled.
Symptom Check Measure
Is the paper loaded correctly in the tray?Load the paper correctly.
¥  2-3: Loading Paper
Is the paper tray set correctly?Ensure that the paper tray is pushed in
completely.
¥  2-3: Loading Paper
Is the paper in the paper tray folded or
wrinkled?Replace the undesirable paper with paper
from a newly opened ream.
¥  2-3: Loading Paper
Is the paper curled?Turn the paper over in the tray or replace
the...

7-2  Paper Jams168
Troubleshooting
7
Paper Jams
Do not open the cover if you see
smoke emitting as a result of a
paper jam.  Immediately switch off
the power and disconnect the power
cord.  Then contact your local
authorized Panasonic service
representative.
Once a paper jam is detected, the machine will stop and an error message
will be shown on the display.
Follow the instructions on the display to remove the jammed paper.
This section describes how to remove jammed paper from the following
locations:...