Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

11
System type This document will provide the product information about WJ-SX650 512 x 64 Full Matrix System and GX System.
• Admin Console Users Guide
• MPEG2 Encoder WJ-GXE900/MPEG2 Decoder WJ-GXD900 Operating Instructions (NTSC model only)
• Time Management Utility Users Guide
• Digital Disk Recorder WJ-HD300ASeries Operating Instructions
• Matrix Switcher WJ-SX650 Series Operating Instructions
References
The following diagram shows the available system types and components for WJ-SX650 512 x 64 Full...

12
This page intentionally left blank. 

13
FEATURES OF WJ-SX650 512 x 64 FULL
MATRIX SYSTEM AND GX SYSTEM 

14
Main Features
Operator Functions
Operator Area Changes
The system can be divided into multiple areas (up to 64),
and an operator can change from one area to another if
they have the necessary permission. 
Operator Log On and Off
Operators are assigned a user ID and password by a sys-
tem administrator. A user ID and password are required for
any operator to log on to the system. System administrators
can specify to automatically log operators off if there is no
activity for a pre-defined time...

15
Tour Sequences
Program the Tour Sequences
This function allows administrators to program tour
sequences, and store them in the system database.
The WJ-MPU955A can execute 20 tour sequence steps in
around one second. If the WJ-MPU955A is asked to per-
form more than 20 steps in a single second, it will automati-
cally form 20-step groups, and alternate their execution
over a period of two or more seconds.
Tour Sequence Operation
The tour sequence operation includes start, stop, pause,
run, next...

16
Standard System
Standard System contains one CPU. It can handle up to 256 encoder devices, up to 64 decoder devices, one administration
station, and up to 64 system controllers. The IP addresses in the following diagram are the default addresses of the CPU net-
work ports.
Note:MPEG2 Encoder (WJ-GXE900) and MPEG2 Decoder (WJ-GXD900) support the NTSC model only.
GX System Examples (NTSC Model Only)
SIGNAL GND
POWERON
OFF3 3 1
4 21
4 2VIDEO OUT AUDIO OUT MIX
RESET
1000BASE-T
100BASE-TXV+ – GQUAD
SIGNAL...

17
Redundant System
Redundant System requires two CPUs. It can also handle up to 256 encoder devices, up to 64 decoder devices, one adminis-
tration station, and up to 64 system controllers.
SIGNAL GND
POWERON
OFF3 3 1
4 21
4 2VIDEO OUT AUDIO OUT MIX
RESET
1000BASE-T
100BASE-TXV+–GQUAD
SIGNAL GND
POWERON
OFF3 3 1
4 21
4 2VIDEO OUT AUDIO OUT MIX
RESET
1000BASE-T
100BASE-TXV+–GQUAD
10BASE-T/100BASE-TX
SERIAL
21 OTHER SYSTEM
DEVICE SYSTEM
CONTROLLERPOWER
ON
AC IN OFFSIGNAL GND
10BASE-T/100BASE-TX
SERIAL
21...

18
Ethernet Controllers
• WJ-MPU955A supports Panasonic Ethernet controllers.
• Up to 64 system controllers are connectable in the system.
• IP addresses will be automatically provided to each system controller during the communication with the CPU.
Available System Controllers 

19
This system contains one CPU. The CPU can handle up to four SX650 sub nodes and two SX650 bridge nodes, one admin
console and up to 64 system controllers.
Each sub node should equip one Network Board WJ-PB65E01 to communicate with the CPU through the Ethernet wiring.
WJ-SX650 512 x 64 Full Matrix System Example
Not used
Not used
Video Input Board (8)
Video Input Board (7)
Video Input Board (6)
Video Input Board (5)
Video Input Board (4)
Video Input Board (3)
Video Input Board (2)
Video Input Board...

20
This page intentionally left blank.