Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

1-3  Using the Touch Panel Display9
Getting to Know Your Copier
1
The System Administrator can use
the Tools Mode to select the screens
to be displayed. See sections on
Feature Defaults and Screen Layout
in 6-1: List of Custom Preset
Functions 
for details.
Changing the Display Screen
Four screens are available for selection on the display. They are the Basic
Features screen, Customized Features screen, Features Menu screen and
Stored Jobs screen.
Select the Basic Features, Customized Features, Features...

1-3  Using the Touch Panel Display10
1
Getting to Know Your Copier
Selecting a Feature
Touch a displayed button to select a feature or value. See ÒChapters 4 to 6Ó
for details.
When the feature name is displayed on the button:
When there is a pop-up mark attached to the button: 

1-3  Using the Touch Panel Display11
Getting to Know Your Copier
1
When there are Scroll Buttons
Functions of the Reset, Cancel and Close/Save Buttons
Returns all the selected features and values to their
original settings when the screen was first displayed.
Cancels all the selected features and values of the
displayed screen and returns to the previous screen.
Registers all the settings and returns to the previous
screen.
When a Button Is Not Available
An unavailable button is dim and grey in color. 

1-3  Using the Touch Panel Display12
1
Getting to Know Your Copier
Message Pop-up and Confirmation Pop-up Screens
A message pop-up screen will be displayed to show warning or caution
notes. Select Close to exit from this screen.
A confirmation pop-up screen will be displayed when an action requires your
confirmation. Select either Yes or No to exit from this screen.
Message Pop-up Screen
Confirmation Pop-up Screen
Error Message Screen
An error message screen will be displayed when it is time to replace...

13
1
1-4  Entering Password (When the Auditron Feature is Enabled)
Entering Password
(When the Auditron Feature is Enabled)
Chapter 9 Using the Auditron
Feature
 for details on the functions
and settings of the Auditron feature.
The Auditron feature allows you to control the number of copies that a
department (account user) can make by assigning a password to the user.
The diagram shows the relationship between the Password Entry screen
and the default screen. This section describes the procedures for...

14
1
Getting to Know Your Copier
1-4  Entering Password (When the Auditron Feature is Enabled)
If you made a mistake while entering
the password, press the Clear C
button to clear and re-enter.
You can change the maximum
display time (time-out) of the default
screen by using the Auditron
Administration Mode. See 
9-7:
Defining Automatic Display of the
Password Entry Screen
 for details.
Procedure
When the Password screen is being displayed, enter your
Password by using the keypad.
Each input digit is...

15
1
1-5  Saving Power
The machine has a power-saving feature, which lowers the power
consumption when copying is stopped for a period of time.  This consists of
two modes based on the level of power consumption.
Low Power Mode (Power Saver Mode)
Power consumption: 120 V model: 206 W, 220-240 V model:208 W
The power of the control panel and fuser unit lowers.  The display is unlit.
The Power Saver light on the control panel is lit.
To copy, press the Power Saver (On/Off) button.
    The Power Saver light...

16
1
Getting to Know Your Copier
1-5  Saving Power
You can enable the Low Power Mode manually when you are not making
copies for a period of time.
Procedure
Press Power Saver (On/Off).
                  
The power saver light is turned On and the machine is in the Power Saver
Mode.
    Disabling the Power Saver Mode 
Procedure
 Press Power Saver (On/Off).
        
The power saver light is turned Off and the Power Saver Mode is disabled.
When the machine in low power
mode is not used for a set period of...

2-1 What Paper to Use ..................................................... 18
2-2 Storing and Handling Paper ........................................ 20
2-3 Loading Paper ............................................................ 21
2-4 Changing the Paper Tray Size .................................... 25
2
Loading Paper 

2-1 What Paper to Use18
Loading Paper
2
This section describes the paper stock that can be used on this machine.
The Tray 6 (High Capacity Feeder) is
optional.
For two-sided copying, use
15 - 34 lbs
  paper.
What Paper to Use
Weights of Paper
Paper Size and Tray Loading Capacity
The applicable paper size and the loading capacity for the respective
trays are shown below.
Do not use paper with glue or tape
on it.
For curled paper, uncurl them before
loading.
You cannot make two-sided copies
onto paper...