Panasonic Digital Business System Section 300 Installation Guide

Section 400 FFl 
Issue 2 July 1993 DBS Ro@umning Instructions 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
The alternate attendant extension wiII 
have attendant features and can receive 
overfknv intercom calls if the primary 
attendant extension is busy. 
To enable an alternate extension, enter: 
pm], 2#, l#, 13#,0# 
To have no provision for an alternate 
attendant, enter: 
pFll. 2w. l#. 13w. l# 
This feature is not available if the 
*AttendwdFeaturePack~isusedwith 
CPC-B 2.00 or later software. 
CaIIs...

DBS Programming Instructions 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section 400 FFL 
Issue 3 July 1993 
Intercom calls from an extension (non 
attendant) telephone can be established 
with a ring tone or by voice. After the 
connection is established, the extension 
user can change from one to the other by 
dialing “1”. 
_. 
To set extension intercom caIls to “tone” 
calling, enter: 
[eel], 2w, I#, 15#, on 
Tosetextensionintercomcallingto”voice” 
caII.ing, enter: 
/ / 
Dll. 2#. l#. 1%. I# 
An alert tone...

Section 400 FFl 
Issue 2 July 1993 DBS Programming Instructions 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
Ifan active central office caIl is interrupted 
by another caller. on an extension set for 
busy override, an alert tone can precede 
the interruption. 
To have no alert tone preceding an 
interruption of an active central office 
line call, enter: When a “1” must be dialed preceding an 
areacode to make along distance call, this 
option must be set. 
If long distance dialing requires the 
dialing of a...

DBS Programming Instructions 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section 400 FFl 
Issue 3 July 1993 
Five or ten names can be displayed on the 
LCD telephone directory at once. When 10 
are chosen, the maximum length for each 
of the names is limited to 7 characters. 
To set LCD. directories for 5 name 
capability, enter: 
jFFll.an. l#. 19#.0# 
To set LCD directories for 10 name 
capability, enter: 
pFl],2#, l#, 19#, 1n 
. . 
To restrict a certain block of system speed 
dial numbers, see address [FFl]....

Section 400 FFl 
Issue 2 July 1993 
To set the transfer ring pattern to .8 sec. 
on burst / .2 sec. off, .8 sec. on / 2.2 sec. 
off enter: 
pm], 21, 1#,22#,2# 
To set the transfer ring pattern to .8 sec. 
on / 2.2 sec. off, enter:: 
pm]* 2#, 1#,22#,3# 
To set the transfer ring pattern to .8 sec. 
on / 3.2 sec. off, enter: 
[eel], 2w, 1#,22#,4# 
L... 
To set the transfer ring pattern to .8 sec. 
on / 5.2 sec. off, enter: 
(FF1].2#, 1#,22#,5# 
To set the transfer ring pattern to .8 sec. 
on / 3.2 sec. off...

DBS Programming I.nstnxtions 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 section 400 ITI 
Is6ue3July1993 
An alternate central office line ring 
pattern is assigned in the delayed 
ringing tables. 
To disallow the use of delayed ring 
assignments..in the DBS. enter: 
JFFll. 2W. 1#.23#.0# 
ToaUowtheuseofdelayedringass@mrents 
in the DBS, enten 
tFF1],2#, 1#,23#, l# 
. . . 
Delayed day ring programmmg is set at 
address [FF4], 5#. 
Delayed night ring programming is set at 
address [FF4], 6#. To set any DBS...

Section 400 FFl 
Issue 2 July 1993 
To set any DBS extension number to be 
the third attendant, this option must be 
used. 
To set extension 104 to be attendant 
position 3. for example, enter: 
pFl],2#, 1#,25#, 104# 
To reset the third attendant nosition to the 
default initialized value. 
press IFFll. 2#, 
l#. 25#. ICONFl. ION/OFFl. 
Installation of Attendant feature package 
software involves the removal of EPROM 
chip 1 from the CPC-B card, and 
substitution of the chip with one 
specifically...

DBS Programming Instructiox~ 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
Section4OO FFl 
Iesue 
3 July 1093 
To set any extension number to be the 
overflow position to which calls will flow 
when the attendant(s) are all busy, this 
option must be used. 
To set extension 106, for example, to be 
the overflow extension forthe attendant(s), 
enter: To set any attendant to be able to override 
an existing conversation on a non 
attendant telephone, this option must be 
used. 
To disable all designated attendant...

Section 400 FFl 
Issue 2 July 1993 DBS Programming Instructions 
CPC-A / 3.0. CPC-B / 2.0 /.3.0 / 4.0 
To set an FF key that has been designated 
as an alarm key on an attendant(s) 
telephone to light, this option must be 
used. 
To disable the alarm key(s) on attendant 
telephones from lighting, enter: 
pm], 2#, l#, 29#, on 
To enable the alarm key(s) on attendant 
telephones to light, enter: 
pml. 2w. l#, 29#. I# 
Lnstallation of Attendant feature package 
software involves the removal of EPROM 
chip...

DBS Programming Instructiom~ 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section 400 FFl 
Issue 3 July 1993 
Four digit Direct Inward Dial numbers 
can be set to ring at one extension port, or 
at multiple extension ports. 
To set DID numbers to only ring at one 
extension, enter: 
JFFll. 2W. 1#.32#.0# 
To set DID numbers to ring at multiple 
extensions, enter: 
ml],2#, 1#,32#, l# 
When this feature is set to ” 1”. all 
&e.nsion ports that have a DID number 
asigned will simultaneously ring on an 
inbound...