Panasonic DBS 824 Information Manual

Call Park DSLT Features
 
4-10 DBS 824-3.0/3.2-700 Revised April 2000
Related Programming
 FF1 (System): Non-appearing Central Office Line Hold
 FF1 (System): Recall Timer for Extension-Held Intercom Calls
 FF1 (System): Recall Timer for Extension-Held CO Calls
 FF1 (System): Trunk Line Automatic Hold (Key Bank Hold)
Considerations
 A held call will recall if it is not retrieved before the Hold Recall Timer 
expires.
 If there is no response to the Hold Recall tone, the tone is issued at the...

DSLT Features Call ParkCall 
Revised April 2000 DBS 824-3.0/3.2-700   4-11
Operation
To park a call:
1. Press the HOLD
 key.
2. Dial “75.”
To retrieve a parked call:
1.  Lift the handset. 
The phone issues intercom dial tone.
2. Dial “76.”
3.  Dial the number of the extension that parked the call.
Related Programming
 FF1 (System): Attendant Park Hold Recall Timer
 FF1 (System): Extension Park Hold Recall Timer
Considerations
 An alarm tone is issued if a parked call is not released before the Park...

Call Pickup DSLT Features
 
4-12 DBS 824-3.0/3.2-700 Revised April 2000
Call Pickup
(CPC-S and CPC-M)
DSLTs can use both directed and group call pickup.
Direct Call Pickup
Description
A call to an extension can be answered from any other extension with the 
Direct Call Pickup feature. 
Operation
1.  Lift the handset. 
2. Dial “79.”
3.  Enter the number of the ringing extension.
Related Programming
 FF1 (System): Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Assignment...

DSLT Features Call PickupCall 
Revised April 2000 DBS 824-3.0/3.2-700   4-13
Group Call Pickup
Description
Use the Group Call Pickup feature, to answer calls to other extensions within 
your Paging Group (01-07) without entering the number of the extension that 
is ringing.
Operation
1.  Lift the handset. 
2. Dial “70.”
Related Programming
 FF1 (System): Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Assignment
 FF3 (Extension): Extension Page Group
Considerations
 If...

Call Transfer DSLT Features
 
4-14 DBS 824-3.0/3.2-700 Revised April 2000
Call Transfer
(CPC-S and CPC-M)
The DBS 824 provides two call transfer methods: blind transfer and screened 
transfer.
Blind Transfer
Description
Blind transfer allows the transfer of a call directly to an extension, without 
waiting for the called extension to answer.
Operation
1. Press the HOLD
 key to place the call on hold.
2.  Dial the extension number to which the call is to be transferred.
3.  Replace the handset before the...

DSLT Features Call TransferCall 
Revised April 2000 DBS 824-3.0/3.2-700   4-15
 You can transfer a call to an extension that has Call Forwarding activated. 
The transferred call will follow the call forwarding path of the extension it 
is transferred to. 
For example, if extension “A” is forwarded to extension “B,” calls that are 
transferred to extension “A” will be forwarded to extension “B.”
 When you transfer a call to an extension that does not answer and does not 
have Call Forwarding activated,...

Call Waiting DSLT Features
 
4-16 DBS 824-3.0/3.2-700 Revised April 2000
4. Dial “8.”
The third party need only pick up the handset to speak to the outside line.
5.  Replace the handset.
Related Programming
 FF1 (System): Onhook (Automatic) Transfer
 FF1 (System): Recall Timer for Extension -Transferred CO Calls
 FF1 (System): Recall Timer for Extension -Transferred CO Calls
Considerations
 You cannot transfer a call to an extension that has Do Not Disturb or 
Absence Message activated.
 You can...

DSLT Features Call WaitingCall 
Revised April 2000 DBS 824-3.0/3.2-700   4-17
Table 4-4.  Call Waiting Text Messages
Message codes 0-4 cannot be used.
Operation
To Set Call Waiting:
1.  Lift the handset.
2.  Dial the extension number.
3.  Upon hearing busy tone, press “3.”
4.  If you wish to send a text message, dial the desired message code (5-7 or 
9).
The message appears on the called party’s phone if the called party has a 
display phone. (If the extension does not have a display, it will continue to...

Camp-on DSLT Features
 
4-18 DBS 824-3.0/3.2-700 Revised April 2000
 The new call is connected automatically.
2. Press HOLD
 again to retrieve the first call.
Related Programming
 FF1 (System) Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Assignment 
 FF3 (Extension): Call Waiting/OHVA
Considerations
 Call Waiting can be used without entering a message code.
 An extension that has DND activated, has a call on hold, is ringing (from 
another call), or is engaged in...

DSLT Features Camp-on
Revised April 2000 DBS 824-3.0/3.2-700   4-19
 If the Camp-on feature is not available, the phone continues to issue 
busy tone.
4.  Replace the handset after you hear the ringback tone.
To answer the callback ring:
Pick up the handset when you hear the callback ring.
The system automatically dials the called extension.
Related Programming
 FF3 (Extension): Call Waiting/OHVA
Considerations
 The callback ring must be answered within sixteen seconds or it will be 
canceled.
 A...