Home
>
Panasonic
>
Network Hardware
>
Panasonic Central Processing Unit Wj Mpu955a Operating Instructions
Panasonic Central Processing Unit Wj Mpu955a Operating Instructions
Here you can view all the pages of manual Panasonic Central Processing Unit Wj Mpu955a Operating Instructions. The Panasonic manuals for Network Hardware are available online for free. You can easily download all the documents as PDF.
Page 41
41 CONFIGURATION DETAILS
Page 42
42 Notes: •Normally, maintain the default configuration. •When modifying the configuration, refer to experienced system administrators. Configuration File Modification The system configuration file is referred to as the SYS.INI file. It contains system-wide configuration information, and can be modified by the system administrators through the admin console. (Refer to the Admin Console Users Guide.) The CPU contains default SYS.INI file. (Refer to p. 43.) The CPU should work with the default system...
Page 43
![Page 43
43
Text appearing in blue is explanatory, and not part of the sys.ini file.
Interface section
The CPU can incorporate up to three Ethernet network interface cards.
[INTERFACES]
***{ Number of interfaces in the system}
Numinterfaces=3
The number used here is the number of the Ethernet ports on MPU955A CPU.
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate...](http://img.usermanuals.tech/thumb/58/69468/w300_wj-mpu955a_en_om_d-42.png "Page 43
43
Text appearing in blue is explanatory, and not part of the sys.ini file.
Interface section
The CPU can incorporate up to three Ethernet network interface cards.
[INTERFACES]
***{ Number of interfaces in the system}
Numinterfaces=3
The number used here is the number of the Ethernet ports on MPU955A CPU.
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate...")
43
Text appearing in blue is explanatory, and not part of the sys.ini file.
Interface section
The CPU can incorporate up to three Ethernet network interface cards.
[INTERFACES]
***{ Number of interfaces in the system}
Numinterfaces=3
The number used here is the number of the Ethernet ports on MPU955A CPU.
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate...
Page 44
![Page 44
44
Procs section
This section tells the system which interface is to be used by certain process files.
[PROCS]
***{ Process Interface Assignments }
***{ Format: = }
***{ Set these three to the interface_num of the Ethernet keyboards: }
Keybp=1
Mxconts=1
Mxpfw=1
1 means interface1 in [INTERFACES] section. MPU955A CPU has 3 software processes (listed above) to commu-
nicate to a CU950. All processes should use same interface number. Factory default setup is interface 1.
***{ Set Swcpu to the same...](http://img.usermanuals.tech/thumb/58/69468/w300_wj-mpu955a_en_om_d-43.png "Page 44
44
Procs section
This section tells the system which interface is to be used by certain process files.
[PROCS]
***{ Process Interface Assignments }
***{ Format: = }
***{ Set these three to the interface_num of the Ethernet keyboards: }
Keybp=1
Mxconts=1
Mxpfw=1
1 means interface1 in [INTERFACES] section. MPU955A CPU has 3 software processes (listed above) to commu-
nicate to a CU950. All processes should use same interface number. Factory default setup is interface 1.
***{ Set Swcpu to the same...")
44
Procs section
This section tells the system which interface is to be used by certain process files.
[PROCS]
***{ Process Interface Assignments }
***{ Format: = }
***{ Set these three to the interface_num of the Ethernet keyboards: }
Keybp=1
Mxconts=1
Mxpfw=1
1 means interface1 in [INTERFACES] section. MPU955A CPU has 3 software processes (listed above) to commu-
nicate to a CU950. All processes should use same interface number. Factory default setup is interface 1.
***{ Set Swcpu to the same...
Page 45
![Page 45
45
TimeDateFormat=1
***{ Time-Hour Display format }
***{ Format: TimeHourFormat= }
***{ format 0 - 12 Hour }
***{ format 1 - 24 Hour }
TimeHourFormat=0
UNIT section
Note:This section should not be changed.
[UNIT]
***{ The unit ID should be the same as the one defined in }
***{ the Global Admin database for this unit. }
***{ For single-unit systems, use ID=1. (ID=0 is invalid) }
ID=1
LOG section
This section sets the frequency with which log files are saved to hard disk. The defaults below...](http://img.usermanuals.tech/thumb/58/69468/w300_wj-mpu955a_en_om_d-44.png "Page 45
45
TimeDateFormat=1
***{ Time-Hour Display format }
***{ Format: TimeHourFormat= }
***{ format 0 - 12 Hour }
***{ format 1 - 24 Hour }
TimeHourFormat=0
UNIT section
Note:This section should not be changed.
