Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

							71
7. Select a desired recording event by performing one of
the following.
•Move the 3D joystick controller to up or down.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
Note:To move to the next or previous page, perform
either of the following.
•Move the zoom wheel controller to the right or left.
•Rotate the shuttle ring clockwise or counterclock-
wise.
8. Press the PLAY button.
The playback of selected recording event will start.
9. To exit the search mode, press the MON (ESC) or EXIT
button. 
The live image will be displayed again on the monitor.
Searching filter windows
Available controls and functions (TIME&DATE FILTER-
ING window)

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
+ button: Increments a parameter.
– button: Decrements a parameter.
CAM (SET) button:Executes the filtering.
MON (ESC) or EXIT button:Cancels the filtering and
returns to the upper menu.

3D joystick upward (D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick leftward (A):Moves the cursor to the left.
3D joystick rightward (B):Moves the cursor to the
right.
Available controls and functions (CAMERA FILTERING
window)
JogDial clockwise or counterclockwise:Changes the
camera number, pointed by the cursor, between On
and OFF.
+ button: Increments a parameter.
– button: Decrements a parameter.
CAM (SET) button:Executes the filtering.
MON (ESC) or EXIT button:Cancels the filtering and
returns to the upper menu.

3D joystick upward (D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick leftward (A):Moves the cursor to the left.
3D joystick rightward (B):Moves the cursor to the
right.
Available controls and functions (REC EVENT FILTER-
ING window)

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
+ button: Increments a parameter.
– button: Decrements a parameter.
CAM (SET) button:Executes the filtering.
MON (ESC) or EXIT button:Cancels the filtering and
returns to the upper menu.

3D joystick upward (D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick leftward (A):Moves the cursor to the left.
3D joystick rightward (B):Moves the cursor to the
right.
Available controls and functions (TEXT FILTERING win-
dow)

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
+ button: Increments a parameter.
– button: Decrements a parameter.
CAM (SET) button:Executes the filtering.
MON (ESC) or EXIT button:Cancels the filtering and
returns to the upper menu.
START
JAN103
SET : [SET]  CANCEL : [ESC]
00 00  TIME&DATE FILTERING
..:AM
END
JAN 1 03 0 00..:AM
1
2345678
91011 12 13 14 15 16
CAMERA FILTERINGCAMERA
SET : [ SET ]      CANCEL : [ ESC ]
SET : [ SET ]      CANCEL : [ ESC ]
REC EVENT FILTERING
OFF
ON
ON
ON
ON
ON
ON
EMERGENCYVMD
TERMINAL
COMMAND
VIDEO LOSSMANUALSCHEDULE
TEXT FILTERING
WITHOUT TEXT
SET : [ SET ]      CANCEL : [ ESC ] 
						

							72
VMD search
Recording events will be searched by the date and time
when a camera detected the brightness-level change.
Then, a result list or a thumbnail will be displayed.
For playback, you will select a time and date displayed on
the result list or thumbnail. Filtering is available by camera
channel, date-and-time, detection area or search mode.
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Repeat pressing the SEARCH/T&D SEARCH button
until the VMD search  list window is displayed on the
monitor. The recorder will enter the searching mode.
3. Press the CAM (SET) button.
The VMD search window will be displayed on the moni-
tor.
4. Enter a camera number and time range.
Available controls and functions 

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
+ button: Increments a parameter.
– button: Decrements a parameter.
PLAY/PAUSE button:Executes the VMD search and
returns to the upper menu.
STOP button: Stops the VMD search.
MON (ESC) or EXIT button:Cancels the VMD search
and returns to the upper menu.

3D joystick upward (D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick leftward (A):Moves the cursor to the left.
3D joystick rightward (B):Moves the cursor to the
right.5. Press the CAM (SET) button.
The motion detection area setup window will be dis-
played.
Note:If no image was recorded in the time range set in
step 4, the motion detection area setup window will
not be displayed.
6. Select SETUP AREA on the status bar by performing
either of the following.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
A + mark will appear at the center (centre) of the mon-
itor.
Note:To set all displayed areas as motion detection
areas, press the CAM (SET) button after selecting
ALL AREAS.
7. Move the + mark to a desired area with the 3D joy-
stick, and then press the CAM (SET) button. The start
point of motion detection area will be determined.
8. Move the + mark to another desired area with the 3D
joystick, and then press the CAM (SET) button again.
The end point of motion detection area will be deter-
mined.
9. To configure more motion detection areas, repeat Step
7 and 8. (Up to 4 motion detection areas are available.)
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chCAM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARK
VMD SEARCH
TOTAL APR.25.03*12:34:56 AM  APR.25.03*12:34:56 AM12345
START CAMERA
JAN
CAM1
103
SET : [SET]    SEARCH : [PLAY]    CANCEL : [ESC]
12 00  SELECT CAMERA & DATE
..:AM
END
JAN 1 03 12 00..:AM 
						

