Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

51
ID
1Area
0Priority
3Boot File
–Model
WV-CU950IPA
172.18.0.200EA
00:80:45:0D:D0:01Port
0
ID CONTROLLERS
Note:Actual MAC address that is indicated on a product should be entered in the EA field.
1
2
3
4
5
6
7
8Area
0
0
0
0
0
0
0
0Local
1
2
3
4
5
6
7
8Switch
GX
GX
GX
GX
GX
GX
GX
GXPort
1
2
3
4
5
6
7
8
MONITORS
OPERATORS
Timeout
ID
100
955Password
100
955Priority
100
300:00:00
00:00:00Name
Normal
SuperClass
1: Normal
2: Super 

52
DIGITAL RECORDERS
1
15
16 14 13 109 7
12 116
1
2
3
4
5
8 ID Logical
1Model
WJ-HD316AVideo
Switch Port
GX16IPA
172.18.0.60Unit
Address
1Digital
Bitrate
6.144
Channels
15
– 14 13 109 7
12 116
1
2
3
4
5
8 Cam 

53
OPERATING PROCEDURES
(with WV-CU950) 

54
LCD Display Descriptions
Default Status (LCD Display
After Login)
qMonitor number
The number of connected monitor is displayed.
wUnit number/Status
The number of connected site will be displayed.
eCamera number
The number of selected camera is displayed.
rInput number/Recorder number/Status
The numeric input, selected recorder number, or status
is displayed.
Blinking
In this document, grayed (greyed) areas on the LCD illus-
trations mean blinking.
Messages Displayed on the
LCD
The following are...

55
Operation Start (Login)
1. Turn on the power switches of all system components.
2. Turn on the power of system controller. (Refer to the
Operating Instructions.)
The OPERATE indicator will light up, and the following
message will appear on the LCD.
Note:Wait unitl the following display appears on the LCD.
3. Enter the ID number by pressing the numeric buttons.
Then, press the CAM (SET) button. PWD will appear
on the LCD.
Note:When you have entered a wrong ID number,
press the CLEAR button.
4. Enter...

56
After the login procedure, the following operations are avail-
able to control the system.
The operation begins with monitor selection. Then, the
image of selected camera appears on the active monitor.
Monitor Selection
1. Select the desired monitor number by pressing the
numeric buttons. The entered number will appear on
the LCD.
2. Press the MON (ESC) button. 
When the selected monitor number is correct, < is dis-
played.
Note:To select the next or previous monitor number, press
the + or – button....

57
Adjustment of LCD Display and Buzzer
You can perform the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer.
(Refer to WV-CU950 Operating Instructions for how to adjust.)
Display Setting for Controller 

58
Camera Site Accessories Control
Lens Control
Notes:
•Check that a specified lens, with motorized zoom/focus
functions, is mounted on the camera, and the lens
selection (DC/VIDEO) on the camera is set to DC. 
•Available functions differ depending on cameras. Refer
to the Operating Instructions of camera.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Press the FOCUS FAR or NEAR button while watching
the monitor. The lens focus is adjusted to...

59
4. Press the PRESET/PGM PRESET button while holding
down the SHIFT button. The preset position will be
saved.
Note:If the entered position number has stored the previ-
ous preset position, it will be overwritten by the new
one.
Call Preset Position
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. To select the desired preset position number, press the
numeric buttons.
Notes:
•When you have selected a wrong number, press
the CLEAR button to clear...

60
Defroster Control
The following procedure is available when a selected cam-
era (housing) is equipped with a defroster.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Pressing the DEF ON/OFF button.
The defroster will be activated.
3. To deactivate the defroster, press the DEF ON/OFF
button while holding down the SHIFT button.
Note:The defroster will be automatically deactivated
when the temperature reaches the specified
degrees.
Auxiliary...