Panasonic Digital Business System Section 300 Installation Guide

Scction4-OOFF3 
Issue3JulylS93 
Define the EM/24 extension module 
hardware port number, then assign an 
extension port number that will be used 
with it. The first program entry relates 
to the EM/24 port number, the second 
program entry refers to the extension 
port that the EM/24 works with. 
To set a po& for the EM/24 to work with 
extension port 30, for example, enter: 
pF3], 
55#, 31c;3ow 
To reset the use of an EM/24 on anv 
extension 
sort to the default initialized 
value. Dress (FF31. (DBS...

DBS Programming Inst~~ctlons 
CPGA / 3.0 CF’C-B / 2.0 / 3.0 / 4.0 Section 400 FF3 
Issue 3 July 1993 
If an extension is set for Least Cost 
Routing, the user must dial “9”. or press 
an FF key that is set for the LCR h&ion, 
in order to gain access to a central office 
line. 
To set an extension port so that the dialing 
of a “9”. or the necessity to press an LCR 
key is not needed. enter: 
[FF3], (DBS eit&on port number)#, 
46, on 
Tosetanextensionportsothatthedialing 
of a “9”. or the necessity to...

Scction4OOFF3 
Issue3 
July1993 DBS I’m@ammiq Iustructions CFGA/ 3.0, CPGB /2.0 / 3.0 / 4.0 
DBS extensions can be set so that central 
office-line calls can only be made after 
entering a forced account code that is 
verified. Verification is enabled or 
disabled on an extension basis. 
To set an extension so that a verified 
forced account code is not needed to make 
a central of&e line call, enter: 
1. lDB6 exte!nsion DOIt numberI%, 
5#. on 
To set an extension so that a verified 
forced account code...

DBS Pro@ammh~ I.nstructions 
Section 400 FF3 
CPGA/ 3.0 CPGB / 2.0 / 3.0 / 4.0 
Issue 3 July 1993 
To be notified by a tone. when a new 
central o&e line call has anived at an 
extension that is currently engaged in a 
conversation, this option must be set. 
To disable extension 100, for example. for 
off hook signaling, enter: 
ml, I#* 7#,0# To 
send a tone from acaJling extension to 
an extension that is in use, this option 
must be set. A tone is not sent however, 
when off hookvoice announce is...

Section 400 FF3 DB3RogmmmhnInstructions 
Issue3July1993 WC-A / 3.0, CPGB /2-O / 3.0 / 4.0 
To be able to “barge into” an extension 
that is currently in use from another 
extension, this option must be enabled 
on the baruinq extension. 
To disable the use of the busy override 
option from extension 100, for example, 
enter: 
plea. l#. 9#,0# 
To enable the use of the busy override 
option from extension 100, for example. 
enter: 
pF31, lW, 9#, l# 
The busy override option cannot be 
disabled on the...

DBS Pro@ammin~ Instmctions 
CPCA / 3.0 CPGB / 2.0 / 3.0 / 4.0 Section 400 FF3 
Issue 3 July 1993 
Access to an available central office line 
assigned to the FFl key can be 
automatic by picking up the receiver. 
If the FFl key is a pooled trunk key, an 
available central office line is accessed 
in numerical order from the highest line 
number assigned to the key, to the 
lowest. 
To disable prime line pickup on 
extension 100, for example, enter: 
pF31. l#. ll#.O# 
To enable prime line pickup on...

Section 400 FF3 
Issue3 
July1993 DBS ~ogmumiq~ Instructiona 
WC-A / 3.0. CPC-B /2.0 /-3.0 / 4.0 
c 
To enable a DBS user to initiate a three 
party conference between 2 central office 
lines and his extension, this option must 
be set. Once the conference is initialized, 
the DBS msion user can drop out of the 
callbypmssingeitherofthecentralofficeline 
keysusedtocalltheoth~parties. 
To disable extension 100, for example, to 
not be able to initiate a three party 
conference, enter: 
mm 1#.13#.0# 
To...

DBS Ro@ammin~ Instructions 
CPGA / 3.0 CPGB / 2.0 / 3.0 / 4.0 Section 400 FF3 
Issue 3 July 1993 
Off-hook signaling volume can be set to 
either of four different levels. 
To set the off hook signal volume to the 
minimum level on extension 100, for 
example, enter: When off hook signaling is set on an 
extension, the tone pattern can be sent 
continuously or only once. 
To send a continuous tone pattern for 
an off hook signal to extension 100, for 
example, enter: 
wF3], 19, 15#, l# 
LFF31. 1#.16#.0#...

Section4OOFF3 DBS Ro@ammin~ Instructions 
Issue3July1993 WC-A/ 3.0, WC-B /2.0 13.0 / 4.0 
The large screen telephone can show 
either 5 or 10 personal speed dial names 
when this feature is chosen. 
To choose to display 5 names on a large 
display telephone that is at extension 
100, for example, enter: If an extension is to be included in one 
or more of the eight hunt groups, this 
option needs to be set. 
To exclude extension 100 from page 
group 0, for example, enter: 
m3],1#,18#,0# 
JFF31.1#.17#.0#...

DBS Pro@mmhg Inb-uctions 
CFGA/ 3.0 CPGB / 2.0 / 3.0 / 4.0 Section 400 
FF3 
Issue3 
July1993 
ThejXowing program options apply 
toI~dispZayte&phonesonZy. 
To include extension 100 in page group 
7. for example, enter: 
p3], I#, 25#, I# 
To reset Dagle IlrOuD inclusion to the 
default initialized value. Dress lFF3L 
IDBS extension Dart number)#, 
j18-25)#. O#. lON/OFFl: 
c  
I 
. -I 
To display soft key options on the large 
display telephone (VB-43225). when the 
phone is in the idle mode, this option...