Panasonic DBS 824 Information Manual

SLT Features Call Transfer
Revised April 2000 DBS 824-3.0/3.2-700   5-16
To use Screened Transfer when Onhook Transfer is disabled:
1.  Flash the switchhook to place the outside call on hold.
The phone issues intercom dial tone.
2.  Dial the extension number to which the call is to be transferred.
3.  When your call is answered, inform the third party of the transfer.
The EXT
 LED stops flashing and remains lit.
4. Dial “8.”
The third party need only pick up the handset to speak to the outside line.
5....

SLT Features Call Waiting
Revised April 2000 DBS 824-3.0/3.2-700   5-17
Call Waiting
(CPC-S and CPC-M)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a 
busy extension. The party receiving the message need only replace the 
handset and then pick it up again to be automatically connected to your 
extension.
The following messages can be sent using the Call Waiting feature:
Table 5-4.  Call Waiting Text Messages
Message codes 0-4 are not available.
Operation
To Set Call...

SLT Features Call Waiting
Revised April 2000 DBS 824-3.0/3.2-700   5-18
To answer Call Waiting (and disconnect the current call):
1.  Replace the handset.
The current call is disconnected.
2.  Pick up the handset.
You are automatically be connected to the extension sending the Call 
Waiting.
To answer Call Waiting (without disconnecting the current call):
1.  Flash the switchhook.
 The current call is disconnected.
 The new call is connected automatically.
2.  Flash the switchhook again to retrieve the...

SLT Features Camp-on
Revised April 2000 DBS 824-3.0/3.2-700   5-19
Camp-on
(CPC-S and CPC-M)
Description
If you reach a busy extension, you can use the Camp-on feature to alert you 
with a ring when the extension becomes free. You can then pick up your 
handset to automatically dial the extension.
Operation
To activate the Camp-on feature:
1.  Lift the handset. 
2.  Dial the desired extension number.
3.  Upon hearing busy tone, press “3.”
 The phone issues ringback tone.
 If the Camp-on feature is not...

SLT Features Conference Calls
Revised April 2000 DBS 824-3.0/3.2-700   5-20
 Camp-on cannot be activated to an extension that has call forwarding 
turned on.
 If an extension with call forwarding camps on to a busy extension, its 
camp-on reply is not forwarded.
 An extension can only have one call camped on at a time. For example, if 
Extension 152 camps on to Extension 153, another extension cannot camp 
on to 153, as long as 152 is camped on.
 An extension that has initiated a camp-on cannot...

SLT Features Dial “0” for Attendant
Revised April 2000 DBS 824-3.0/3.2-700   5-21
To add an outside number:
1.  Flash the switchhook to place the current call on hold.
2.  Dial a trunk group number (81-86 or 9).
3.  Dial the outside number.
4.  Flash the switchhook when your call is answered.
Related Programming
 FF3 (Extension): Single Line Telephone Hookflash
Considerations
 Call Waiting responses cannot be made during conference calls.
 A switchhook flash is ignored during a conference call.
...

SLT Features DTMF Stations
Revised April 2000 DBS 824-3.0/3.2-700   5-22
 FF1 (System): Second Attendant Position
 FF1 (System): Third Attendant Position
 FF1 (System): Fourth Attendant Position
 FF1 (System): Attendant Transfer Extension
DTMF Stations
(CPC-S and CPC-M)
Description
The DBS 824 supports DTMF extensions on SLTA analog extension ports. 
Dial Pulse extensions are not supported by the SLTA.
Related Programming
 FF2 (Trunk): DTMF/Pulse Dialing for Trunks
Considerations
 DP to DTMF Signal...

SLT Features Do-Not-Disturb (DND)
Revised April 2000 DBS 824-3.0/3.2-700   5-23
3.  Dial the outside number.
4.  Replace the handset.
Do-Not-Disturb (DND)
(CPC-S and CPC-M)
Description
An extension can be made unavailable by activating Do-Not-Disturb (DND). 
When DND is activated at an extension, calls to that extension receive busy 
tone.
Operation
To activate DND:
1.  Lift the handset. 
2. Dial “73.”
3.  Replace the handset.
To cancel DND:
1.  Lift the handset. 
2. Dial “73.”
3.  Replace the handset....

SLT Features Intercom Calling
Revised April 2000 DBS 824-3.0/3.2-700   5-24
 DND and Absence Messages cancel Call Forwarding.
Calls to an extension with DND or Absence Message turned on are treated 
differently, depending on whether they are trunk or intercom calls. 
Intercom calls receive busy tone; trunk calls are routed to the extension 
defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call 
forward settings:
-  Direct trunk calls
-  Transferred...

SLT Features Last Number Redial
Revised April 2000 DBS 824-3.0/3.2-700   5-25
To make an Tone Call:
1.  Lift the handset.
2.  Dial the extension number.
3.  If the system default is voice calling, dial a “1.”
The called extension will ring.
Related Programming
 FF1 (System): Extension Intercom Calling
 FF1 (System): Alert Tone for Voice Calls
 FF1 (System): Extension Class of Service
 FF3 (Extension): Extension Class of Service Assignment 
Considerations
 When an extension’s calling mode is set for...