Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

61
Camera Function 
(Shortcut Function)
The following function is available only when specified cam-
eras with the camera function feature are used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Enter the desired camera function number by pressing
the numeric buttons.
Note:When you select a wrong number, press the
CLEAR button to clear the numeric input.
3. Pres the CAM FUNC/SYS FUNC...

62
Running Sequence
Tour Sequence
The following functions are available if a Tour Sequence has
been previously configured through the admin console. Any
Tour Sequence can be assigned to any monitors.
1. Select the desired monitor. (Refer to p. 56 Monitor
Selection.)
2. To select the desired Tour Sequence number, press
the numeric buttons.
Note: When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
3. Press the TOUR SEQ/GROUP SEQ button. The Tour
Sequence will run in...

63
Note:You can also return to spot monitoring by select-
ing a camera.
Notes:
•Group sequences should contain group presets with
the same group of monitors.
•If two or more group sequences are assigned to the
same monitor, only one group sequence can run at a
time.
•Group sequences do not support the switchover and
restore functions.Call Group Preset
Refer to p. 78 Menu Function Details for how to operate.
Number of characters displayed on the monitor screen dif-
fers depending on systems.
•GX System...

64
Alarm Control
Alarm Selection
To control alarm behaviors, you need to select a desired
alarm number.
1. Select a desired alarm number by pressing the numer-
ic buttons. 
2. Press the ALARM/ALM SUSPEND button. 
The current status of selected alarm will be displayed
on the LCD.
Armed:The system is armed for alarm response.
Active:Alarm has been triggered and activated
assigned alarm response.
Ack:Alarm is acknowledged and an operator can con-
trol the alarm action.
Reset:Activated alarm is reset, but...

65
To arm or disarm all alarms
Every time you press the ALARM/ALM SUSPEND but-
ton while holding down the SHIFT button, all alarms will
be armed or disarmed.
Note:To arm or disarm an alarm, activate Allow Disarm for
the alarm. (Refer to the Admin ConsoleUsers Guide
for details.)
To Operate Alarm-related
Camera (ACK)
You can operate the camera associated with the alarm
action as follows:
1. Perform Step 1 and 2 of Alarm Selection.
2. Enter a desired alarm action number by pressing the
numeric buttons....

66
Alarm History Table
There are 1000 alarm records stored in chronological order
in 125 pages of table.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Press the ALM RECALL button. AlarmHist will appear
on the LCD, and the ALARM HISTORY table will be dis-
played on the active monitor.
ALM:Logical alarm number
STATE:Indicates alarm state changes.
ARMED:The system is armed for alarm response.
ACTIVE:Alarm has been triggered and activated
assigned alarm response.
ACKED:Alarm is...

67
WJ-HD300A Series Control
Central Processing Unit WJ-MPU955A can control Digital
Disk Recorder WJ-HD300ASeries.
Recorder Selection
To control this recorder, you need to perform the operations
described in Recorder Selection.
You can select a recorder by performing either of the fol-
lowing.
•Recorder auto selection
•Recorder manual selection
Recorder Auto Selection
1. Select a camera whose picture you wish to play back.
(Refer to p. 56 Camera Selection.)
2. Press the PLAY/PAUSE button.
The recorder...

68
•To display the spot playback picture, press the numer-
ic button corresponding to the desired channel num-
ber, then press the ENTER button. Then, the active
camera number will appear on the LCD.
•To select the next channel number, press the + button.
•To select the previous channel number, press the –
button.
Multiscreen Segment Switching
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the MULTI SCREEN button. Every time you press
the button, the multiscreen segment patterns...

69
Manual Recording
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the REC button. Recording will start.
3. To stop the recording, hold down the REC button for 2
seconds.
Note:Refer to the Operating Instructions of recorder
for details and other recording modes.
Marking
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note: If you have performed...

70
Available buttons and functions (Text information)

CAM (SET), MON (ESC), or EXIT button:Returns to
the upper menu.
Note:Text editing is not available.
Available buttons and functions (DATA COPY window)

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
CAM (SET) button:Executes the selection and starts
data copy. (If OK is selected) / Cancels the selec-
tion and returns to the upper menu. (If CANCEL is
selected)
MON (ESC) or EXIT button:Cancels the selection...