Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

9-6  Enabling/Disabling Auditron229
Using the Auditron Feature
9
This section explains the procedures for Enabling/Disabling the Auditron
Mode.  If Auditron Mode is set to On in Auditron Setup, then the Auditron
Mode is enabled.  In this case, the Password Entry screen will appear when
the machine is switched On.
Procedure
Press Settings/Meter Check.
Select Auditron Admin. Mode.
Enter the Access Number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk....

9-6  Enabling/Disabling Auditron230
Using the Auditron Feature
9
Select Auditron Setup.
Select On or Off.
Select Close.
Select Exit Auditron.
The default screen is displayed if you have selected Off.
Review CE Data is used only by
Panasonic Service Representative. 

9-7  Defining Automatic Display of the Password Entry Screen231
Using the Auditron Feature
9
This section explains the procedures for defining the time required for the
machine to return to the Password Entry screen after a copy job is
completed.
Procedure
Press Settings/Meter Check.
Press Settings/Meter Check.
Enter the Access Number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk.
Defining Automatic Display of
the Password Entry Screen
The factory...

9-7  Defining Automatic Display of the Password Entry Screen232
Using the Auditron Feature
9
Select Auditron Setup.
Select Set Timer for Password Entry Screen Timer.
Specify a time between 1-59 seconds or 1-10 minutes in 1
second/minute increments by using the         buttons.
Select Save, and then Close.
Select Exit Auditron.
The Password Entry screen is displayed.
Select Disable if you want to disable
the Password Entry screen feature.
When the time displayed exceeds
59 seconds, it will be changed to...

9-8  Changing the Auditron Access Number233
Using the Auditron Feature
9
You can define the Access Number by using 4 to 12 digits.
Procedure
Select Auditron Admin. Mode.
 Select Auditron Admin. Mode.
 Enter Access Number of the Auditron Administrator and select
Confirm.
Changing the Auditron Access
Number
The screen on the right has the
Auditron Mode enabled.
The factory default is Ò11111Ó.
If you made a mistake while entering
the Access Number, press the Clear
C button to clear and re-enter. 

9-8  Changing the Auditron Access Number234
Using the Auditron Feature
9
Review CE Data is used only by
Panasonic Service Representative.
Select Change of Access No.
Enter the New Access Number and select Enter.
Enter the same number again for confirmation and select
Enter.
Select Close.
Select Exit  Auditron.
The Password Entry screen is displayed.
To change the Access Number
setting, select Reset or the Clear C
button.
Define the Access Number within
the range of 4 to 12 digits.
The default screen is...

A Specifications .............................................................. 236
B Possible Combinations of Features ............................ 239
C Stapling ....................................................................... 243
D Options and Supplies .................................................. 245
Appendix 

A  Specifications236
Appendix
A
Standard Specifications
Copier Type Console
Platen Type Fixed
Photosensitive Type Organic photosensitive conductor (OPC)
Copying Method Indirect electrostatic
Development Method Dry development
Fusing System Heat roller
Scanning Method 3-dimensional scanning by CCD image sensors
(for copying) Scanner : 400 dots/25.4 mm (400 dpi)
Recorder: 600 dots/25.4 mm (600 dpi)
Warm-up Time 120 V Model: 3 minutes or less (68¡F/20¡C 60% density)
220 V-240 V Model: 3 minutes or less...

A  Specifications237
Appendix
A
Copy Paper Size Tray 1
A5, A5, 5.5Ó x 8.5, B5, A4, 8.5 x 11
Tray 2 to 4
A5, A5
, 5.5 x 8.5, B5, B5, A4, A4, 8.5 x 11, 8.5 x 11, 8.5 x 13,
8.5 x 14, B4, 8K (267 x 388 mm), A3, 11 x 17
Tray 5 (Bypass)
A6, B6, A5, A5
, B5, B5, A4,  A4, B4, 8K (267 x 388 mm), A3,
5.5 x 8.5, 8.5 x 11, 8.5 x 11
, 8.5 x 13, 8.5 x 14, 11 x 17
Non standard size (Y: 100-300 mm or 3.8-11.8)
    *Area which can be copied is up to 297 mm or 11.7
                              (X: 148-432 mm or 5.8-17 )...

A  Specifications238
Appendix
A
   Finisher (optional)
Power From main body of machine
Power Consumption 120 V model: 72 W
220-240 V model: 79 W
Size (W) 700 x (D) 650 x (H) 1100 mm or (W) 27.6 x (D) 25.6 x (H) 43.3
Dimensions Main body + Tray 5 (Bypass) + Finisher: (W) 1599 x (D) 778 mm or (W) 63.0 x (D) 30.6
Weight 55 kg or 121 lbs
Capacity Tray 1 (top tray): 500 sheets (20 lbs or 80g/m
2)
Tray 2: 1500 sheets each (750 sheets each when paper is larger than A4.) (20 lbs or 80g/m2)
Paper Size...