Panasonic Courier Manager Installation Manual

PanaVoice Courier                                                                           Installation Manual 120
NETWORKING:  NOVELL, NT & 98 SE
Networking the Courier together with other computers allows you to run the User
Interface remotely.  Other optional Courier components may also utilize a network
connection.  When installing the Courier on a network, care should be given to providing
adequate security to the files on the Courier computer.
Assuming that the networking hardware is in place and...

PanaVoice Courier                                                                           Installation Manual 121
The Courier machine is shipped with 192.168.0.9 for the IP address, and 255.255.255.0
for the Subnet Mask.
In order to network to the Courier as it ships with its default settings, an IP address within
the range of 192.168.0.1 -192.168.0.254 (with the exception of 192.168.0.9) may be
used for the IP address on other machines.
The Subnet Mask must be the same as the Courier machine...

PanaVoice Courier                                                                           Installation Manual 122 To test a network connection for proper setup after all work has been done:
1. Mouse click on Start.
2. Highlight Programs.
3.  Scroll to MsDOS icon.  Double mouse click.
4.  A DOS window will appear.  C:\windows > will be seen.
5.  At the prompt, type:  ping 192.168.0.9
If the network connections and protocols are working properly, there will be a response
time.  Otherwise, the response...

PanaVoice Courier                                                                           Installation Manual 123
INSTALLING UPDATES TO SOFTWARE
All updates/upgrades will be provided to Panasonic.  The Hotline Technical Support staff
will be able to give information as to location of upgrades via Internet or availability of
media for upgrades
Upgrades will be distributed in two methods:  1) Install Shield installations; 2) Self -
extracting zip files.
Should you be upgrading the number of ports or...

PanaVoice Courier                                                                           Installation Manual 124
SETTING THE JUMPERS
The following procedure is the first step in setting the jumpers on the voice board
included with your upgrade.
Start Showjump by left mouse clicking on Start, Programs, Rhetorex, Showjump
(Diagram 1).
(Diagram 1)
Select the board type and the next available I/O address.  Normally the second board
should be 301, the third 302, the fourth 303 (Diagram 2).
(Diagram 2)...

PanaVoice Courier                                                                           Installation Manual 125
CONFIGURATION OF HARDWARE
JUMPERS
Note position of jumpers on the voice board.  After using showjump, set the jumpers to
the next available I/O address as shown in showjump.
Shut down the Courier using the proper shutdown through the Service Overlord.
Shut down Windows using the proper shut down procedure.
PHYSICAL INSTALLATION OF HARDWARE FOR UPGRADE
MACHINE DISASSEMBLY
Remove the screws...

PanaVoice Courier                                                                           Installation Manual 126                                       (Diagram 5)
Diagram 5 shows the unused slots.
DRIVER CONFIGURATION
Reboot the machine, and shut down the Courier.
                                           (Diagram 6)
 Diagram 6 shows clicking on the Start menu, Rhetorex, and Configuration Wizard 

PanaVoice Courier                                                                           Installation Manual 127                                       (Diagram 7)
The level of drivers is shown in Diagram 7.
          (Diagram 8)
Clicking Next will show current boards loaded.  (Diagram 8.)
                                 (Diagram 9)
Clicking Add will add the new voice board.  (Diagram 9) 

PanaVoice Courier                                                                           Installation Manual 128 A listing of all Rhetorex/Brooktrout voice boards will be shown in the next screen.
(Diagram 10)  Select the appropriate voice board.  (Diagram 11)
                  (Diagram 10)                                                         (Diagram 11)
After adding the board, reboot the machine. 

PanaVoice Courier                                                                           Installation Manual 129
NON-API SETUP AND TEST ROUTINE
Power Up Courier
Passes Power Up
SequenceProperly power down
Courier and reseat the
PC cards and power up
the unit againPasses Power Up
Sequence
Is system
 API Integrated
Program DBS Hunt
Group & Connect
Ports in Sequential
Order
Does Courier
Answer
Dial Hunt Group
Is Hunt Group
Correctly
ProgrammedCorrect
Programming
Disconnect Courier
and Check Analog
Port...