Panasonic Digital Business System Section 300 Installation Guide

Section 400 FFl 
DBS Rogmmmfng Instructions 
Issue 2 
July 1993 CPC-A / 3.0, CPGB / 2.0 / 3.0 / 4.0 
(FFl)-8-4-S-(1-64)-11 . . . . . . . . 
RBTSEND 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .._.......... 
Off . . . . . . . . . . . . . . . . . . . . . . . _ . . . . 83 
[FFlj-8-4-6-( 
l-64)-(0000-9999)-(100-699) DNIS NUMBER SET . . . . . . . . . . . . . . . . . . . . . . . .._.......... No Nos. Asstgned 
. . . . . 83 
[FF2]-(...

DBS Programming Instructions 
section 400 FFl 
WC-A/ 3.0, 
CPC-B / 2.0 / 3.0 / 4.0 
Issue 3July 1993 
(FF3]-(l-144)-39 . . . . . . . . . . . . . . . . . 
EXTENSION RING PAl-l-ERN (CPC-6 3.0) 
. . . . . . . . . . . . . . . . . . . . . . . . . . . 
[FF3]-(l-144)-40 .._.............. DIGKALSLTRECEMNG VOLUME (CPC-B 3.0) . . . . . . . . . . . . . . . . . . . . Emulates Line rtng..... 117 
Normal 
. . . . . . . . _..._ .._...... 
]FF3]-(l-144)-41 117 
. . . . . . . . . . . . . . . . . AUTO SET RELOCATlON CODE...

Section 400 FFl DBS Rogramming Instructions 
Issue 2 Jdy 1993 WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
[FF7]-4-( l-4) . . . . . . . . . . . . . . . . . . . .._. SPECIAL AREA CODE TABLE FOR TRS TYPES 3-6 . . . . . . .._.. 
No setting 
. . . . . . . . . . . . . . . . . . 
155 
/ 
[FF7]-5-n-4) . . . . . . .._ _ . . . . . ..__..... SPECIAL OFFICE CODE TABLE FOR TYPES 3-6 
. . . . . . . . . . . . . . . No set% . . . . . . . . . . ~ . . . . _.. 
156 
[FF7]-6-(l-50) . . . . .._..._.......... SPECIAL7 DIGVTABlE...

DBS Programming Instructions 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section 400 FFl 
Issue 3 July 1993 
3-l SYSTEM PROGRAM 
SETTINGS 
I 
To set the date to February25,1985, enter 
the Month, Day and Year as follows: 
FF1],1#,1#,022595# 
The correct day is automatically 
calculated from this information. 
To reset the dav/date to the default 
initialized value. Dress IFFll. l#. l#, 
JCONFl. ION/OFFl. 
The day and date are also printed on the 
Station Message Detail Recording 
(SMDR) printout. Proper LCR...

Section 400 FFl 
Issue 2 July 1993 DBS Programming Instruct.io~~ 
WC-A / 3.0, WC-B / 2.0 / 3.0 / 4.0 
Conversation time for central office calls 
will start to display 16 seconds after the 
completion of dialing the number, or 16 
seconds after the initial ring tone of an 
inbound call. The start timer can be set 
to 
16 seconds or 30 seconds. 
All incoming calls will start timing 16 
seconds after the initial ring tone, even if 
the call duration display is not activated. 
To set the SMDR/display timer...

DES Programming Instructions 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 Section 400 FFl 
Issue 3 July 1993 
Outbound calls can be automatically 
routed to special carriers when LCR is 
activated. To access a non LCR line for 
outbound calls, (when a “9” is dialed). 
enter: 
JFFll. 2#. I#. 39. 08 
To automatically access a LCR line for 
outbound calls, (when a “9” is dialed), 
enter: 
/’ cFF1],2#, I#, 3#, l# 
All LCRoptions are set at address number 
W-1. 
The 
use of LCR requires cutting the 
jumper on the CPC...

Section 400 FFl 
Issue 2 July 1993 DBS Programming Instructions 
CPC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
You have the option of displaying, on 
any LCD phone, the telephone number 
associated with SSD codes (80-89). This 
option also effects 
REDL&L and will 
display or not display accordingly 
when 
redialing one of these SSD codes. 
Telephone numbers associated with 
SSD codes (00-79). and all names 
associated with all SSD codes will 
’ always display. 
To display the telephone number 
associated with...

DBS Progmxmning Instructions 
Section 400 FFl 
CPC-A / 3.0. CPC-B / 2.0 / 3.0 / 4.0 
Issue 3 July 1993 
The one-touch call feature provides 
dialing to an extension by pressing a 
single programmable key, and is enabled 
by both settings. This feature cannot be 
deactivated. 
8’ 
An incoming call can be automatically 
transferred to another extensionbyplacing 
thecallonhold,dialingan&ensionnumber 
. . 
and hanging up. 
To disable automatic transferring of a call, 
to an internal extension, enter: 
pm],...

Section 400 FFl 
Issue 2 July 1993 DBS Pro@ammin. Instructions 
WC-A / 3.0, CPCB / 2.0 / 3.0 / 4.0 
Automatically places a central office-tie 
that is in use on system hold, when you 
press a ringing line key to answer a new 
inbound call. 
To disable the automatic hold feature for 
a call on an existing central oflIce line, 
when a new central office line call is 
ringing in, enter: 
pFlL 2#.1#,9#.0# 
To automatically place an existing central 
office line call on system hold, and to 
answer a new...

DBS Programming Instructions 
section 400 FF1 
WC-A / 3.0, CPC-B / 2.0 / 3.0 / 4.0 
Issue 3 July 1993 
To provide differing capabilities for SLT 
hookflash operation, this feature can be 
set to retrieve DBS dial tone, or to retrieve 
a central office line caller that has been 
placed on hold%-om this telephone. 
To activate the DBS intercom dial tone as 
a result of a SLT hookflash, enter: When installing more than 60 telenhones, 
you must use a 
3-digit (100-699) 
extension number dialing plan. For...