Panasonic Digital Business System Section 300 Installation Guide

Section 400 FF3 
issue 3 July 1993 DBS Rogmmmin~ Instructions 
WC-A / 3.0, WC-B /2.0 /. 3.0 / 4.0 
As of CPC-B Version 4, extensions can 
have MC0 or ML keys. In previous 
versions, the keys were avaiIable on a 
system-wide basis. The type of key 
available ditTered with the software 
release. In this parameter, “(00 1 - 144)” 
represents the extension port number. 
In “0 or 1,” ” 0” represents the MC0 keys 
and ” 1” represents the ML keys. The 
following table shows MCL/ML avail- 
ability. 
1. The...

DBS Pro@mming Instructions 
CPC-A 
/ 
3.0 WC-B / 2.0 / 3.0 / 4.0 
Large display screen APPElVDlX 
%‘%tion 400 FF3 
Issue 
3 July 1993 
The fotlowing are the possible screen appearances of the large display 
telephone 
(‘VB-43225), when any of the 25 screen selections are chosenfor a 
particular telephone condition, Some screens can not be set to display during 
certain telephone conditions if the prompts are not reteuant to the conditions 
of the phone. 
‘No Change” 
(/ T%sonaz speed Did” 
 rnJ, CDBS ext...

DBS Prorpammins Instructions 
CPGA / 3.0, CPC-B /2.0 / 3.0 / 4.0 
‘Guidance Menu 3” 
ml, DE3 at pt rtumbe#* cxxE#k 
Section 400 FF3 
Issue 3 July 1993 
“Guidance Menu 2” 
ml, ms ext. port numbaf#, c26-331#, is 
‘Attendant Menu 3” 
Em, DBssctport-. l%3--33)# 
At&U&&J& 
00 
:Si,. Thu A-PR 02 
RI CR’ 0 0 I 
> PI og’t a-mm In g Y o d-e 
> Ou tgolng‘.Amount 
1, 1m ‘IAttendant Menu 2” 
ml, D~ex?Qofinumber)#, tz?6-33..#* 9?Y 
Attendant 0nl.g 
Tunction Screen 1 *V 
< 
-2 
< 
* 
* 
< 
< 
< 
< 
< 
f 
122  

DBS F’ro@ammin~ hst~ctions 
CPGA / 3.0 CPGB / 2.0 / 3.0 / 4.0 
‘Function Screen 2” 
pl?3], DBS exL pat lllm&ed#, (2&33M, 1% 
hAion 400 FF3 
Issue 
3 July 1993 
‘Function Screen 3” 
WJ, DES ed pat rurmber)#, Wz)#, 13# 
I 0 9 .: F :I .. 1 ‘I! ‘U A P R -‘,o’-a 
I RICH ( 0 .*.-. 
‘!Function Screen 6” 
f-31, Iz>Bs fzxt port number3#, (26-331#, 16# 
09:51 Thu APR 02 
RI CH 
6 0 4 
Set 
C6 I I W8I tlng 
set Y 0,s 9 a g 0 
set co -Queu!ng 
Busy--0vrrrIdo 
R e I e a’s e 
‘Function Screen 5” 
rnL DB-Qxldnumber)#,...

Sectton 400 FF3 
Issue 3 July 1993 
‘Function Screen 8” 
m3L 03s ext p-t number3#, t26-331#. 18# 
> 
> 
> 
> 
> 
P 
Ri r e-as-a. toti* 
c- 0 8’ ‘f .e c 0 n c 0 Park 
Function Screen 12” 
09 :Sl Thu APR 0.2 
RICH 
6 0 4 
s a V e uu t 4 
PSD-DIR RBlars4 
SSD-DIR Transfer 
r 
coit Rdrirrn’dar 
^. -. 
cc..: - 
A C-C,.T,‘.- 6 0. d .; E a. i: r 
y .  . ‘, DBS Rogrammtng Instructions 
CPGA / 3.0, WC-B /2.0 / 3.0 / 4.0 
‘Z%mction Screen 2 l)( 
P-J iz?ix.BM* 21# 
z 
> 
> 
> 
> 
m 
, 
> 
> 
> 
> 
3h 
I 
‘Function...

/ 
DBS Pro@mmiqj Instructions Section 400 FF3 
WC-A/ 3.0 CPGB / 2.0 / 3.0 /CO Issue 3 July 1993 
‘!hnction Screen 14” Tunction Screen 15” 
LFF31, DES ext p-t nuJnM#, 
c=331#, 24# ml, DBsct port number)#, c26-33)#, 2!3#  
> 
> 
> 
> 
> 
0 9 :51 Thu APiI 02 
R I CH 
0 0.4 
Telkback DND 
Release Park 
Conference 
Transf.er < > 
< 
> 
< 
> 
< 
> 
< 
> 
09 :, 5 1 T h u; :A:.P p. ,iJ ? 
_. .” . :: .,.I 
RI CH 
8 0.4 
HOLDING N 0 1 II‘ .i N- i 
TRF’-TO 
WAI T: 0 0 
125  

Section 400 FF4 Issue 3 July 
1993 DBS Rogramming I~tructions 
WC-A / 3.0, 
WC-B / 2.0 
/ 3.0 / 4.0 
I 
3-4 RING8tHUNTGROUP 
PROGRAMMING P 
Central office line “day mode” ring Central office line “day mode” ring 
assignments for all extensions are set assignments for all hunt group pilot 
with this option. numbers are set with this option. 
To set extension 120 not to ring on 
central office line 19 when the DBS is in 
the “day mode”, for example, enter: 
JFF41. l#. l#. 19W. OW 
To set extension 120 to...

DBS F’ro@amming hStruC~onS 
Section 400 FFQ 
CPC-A / 3.0 WC-B / 2.0 
issue 2 June 1993 
Central office line “night mode” ring 
assignments for all extensions are set 
with this option. 
To set extension 120 not to ring on 
central ot&e line 19 when the DBS is in 
the “night mode”. for example. enter: 
JFF41.2#. 218. lQ#.O# 
To set extension 120 to ring on central 
offke line 
50 when the DBS is in “night 
mode”, for example, enter: Central office line “night mode” ring 
assignments for all hunt group...

Section 400 FF4 
Issue 3 July 1993 
A maximum of 8 extensions can be put 
in each of 8 hunt groups. Each hunt 
group can be designated as a “terminal 
type”, or “circular type”. 
Terminal Hunt Group Operation 
The call must be transferred or a 
central office line set to ring at the 
first extension in the grout in order 
for the terminal hunt feature to work. 
If the first extension of the hunt group is 
busy, an incoming call will automatically 
access the next extension of the group. 
If all the...

DBS Programming Instructions 
WC-A / 3.0 CPC-B / 2.0 Section 400 FF4 
Issue 2 June 1993 
If all extensions are busy, an incoming 
call will wait for an available extension. 
If an extension within either type of 
hunt group: is set with an absence 
message, with a call forward feature, or 
to DND, the hunt feature will skip that 
extension, and procede to the next 
extension within the group. If the fast 
extension within either type of hunt 
group is set with an absence message, 
with a call forward...