Panasonic DBS 824 Information Manual

Reminder Call DSLT Features
 
4-30 DBS 824-3.0/3.2-700 Revised April 2000
 FF3 (Extension): Forced Least Cost Routing
 FF8 (LCR): LCR Settings (all)
Considerations
 There are seven groups of outside lines: 9 and 81-86. Some additional 
outside lines may not be assigned to a group.
 Dialing “9” activates LCR if the LCR option is enabled.
Reminder Call
(CPC-S and CPC-M)
Description
With the Reminder Call feature, your telephone can act as an alarm clock.
Operation
To Set the Reminder Call feature:
1....

DSLT Features Saved Number Redial
Revised April 2000 DBS 824-3.0/3.2-700   4-31
Considerations
 A sixteen-second alarm tone will be issued at the specified time.
 One Reminder Call may be set for each telephone.
 To change the Reminder Call, enter a new time.
 If the extension is in use when the reminder call is scheduled, the reminder 
call is sent as soon as the extension becomes available.
Saved Number Redial
(CPC-S and CPC-M)
Description
You can save a previously dialed number for later...

Speed Dialing DSLT Features
 
4-32 DBS 824-3.0/3.2-700 Revised April 2000
 Any previously saved number is erased when a new number is saved.
 The Saved Number Redial feature can redial a number up to sixteen digits 
long.
 A maximum of five Speed Dialing codes can be stored.
Speed Dialing
(CPC-S and CPC-M)
Personal Speed Dialing
Description
Frequently called numbers can be stored using the Personal Speed Dial 
feature. With the CPC-S and CPC-M in the standard mode, up to 10 Personal 
Speed Dial...

DSLT Features Speed Dialing
Revised April 2000 DBS 824-3.0/3.2-700   4-33
6. Press HOLD
.
7.  Replace the handset or press ON/OFF
.
To delete a Personal Speed Dial number:
1.  Lift the handset or press ON/OFF
. 
2. Press *
.
3. Dial “80.”
4.  Dial the personal speed dial number (90-99 or 900-939).
5. Press HOLD
.
6.  Replace the handset or press ON/OFF
.
Related Programming
 FF7 (Toll Restrictions): Toll Restrictions (all)
 FF10 (Speed Dialing): Personal Speed Dial Numbers
Considerations
 Personal...

Speed Dialing DSLT Features
 
4-34 DBS 824-3.0/3.2-700 Revised April 2000
Operation
To dial a system speed dial number:
1.  Pick up the handset.
2.  If necessary, access an outside line.
3. Press AUTO
.
4.  Dial the system speed dial code (00-89 or 000-199).
Related Programming
 FF1 (System): Override Toll Restriction with SSD Numbers
 FF10 (Speed Dialing): System Speed Dialing 

Revised April 2000 DBS 824-3.0/3.2-700   5-1
Chapter 5. SLT Features
This chapter describes features that are available with single-line telephones 
(SLTs). 
Single-line telephones are industry-standard 2500 sets (touch tone required). 
SLTs are not equipped with feature keys or line keys, so basic telephone 
operations are performed by pressing dialpad keys and/or using the 
switchhook.
This chapter covers the following topics:
Topic Page
Absence Message 5-3
Busy Override 5-6
Call Forwarding 5-7
Call...

5-2 DBS 824-3.0/3.2-700 Revised April 2000 

SLT Features Absence Message
Revised April 2000 DBS 824-3.0/3.2-700   5-3
Absence Message
(CPC-S and CPC-M)
Description
SLT users can leave text messages on their phones when they are away.
When the unattended extension is dialed by a key phone, the text message 
appears on the caller’s phone.
One of the following messages can be selected. Messages 5 to 9 can be 
changed through system programming.
Table 5-1.  Absence Messages 
Operation
To Set an Absence Message
1.  Lift the handset. 
2. Dial “71.”
3....

SLT Features Absence Message
Revised April 2000 DBS 824-3.0/3.2-700   5-4
To Cancel an Absence Message
1.  Lift the handset. 
2. Dial “71.”
3.  Replace the handset.
Related Programming
 FF1 (System): Extension Class of Service
 FF3 (Extension): Extension Class of Service Assignment 
 FF6 (Names and Messages): Absence Messages
Considerations
 Extensions without displays get a busy signal, rather than the Absence 
Message.
 If a message code number that has not been assigned a text message is...

SLT Features Auto Redial
Revised April 2000 DBS 824-3.0/3.2-700   5-5
settings:
-  Direct trunk calls
-  Transferred trunk calls.
Auto Redial
(CPC-S and CPC-M)
Description
If the Redial key is pressed when the extension is idle or receiving dial tone, 
the last intercom or outside number is automatically redialed.
Related Programming
 FF3 (System): Auto-Redial on Extensions
 FF1 (System): Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Assignment
Auto-Repeat Dial
(CPC-S...