Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

8-7  Emptying the Punch Scrap Container209
Daily Care
8
Empty all the scraps.
Insert the Punch Scrap
Container and push it into
the machine.
Close the Front Door of the
Finisher.
You must dispose of all the scraps in
the container even if you have just
pulled the container out a little.  This
is because the machine will sense
that the container has been pulled
out.  If you do not dispose of the
scraps, the container may be full
before the next punch scrap
container disposal message is
displayed thus...

8-8  Checking the Billing Meter210
Daily Care
8
Checking the Billing Meter
You can check the meter on the Settings/Meter Check screen.
Current Count .......Shows the number of copies made up till the present
time.
Procedure
Press Settings/Meter Check.
Select Meter Check.
The following types of copies are not
counted:
¥Blank sheets inserted by the
machine.
(A blank sheet is automatically
inserted if the total number of
sheets of the documents is an odd
number for 2 Sided.)
¥First and last blank pages...

8-8  Checking the Billing Meter211
Daily Care
8
Check the reading.
Select Close until the default screen is shown.
The Settings/Meter Check screen clears and the default screen re-appears. 

8-9  Making Clean Copies212
Daily Care
8
Making Clean Copies
Regular cleaning of the internal parts of the machine helps in producing
clean copies every time.  This machine is equipped with a feature that
allows plain paper to be fed for automatically removing dirt, which easily
accumulates on the fuser unit and other internal parts.
Procedure
If paper other than plain paper are loaded in the trays,
temporarily remove them.  Confirm that plain paper is loaded in
any of the trays other than Tray 5...

8-9  Making Clean Copies213
Daily Care
8
Select Start.
If fuser unit is not warmed up, wait a while for cleaning to begin.
The following screen is displayed while the fuser cleaning is in progress.
No copy job can be done during this time.
After the end of fuser cleaning, the Fuser Cleaning screen re-appears.
 Select Close until the default screen is shown.
The Settings/Meter Check screen clears and the default screen re-appears. 

This page is intentionally left blank. 

9-1 Auditron ...................................................................... 216
9-2 Displaying the Auditron Administration Mode Screen . 218
9-3 Confirming the Account Data ...................................... 220
9-4 Editing the Account Data ............................................ 223
9-5 Deleting the Account Data .......................................... 227
9-6 Enabling/Disabling Auditron ........................................ 229
9-7 Defining Automatic Display of the Password Entry...

9-1  Auditron216
Using the Auditron Feature
9
Auditron
When the Auditron mode is enabled, the copy volume of each account user
can be calculated.  This is done by assigning a Password to each account
user.
The relationship between the Password Entry screen and a normal
screen is as shown below.
Using the Auditron Mode
In the Auditron Administration Mode, select On for Auditron Mode on the
Auditron Setup screen and register a Password for every account by using
the Create/Modify Accounts screen.
9-4:...

9-1  Auditron217
Using the Auditron Feature
9
The following operations can be done in the Auditron Administration mode.
Item Description
Reviewing the Account Data The password, copy limit and current copy volume
settings can be reviewed for every account.
¥ 9-3: Confirming the Account Data
Creating/Modifying Account Data The password and copy limit of each account
can be created/modified.
Up to 300 accounts can be registered.
¥ 9-4: Editing the Account Data
Deleting the Account Data The copy volume,...

9-2  Displaying the Auditron Administration Mode Screen218
Using the Auditron Feature
9
Displaying the Auditron Administration Mode Screen
This section explains the procedures for displaying the Auditron
Administration Mode screen.
Procedure
Press Settings/Meter Check.
Select Auditron Admin. Mode.
Enter the Access Number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk.
The Auditron Administration Mode screen is displayed.
Displaying the Auditron...