[UNIT]
***{ The unit ID should be the same as the one defined in }
***{ the Global Admin database for this unit. }
***{ For single-unit systems, use ID=1. (ID=0 is invalid) }
ID=1
LOG section
This section sets the frequency with which log files are saved to hard disk. The defaults below...")
45
TimeDateFormat=1
***{ Time-Hour Display format }
***{ Format: TimeHourFormat= }
***{ format 0 - 12 Hour }
***{ format 1 - 24 Hour }
TimeHourFormat=0
UNIT section
Note:This section should not be changed.
[UNIT]
***{ The unit ID should be the same as the one defined in }
***{ the Global Admin database for this unit. }
***{ For single-unit systems, use ID=1. (ID=0 is invalid) }
ID=1
LOG section
This section sets the frequency with which log files are saved to hard disk. The defaults below...
Page 46
![Page 46
46
ALARMTEXTDISPLAY section
This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action text.
There is a 38 character maximum for alarm text.
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format: AlarmTextDisplay= }
***{ option 0 - Display Alarm Text only }
***{ option...](http://img.usermanuals.tech/thumb/58/69468/w300_wj-mpu955a_en_om_d-45.png "Page 46
46
ALARMTEXTDISPLAY section
This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action text.
There is a 38 character maximum for alarm text.
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format: AlarmTextDisplay= }
***{ option 0 - Display Alarm Text only }
***{ option...")
46
ALARMTEXTDISPLAY section
This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action text.
There is a 38 character maximum for alarm text.
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format: AlarmTextDisplay= }
***{ option 0 - Display Alarm Text only }
***{ option...
Page 47
![Page 47
47
SNTP section
Note: This section should not be changed.
This section allows changes to Simple Network Time Protocol parameters, if SNTP is implemented.
[SNTP]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ This section lists user-defined client SNTP values, }
***{ sync rates and an external server address. }
***{ }
***{ Format: (VALUES INTERNAL TO THIS UNIT) }...](http://img.usermanuals.tech/thumb/58/69468/w300_wj-mpu955a_en_om_d-46.png "Page 47
47
SNTP section
Note: This section should not be changed.
This section allows changes to Simple Network Time Protocol parameters, if SNTP is implemented.
[SNTP]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ This section lists user-defined client SNTP values, }
***{ sync rates and an external server address. }
***{ }
***{ Format: (VALUES INTERNAL TO THIS UNIT) }...")
47
SNTP section
Note: This section should not be changed.
This section allows changes to Simple Network Time Protocol parameters, if SNTP is implemented.
[SNTP]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ This section lists user-defined client SNTP values, }
***{ sync rates and an external server address. }
***{ }
***{ Format: (VALUES INTERNAL TO THIS UNIT) }...
Page 48
ID 48 Control VideoOSD This section indicates the default contents of sample650.adm (sample database for WJ-SX650 512x64 Full Matrix System) that is included on the CD-ROM. SX650 SUBNODES Default Database Contents (WJ-SX650 512 x 64 Full Matrix System) 1 2 3 4 5 6I/F 0 0 0 0 0 0IPA 192.168.200.1 192.168.200.2 192.168.200.3 192.168.200.4 192.168.200.5 192.168.200.6BRIDGE – – 1-32 – – 33-64CONTROL 1-256 257-512 – – – ––OSD – – 1-32 – – 33-64SWITCH ALARM Input Output 1-32– – – – – – 1-32 - 33-64 33-64 –...
Page 49
Timeout 49 ID MONITORS 1 2 3 4 5 : : 63 64Area 0 0 0 0 0 : : 0 0Local 1 2 3 4 5 : : 63 64Switch SX650 SX650 SX650 SX650 SX650 : : SX650 SX650Port 1 2 3 4 5 : : 63 64 ID 100 955Password 100 955Priority 100 300:00:00 00:00:00Name Normal SuperClass 1: Normal 2: Super OPERATORS
Page 50
ID Switch 50 ID This section indicates the contents of sample.adm (sample database for GX system) that is included on the CD-ROM. GX DEVICES Database Contents (GX System) (NTSC Model Only) 1 2 3 4 5 6I/F 0 0 0 0 0 0IPA 192.168.1.1 192.168.1.2 192.168.2.1 192.168.2.2 192.168.3.1 192.168.4.1EA 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00 00:00:00:00:00:00ENC Input port 1 - 4 5 - 8 9 - 12 13 - 16 – –DEC Output port – – – – 1 - 4 5 - 8GXDIN Input port – – – – –...