Panasonic Digital Business System Section 300 Installation Guide

Section 400 FFl 
Issue 2 July 1993 DBS RolErpmmipg hdxuctions 
CPGA / 3.0, CPGB / 2.0 / 3.0 / 4.0 
Determines how long the DBS tries to re- 
cover from a yellow alarm before it re-syncs 
the Tl trunk. 
Options lo-15 
I 
Values 
1 O=O ms (immediate) I8=80 ms 
1 
JElshls !%I0 ms 
2=2oms lO=llOms 
3=30 ms 11=120 ms 
44oms Lb130 ms 
s=50 ms 13=140 ms 
6=6oms 14=150 ms 
7=70 ms 
15=160 ms 
For changes to this parameter to take effect, 
the system must be powered down. then 
back up....

DBS Programming Insl~~ctions 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section400 FFl 
bsue 3 July 
1993 
Determines how long the DBS tries to re- 
cover from an out-of-frame (OOF), Loss of 
Signal, Sync Loss, or AIS alarm before it 
resyncs the Tl trunk. 
Options lo-15 
I 
values lo=o~ 18=3cxIoms I 
1=250 ms 9=4oooms 
2=500 ms lO=SCCIO ms 
13=7SOms 111=6OOOms 1 
14=1OOOms ~12=7OOOms I 
I5=1500 ms 
I 13=8000 ms I 
6=2000 ms 14=9000 ms 
7=2500 ms lS=loooO ms 
For changes to this parameter to take effect, 
the...

section 400 FFl 
Issue 2 July 1993 DBS Pro@amming Intstruction~ 
CPGA / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
Determines how many slips occur befonz a 
Slip Loss Alarm key is lit. 
‘Ihe key lights when the counter exceeds the 
specified number within a 24-hour period. 
This parameter also determines the number 
of slips that can occur before the system 
switches to the next clock source. When the 
system switches to the next clock source, 
the slip en-or counter for the first clock 
source is reset. 
Slips are...

DBS Programming Instructions 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section 400 FFl 
Issue 3 July 1993 
Determines how many instances of signal Determines how many instances of sync 
loss occur before a Signal Loss Alarm key is 1ossoccurbeforeaSyncLmsAkmnkeyislit. 
lit. The keylightswhenthecounterexceedsthe 
The key lights when the counter exceeds the specified number within a 24hou.r period. 
specitM number within a 24-hour period. 
73  

Section 400 FFl DBS Ro#ammlqj Instn~ctions 
Issue 2 July 1993 WC-A / 3.0, CPGB / 2.0 / 3.0 / 4.0 
Determines how many yellow alarm indica- 
tions occur before a Yellow Alarm key is lit. 
The key lights when the counter exceeds the 
specified number within a 24-hour period. 
(See instructions on programmingT1 alarm 
keys.) Determines whether the system closes the 
-alarmrelay&th&TlMDFcardinthee&nt 
of yellow alarms. 
like ah-m rday can be connected to an 
tztemalalaxmdevicesuchasabuzzer. The 
external...

DBS Programming Instructions 
Section 400 FFl 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
Issue 3 July 1993 
Determines whether the system closes the 
alarm relay on the Tl MDF card in the event 
of red alarms. 
The alarm relay can be connected to an 
extemalalarmdevicesuchasabuzzer. The 
external alarm device must be purchased 
separately; it is not provided with the DBS 
Tl. 
A red alarm indicates a loss of fi-ame @OF) 
or loss of signal has continued for over 2.5 
seconds. 
O=OB (The alarm relay does not...

Section 400 FFl DBS Programming Instructions 
Issue 2 July 1993 CPC-A / 3.0. CPC-B / 2.0 i 3.0 / 4.0 
Determines whether the system closes the 
alannrelayontheT1MDFcardintheevent 
of fi-ame loss alarms. 
The alarm relay can be connected to an 
external alarm device such as a buzzer. The 
external alarm device must be purchased 
separately; it is not provided with the DBS 
Tl. 
O=Off CIhe alarm relay does not close: the 
alarm is not reported.) 
l=On me alarm relay closes, so the alarms 
is reported.)...

DBS Programming Instructions 
Section 400 FFI 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
bsire 3 July 1993 
Determines whether the Tl alarm relay is 
cleared (opened) automatically or manuaJly. 
If cleared automatically, the relay is opened 
approximately one second after the alarm 
condition ceases. 
Ifcleared manually, the relay can be opened 
by entering the Alarm Relay Clear code. 
To enter the Alarm Relay Clear code, first 
enter the programming authorization code 
(#98 9999). 
. Determines what trunk...

Section 400 FFl 
Issue 2 July 1993 DBS Programming Instruct.io~ 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
Deterrnines the type of trunk signaling that 
each Tl channel emulates. 
O=Loop start 
I=Ground start 1 
2=Ground start 2 
3=Ex!zM 
For changes to this parameter to take effect, 
the system must be powered down, then 
back up. Determines if DID and/or DNIS is provided 
for a trunk. DNIS is available only with Tl . 
If DID is selected, the system uses a DID 
Numbers Table, which supplies 500 DID...

DBS Programming Inst~ctions section 400 FFl 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 bsue 3 July 1993 
Determines the signaling cbs used by T1 Determines the signaling class used by Tl 
channels on outgoing calls. channels on incoming calls. 
O=Immediate start 
l=Wink start 
2=Dial-tone start 
~~~ @ggzpJg;:; O=Immediate start 
l=Wink start 
c?z!ym!J 
..ij~~~ 
For changes to this parameter to take effect. 
the system must be powered down, then 
i ~ 
For changes to this parameter to take effect, back up. 
the...