Panasonic DBS 824 Information Manual

Conference Calls DSLT Features
 
4-20 DBS 824-3.0/3.2-700 Revised April 2000
Conference Calls
(CPC-S and CPC-M)
Description
Conference Calls allow an extension user to add a party to an existing 
conversation.
DSLT users can create the following types of Conference Calls:
 One outside line and two extensions (three-party Conference Call)
 Two outside lines and one extension (three-party Conference Call)
 Three extensions (Intercom Conference Call)
Operation
To add an extension:
1. Press the HOLD
 key...

DSLT Features Dial “0” for AttendantDial 
Revised April 2000 DBS 824-3.0/3.2-700   4-21
Dial “0” for Attendant
(CPC-S and CPC-M)
Description
The Attendant can be called from any extension by pressing “0.”
If multiple attendants are assigned, dial “0” calls goes to Attendant “1” first. 
If attendant “1” is busy, the call then goes to Attendant “2.” The call 
continues to transfer to the next attendant in the attendant group, if necessary.
A maximum of four attendants can be assigned.
Operation
1.  Lift...

Do-Not-Disturb (DND) DSLT Features
 
4-22 DBS 824-3.0/3.2-700 Revised April 2000
2.  Dial “88” followed by the desired trunk number (01-08).
3.  Dial the outside number.
Do-Not-Disturb (DND)
(CPC-S and CPC-M)
Description
An extension can be made unavailable by activating Do-Not-Disturb (DND). 
Calls to extensions with DND activated receive busy tone.
Operation
To activate DND:
1.  Lift the handset or press ON/OFF
. 
2. Dial “73.”
3.  Replace the handset or press the ON/ OFF 
key.
To cancel DND:
1.  Lift...

DSLT Features Intercom Calling
Revised April 2000 DBS 824-3.0/3.2-700   4-23
differently, depending on whether they are trunk or intercom calls. 
Intercom calls receive busy tone; trunk calls are routed to the extension 
defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call 
forward settings:
-  Direct trunk calls
-  Transferred trunk calls.
 The DND feature cannot be activated at an extension selected to receive 
Call Forwarding.
Intercom Calling...

Last Number Redial DSLT Features
 
4-24 DBS 824-3.0/3.2-700 Revised April 2000
To make an Tone Call:
1.  Lift the handset.
2.  Dial the extension number.
3.  If the system default is voice calling, dial a “1.”
The called extension rings. 
Related Programming
 FF1 (System): Extension Intercom Calling
 FF1 (System): Alert Tone for Voice Calls
 FF1 (System): Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Assignment
Considerations
 When an extension’s calling mode is set...

DSLT Features Meet-Me Answer
Revised April 2000 DBS 824-3.0/3.2-700   4-25
2.  Dial a trunk access code (81-86 or 9).
3. Press the REDIAL
 key.
Considerations
 If the Auto Flash Redial feature is set, you can flash the outside line once 
by pressing the REDIAL
 key at the busy tone. The last number dialed can 
then be redialed.
 The Last Number Redial feature can redial a number up to sixteen digits 
long.
 A maximum of five Speed Dialing codes can be redialed.
Meet-Me Answer
(CPC-S and CPC-M)...

Message Waiting/Callback Request DSLT Features
 
4-26 DBS 824-3.0/3.2-700 Revised April 2000
 If an external paging system or a Universal Answer system has been 
installed, use Group Call Pickup to respond to the Paging call.
Message Waiting/Callback Request
(CPC-S and CPC-M)
Description
If you call an extension that is busy or does not answer, you can leave a 
message requesting a return call.
Operation
To leave a Callback Request:
1.  Lift the handset. 
2.  Dial the extension number.
3.  Dial “2” at...

DSLT Features Off-Hook Voice Announce (OHVA)Off-
Revised April 2000 DBS 824-3.0/3.2-700   4-27
4.  Replace the handset or press the ON/OFF
 key.
Related Programming
 FF1 (System): Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Setting
Considerations
 Up to four Callback Requests can be sent to one extension. 
 If you call the same extension a second time and the party answers, 
Callback Requests you sent earlier will be cancelled.
 If a Callback Request is sent to an...

Off-Hook Voice Announce (OHVA) DSLT Features
 
4-28 DBS 824-3.0/3.2-700 Revised April 2000
3.  Upon hearing busy tone, press “5.”
To transfer a call using OHVA 
1. Press the HOLD
 key.
2.  Dial the number of the extension to which the call will be transferred.
Your phone issues a busy tone if the extension is already on a call.
3.  Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the 
FLASH
 key to cancel the transfer.
4. Press...

DSLT Features Onhook Dialing
Revised April 2000 DBS 824-3.0/3.2-700   4-29
 You cannot toggle back and forth between two calls during an OHVA.
Onhook Dialing
(CPC-S and CPC-M)
Description
To use onhook dialing, press the ON/OFF
 key.
The DSLT does not have a microphone, so the user must lift the handset to 
talk.
Pooled Trunk Access
(CPC-S and CPC-M)
Description
The DBS 824 system is designed to accept from 4 to 8 outside lines. These 
lines can be divided into seven Pooled Trunk groups. The groups are...