Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Lnapter 1. system rrogramming (t f- i )section 400~Wogrammlng
Programming
FFI 2# 1# 11# (0 or l)#
t
O=A second SLT hookflash results in dial tone.
l=A second SLT hookflash retrieves a held call.
Page 1-16
DBS Manual - Issued 8/l/95DBS-70-400 

Section 400-ProgrammingChapter 1. System Programming (FFl)
Extension Number Digits
Software Version: Ail VersionsAddress: 
FFl 2# l# 12# (0 or l)##
DescriptionThis address determines whether the DBS will use 2-digit or 3-digit extension
numbers.
lIf 2-digit numbers are used, a maximum of 60 extension numbers are
available for assignment. Number Range: 10 
thru 69.
lIf 3-digit numbers are used (default setting), a maximum of 600 extension
numbers are available. Number Range: 100 
&u-u 699.
Programming
FFl...

Chapter 1. System Programming (FFl)Section 400-Programming
Alternate’ Attendant
Software Version:CPC-A and CPC-B Versions Prior to 2.0Address: 
FFl 2# l# 13# (0 or l)#
DescriptionUse this address to enable or disable the use of an Alternate Attendant phone.
By default, the Alternate Attendant is enabled.
When enabled, the Alternate Attendant phone receives overflow intercom
calls from the Primary Attendant. The Alternate Attendant also has full
access to Attendant features.
Programming
II
FFI 2# 1# 13#...

Section 400-Programming
Chapter 1. System Programming (FFI)
Attendant Intercom Calling
Software Version: All VersionsAddress: 
FFl 2# l# 14# (0 or l)#Description
Use this address to determine how intercom calls from an Attendant phone
are announced at extension phones -- by ringing the extension, or by
immediately establishing a voice path over the extension loudspeaker. By
default, a voice path is established when an Attendant dials an extension.
After the connection is established, the Attendant can...

uapter 1. system rrogrammlng (t-i- 1)section 400~Wogramming
Extension Intercom Calling
Software Version: Ail VersionsAddress: 
FFl 2# I# 15# (0 or l)#
DescriptionUse this address to determine how intercom calls from another extension will
be announced at extension phones -- by ringing the extension, or by
imrnediately establishing a voice path over the extension loudspeaker. By
default, a voice path is established when an extension dials another extension
-- the called party can hear and talk to the...

Section 400-Programming
Chapter 1. System Programming (FFl)Alert Tone for Voice Calls
Software Version: All VersionsAddress: 
FFl 2# l# 16# (0 or l)#
DescriptionUse this address to determine whether voice intercom calls are preceded by
an initial alert (“splash”) tone. By default, the alert tone is enabled.
The alert tone (if enabled) will be sounded for 0.5 seconds before the caller’s
voice path is established.
Programming
II
FFl 2# l# 16# (0 or l)#
f
O=Alert tone is disabled.
l=Alert tone is enabled....

Chapter 1. System Programming (FFl)Section 400-ProgrammingAlert Tone for Busy Override 
& OHVA
Software Version: All VersionsAddress: 
FFI 2# l# 17# (0 or l)#
DescriptionThis address determines if Attendant Override, Busy Override, and Offhook
Voice Announce (OHVA) calls are preceded by an alert tone. By default, the
alert tone is disabled.
This feature is governed by state law --
some states require the alert tone.
Programming
FFl 2# I# 17# (0 or l)#
O=Alert tone is disabled.
l=Alert tone is enabled....

Section 400-ProgrammingChapter 1. System Programming (FFl)System Installation Area Code
Software Version: All VersionsAddress: 
FFl 2# 1# 18# (0 or l)#
DescriptionThis address determines if the DBS site requires a “1” to be dialed before the
area code to make long-distance calls. This setting will affect the way the
DBS handles Toll Restriction (TRS) 
and Least Cost Routing (LCR) for long-
distance calls.
In almost all cases, the default setting (“1” must be dialed) should not be
changed.
Programming
FFl...

ChapterSSD Name Display
Software Version: AH VersionsAddress: 
FFl 2# l# 19# (0 or l)#
DescriptionTJse this address to determine how many SSD (System Speed Dial) names can
be displayed at a time on large-display phones, whenever an SSD menu is
displayed.
When 5 names are displayed (default setting), the maximum length for each
name is 16 characters. When 10 names are displayed, the maximum length
for each name is 5 characters.
Programming
FFl 2# l# 19# (0 cy l)#
O=Displays 5 SSD names.
l=Displays 10 SSD...

Section 400-ProgrammingChapter 1. System Programming (FFI)
APVAEC Slot Assignment
software VetSiOn:CPC-A Version 3.3 or higher; CPC-All; and CPC-B Version 5.0 or higherAddress: 
FFl 2# 1# 20# (2-9 or 2-18)#
DescriptionThis program is only used with third-party API applications. Its purpose is to
designate which Analog Extension Card (AEC) is used for voice channel
connections to the API product.
Programming
1
FFl 2# l# 20# (2-9 oy 2118)#
t
Analog Extension Slot used for voice
paths to a third-party API...