Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

71
7. Select a desired recording event by performing one of
the following.
•Move the 3D joystick controller to up or down.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
Note:To move to the next or previous page, perform
either of the following.
•Move the zoom wheel controller to the right or left.
•Rotate the shuttle ring clockwise or counterclock-
wise.
8. Press the PLAY button.
The playback of selected recording event will start.
9. To exit the search mode, press the MON...

72
VMD search
Recording events will be searched by the date and time
when a camera detected the brightness-level change.
Then, a result list or a thumbnail will be displayed.
For playback, you will select a time and date displayed on
the result list or thumbnail. Filtering is available by camera
channel, date-and-time, detection area or search mode.
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Repeat pressing the SEARCH/T&D SEARCH button
until the VMD search  list window is displayed...

73
Note:To delete the motion detection area, select
DELETE AREA on the status bar by rotating the
JogDial  or pressing the +/– button. Then, move the
+ mark to the desired area with the joystick, and
press the CAM (SET) button.
10. Select SENSITIVITY on the status bar by performing
either of the following.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
Note:Depending on the position of the set detection
areas, the sensitivity indications of the detection
areas may be...

74
Note:To move to the next or previous page, perform
either of the following.
•Move the zoom wheel controller to the right or left.
•Rotate the shuttle ring clockwise or counterclock-
wise.
4. Press the PLAY button.
The playback of selected recording event will start.
5. To exit the search mode, press the MON (ESC) or EXIT
button. 
The live image will be displayed again on the monitor.
Thumbnail window
To change a list (recording event list, VMD search list, or
marking search list) to the thumbnail,...

75
System Function
1. Select the recorder. (Refer to p. 67Recorder Selection.)
2. Enter the desired function number.
3. Press the CAM FUNC/SYS FUNC button while holding
down the SHIFT button. The system function of
recorder will be executed.
Notes:
•Refer to the operating instructions of recorder for
details on available functions and function numbers.
•If you have entered 4 digits or more, last 3 digits are
available.
Other Functions
Displaying WJ-HD300ASeries 
SETUP MENU
To display WJ-HD300ASeries...

76
Disk Selection
You will specify a disk of recorder for search playback.
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Press the MENU button repeatedly repeatedly until
HD300 DiskSelect appears on the LCD.
3. Press one of the F1 to F4 buttons.
The specified disk will be selected.
Available buttons and functions
F1: Nr-A
Specifies the normal or event recording area for play-
back.
F2: Cp-A
Specifies the copy area for playback.
F3: Cpy1
Specifies the external recording device connected...

77
Menu Function Descriptions
Menu Functions
To Recall Menu Functions
1.  Press the MENU button. CamMenu menu will appear
on the LCD.
2. Press the MENU button repeatedly until a desired
menu appears. (Refer to pages 
78to 82.)
Notes: 
•When you press the MENU button repeatedly while
holding down the SHIFT button, each menu will appear
in the reverse order.
•You can also select the menu by rotating the JogDial
clockwise or counterclockwise.
3. Perform the operations to activate the selected func-
tion....

78
Menu Function Details
Camera Setup
Notes:
•The following function requires the use of cameras sup-
porting this function.
•The details on the setup menu differ depending on
camera models. Refer to WV-CU950/650 Operating
Instructions and the Operating Instructions of camera
for available controls on the camera setup menu.
1. Select a desired monitor. (Refer to p. 
56Monitor
Selection.)
2. Display CamMenu menu. (Refer to Step 1 and 2 of p.
77To Recall Menu Functions.)
3. Select a desired function by...

79
Patrol Learn
1. Select a desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Display Patrol menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
3. Press the F1 (Start) button.
The patrol learn setup will start.
4. Perform desired camera operations by moving the 3D
joystick or zoom wheel controller, etc.
The following controls are available for patrol learn.
•Panning/Tilting (3D joystick)
•Iris control (IRIS OPEN/CLOSE buttons)
•Focus control (FOCUS...

80
Alarm Status Table
The table shows the alarm statuses.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Display AlmStat menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F3 buttons.
Available buttons and functions
F1: On
Opens the ALARM STATUS table.
F2: Off
Closes the ALARM STATUS table.
F3: Blk
Changes the monitor background beween camera
images and black picture.
NAME:Alarm text
(Refer to p. 66 for other...