Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

5-17  Making Duplex Copies of Facing Pages (Book Duplex)119
Added Features
5
Some features cannot be selected
together with this feature. 
See
Appendix B: Possible Combinations
of Features
 for details.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Load the next document if any, and press Start.
After the last page has been scanned, select End Job.
Copies are made and assigned with the same page number...

5-18  Inserting Covers (Covers)120
Added Features
5
The Covers feature allows you to use another type of paper (for
example, colored/heavy weight paper) and insert them as the first
page of the copies made.
Procedure
Load the document.
Select Features Menu. Then select     Next Page.
Chapter 3 Loading Documents for
information on how to load
documents.
Inserting Covers
(Covers)
The screen on the right has the
Finisher installed. 

5-18  Inserting Covers (Covers)121
Added Features
5
Select Covers.
Select Front Cover.
Confirm the selection of the tray used for the cover as well as
the tray used for body pages.
When using other trays, select Paper Tray Settings.
(When not changing the tray, proceed to Step 7.)
Select the paper tray to be used and select Save.
The factory default is No Covers.
Select Cancel to cancel the settings.
Auto cannot be selected for Paper
Supply.
Select the same size and orientation
of paper used for covers...

5-18  Inserting Covers (Covers)122
Added Features
5
Confirm the settings, and select Save.
Load paper for covers in
Tray 5 (Bypass).
Load paper in the same
orientation as paper used for
copying the body pages.
(If another tray is selected
in Step 6, load paper in
that tray.)
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies with covers are delivered.
Some features cannot be selected
together with this feature. 
See
Appendix B: Possible...

5-19  Making a Sample Set (Sample Set)123
Added Features
5
If you need to make many sets of a document, the Sample Set feature
allows you to output only one set of the document for checking. The
remaining sets will only be copied after the sample set is confirmed.
Procedure
Load the document.
Select Features Menu. Then select     Next Page.
Select Sample Set.
Chapter 3 Loading Documents for
information on how to load
documents.
Making a Sample Set
(Sample Set)
This feature cannot be used during
Auto...

5-19  Making a Sample Set (Sample Set)124
Added Features
5
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Check that On is selected.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Only one set is copied.
Check the sample set.
Press Start to output the remaining sets.
To change the settings, press Clear C to clear and re-select....

5-20  Creating a Booklet (Booklet Creation)125
Added Features
5
The Booklet Creation feature enables one sided or two sided
documents to be copied as a booklet.
Procedure
Load the document.
Select Features Menu. Then select     Next Page.
Creating a Booklet
(Booklet Creation) 

5-20  Creating a Booklet (Booklet Creation)126
Added Features
5
Select Booklet Creation.
Select the image orientation of the loaded originals and the
desired binding location.
See below about the copy results based on the selected binding location and
original orientation.
For example, select Left Bind, and Head to Left.
    Orientation of document and copied image
Ò1Ó indicates the first page of the originals, and Ò3Ó indicates the third page.  An odd-number
page is copied on side 1, and an even-number...

5-20  Creating a Booklet (Booklet Creation)127
Added Features
5
Select Originals/Image Order.
For two sided originals, select Head to Head or Head to Toe.
Then select Original Order or Last Original as Back Cover.
If Last Original as Back Cover is selected, the last page of the originals will be
copied as the back cover of the booklet.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made as a...

5-21  Job Memory Operations128
Added Features
5
The Stored Jobs feature allows you to save the frequently used features as
a job in the job memory. Up to eight jobs can be saved and each job can be
accessed by touching its corresponding button.
This section explains the procedures for registering copy job settings in the
job memory.  There are two methods and both allow you to achieve the
same purpose.
¥ Using Stored Jobs
¥ Using the Settings/Meter Check button
    Using Stored Jobs  
Procedure
Use the...