Panasonic DBS 824 Information Manual

ML/MCO Separation Key Telephone Features 
3-54 DBS 824-3.0/3.2-700 Revised April 2000
 If another phone answers an incoming trunk call, the ML LED on your 
extension goes off and the ringing stops, indicating that the Multi-Line key 
on your telephone is no longer in use.
 When dialing an extension number with ML keys, the system 
automatically selects the free Multi-Line key with the lowest number and 
flashes its LED green. If a sceond call comes in from another extension, 
the next lowest ML key...

Key Telephone Features Message Waiting/Callback Request
Revised April 2000 DBS 824-3.0/3.2-700   3-55
Operation
1.  Pick up the handset from any extension at which you hear the Paging call.
The phone issues intercom dial tone.
2. Press “77.”
 Paging ceases and you are connected to the party trying to reach you.
 The EXT
 LED lights.
Related Programming
 FF1 (System): Extension Class of Service Setting
 FF3 (Extension): Extension Class of Service Assignment 
Considerations
 The Meet-Me Answer feature...

Message Waiting/Callback Request Key Telephone Features 
3-56 DBS 824-3.0/3.2-700 Revised April 2000
Operation
To leave a Callback Request:
1. Press the ON/OFF
 key.
2.  Dial the extension number.
“Call-EXT XXX,” “Busy-EXT XXX” or “Talk-EXT XXX” (where 
“XXX” is the extension) appears on the display.
3.  Dial “2” at the busy tone or while the telephone is still ringing.
“Accept Message” appears on the display.
4. Press the ON/OFF
 key.
The Message Waiting lamp flashes at the called extension.
To answer a...

Key Telephone Features Message Waiting/Callback Request
Revised April 2000 DBS 824-3.0/3.2-700   3-57
 The phone issues intercom dial tone.
 The ON/OFF
 LED lights.
2. Press the CONF
 key twice.
The most recent Callback Request appears on the display.
3. Press the ON/OFF
 key.
The ON/OFF
 LED goes off.
4.  Repeat steps 2 and 3 to view other Callback Requests.
To cancel a Callback Request:
1. Press the ON/OFF
 key.
 The phone issues intercom dial tone.
 The ON/OFF
 LED lights.
2. Press the AUTO
 key....

Non-Appearing Outside Lines Key Telephone Features 
3-58 DBS 824-3.0/3.2-700 Revised April 2000
 If a Callback Request is sent to an extension for which Call Forwarding is 
set, the Callback Request will be automatically forwarded to the 
designated extension.
 You can send a Callback Request to an extension that has Do Not Disturb 
or Absence Message activated.
Non-Appearing Outside Lines
(CPC-S and CPC-M)
Description
Non-appearing outside lines are trunks that are not assigned to a dedicated FF 
key...

Key Telephone Features Offhook Signaling
Revised April 2000 DBS 824-3.0/3.2-700   3-59
Offhook Signaling
(CPC-S and CPC-M)
Description
Offhook signaling sends a tone to a busy extension to indicate that another 
CO call has arrived.
Operation
When you receive an offhook signal during a call, do the following:
1.  Put the first call on hold.
2.  Press the flashing FF key for the CO line of the incoming call.
For details about handling multiple calls, see “Call Hold” on page 3-14.
Related Programming
 FF3...

Offhook Voice Announce (OHVA) Key Telephone Features 
3-60 DBS 824-3.0/3.2-700 Revised April 2000
Offhook Voice Announce (OHVA)
(CPC-S and CPC-M)
Description
You can interrupt a busy extension when making an Intercom Call, and then 
use the Offhook Voice Announce (OHVA) feature make an announcement 
that only the called party can hear. You can also transfer a held call to a busy 
extension after making the announcement using this feature.
Operation
To make an OHVA:
1.  Pick up the handset.
2.  Dial the...

Key Telephone Features Offhook Voice Announce (OHVA)
Revised April 2000 DBS 824-3.0/3.2-700   3-61
To transfer a call using OHVA 
1. Press the HOLD
 key to place the call to be transferred on hold.
2.  Dial the number of the extension to which the call will be transferred.
If the extension is already engaged in a call, your phone issues busy tone.
3.  Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the 
FLASH
 key to cancel the...

One-Touch Keys Key Telephone Features 
3-62 DBS 824-3.0/3.2-700 Revised April 2000
 You cannot receive a Call Waiting message during an OHVA. (“Denied” 
will appear on the display of the extension trying to send the Call Waiting 
message.)
One-Touch Keys
(CPC-S and CPC-M)
Description
One-Touch Keys can be used to store telephone numbers, speed dial 
numbers, or feature access codes.
To dial the stored number, the user goes offhook and presses the desired key.
Operation
To program a One-Touch key for...

Key Telephone Features One-Touch Keys
Revised April 2000 DBS 824-3.0/3.2-700   3-63
2. Press the PROG
 key.
3.  Press the One-Touch key to be programmed.
4. Press the AUTO
 key.
5.  Enter the System Speed Dial Number to be programmed.
6. Press the HOLD
 key.
7. Press the ON/OFF
 key.
The ON/OFF
 LED goes off.
To assign two System Speed Dial numbers to a single One-Touch 
key:
1. Press the ON/OFF
 key.
 The phone issues intercom dial tone.
 The ON/OFF
 LED lights.
2. Press the PROG
 key.
3.  Press the...