							73
Note:To delete the motion detection area, select
DELETE AREA on the status bar by rotating the
JogDial  or pressing the +/– button. Then, move the
+ mark to the desired area with the joystick, and
press the CAM (SET) button.
10. Select SENSITIVITY on the status bar by performing
either of the following.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
Note:Depending on the position of the set detection
areas, the sensitivity indications of the detection
areas may be displayed overlapping each other.
11. Select the motion detection area by moving the 3D joy-
stick to the right or left.
12. Select the sensitivity by performing either of the follow-
ing.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
The sensitivity will be applied.
OFF:The motion detector is not activated on the
camera channel.
LOW:The sensitivity level is low.
MID:The sensitivity is level is medium.
HIGH:The sensitivity level is high.
13. To exit the motion detection area setup window, press
the CAM (SET) button.
The motion detection mode setup window will be dis-
played on the monitor.
Notes:
•To cancel the motion detection area setup, press
the MON (ESC) button. The VMD search list window
will be displayed again on the monitor.
•Refer to the units operating instructions for details
on each detection mode.14. Select a desired detection mode with the 3D joystick,
and select a desired parameter by performing either of
the following.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
15. Press the CAM (SET) or PLAY/PAUSE button.
The motion detection mode will be determined, and the
VMD search list window will be displayed again on the
monitor.
Notes: 
•Refer to Step 2 for the screenshot.
•To cancel the setting and return to the motion
detection area setup window, press the MON (ESC)
or EXIT button.
16. Select a desired recording event by performing one of
the following.
•Move the 3D joystick controller up or down.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
Note:To move to the next or previous page, perform
either of the following.
•Move the zoom wheel controller to the right or left.
•Rotate the shuttle ring clockwise or counterclock-
wise.
17. Press the PLAY button.
The playback of selected recording event will start.
18. To exit the search mode, press the MON (ESC) or EXIT
button. 
The live image will be displayed again on the monitor.
Marking search
The recording time of the recorded images with a marked
point will be displayed in a list or a thumbnail. For playback,
you will select the desired recording time to play. (Refer to
the recorders operating instructions for details on marking.)
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Repeat pressing the SEARCH/T&D SEARCH button
until the marking list window is displayed on the moni-
tor. 
The recorder will enter the searching mode.
3. Select the desired marked time by performing one of
the following.
•Move the 3D joystick controller up or down.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
VECTOR
 ANY AREA
MASKING DURATION
SET : [SET]    SEARCH : [PLAY]    CANCEL : [ESC]
20
 VMD SEARCH
s
 
DURATION
24H
A
20sB20sCD
20sA20sB20sC20sDTIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chCAM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARKTOTAL APR.25.03*12:34:56 AM  APR.25.03*12:34:56 AM12345 
						

							74
Note:To move to the next or previous page, perform
either of the following.
•Move the zoom wheel controller to the right or left.
•Rotate the shuttle ring clockwise or counterclock-
wise.
4. Press the PLAY button.
The playback of selected recording event will start.
5. To exit the search mode, press the MON (ESC) or EXIT
button. 
The live image will be displayed again on the monitor.
Thumbnail window
To change a list (recording event list, VMD search list, or
marking search list) to the thumbnail, press the F1 button.
The monitor display will become as follows.
Available controls and functions

Shuttle ring clockwise:Moves to the next page.
Shuttle ring counterclockwise:Moves to the previous
page.
JogDial clockwise or counterclockwise:Moves the
cursor.
+ or – button:Moves the cursor.
PLAY/PAUSE button:Starts playback of the record
pointed by the cursor.
MON (ESC) or EXIT button:Exits the search mode
and returns to the upper menu.
F1 button:Changes the monitor display to the list.

3D joystick upward (D):Moves the cursor to the left.
3D joystick downward (C):Moves the cursor to the
right.
3D joystick leftward (A):Moves the cursor to the left.
3D joystick rightward (B):Moves the cursor to the
right.
Zoom wheel controller to the right:Moves to the next
page.
Zoom wheel controller to the left:Moves to the previ-
ous page.
Canceling Filters
Refer to p. 76Menu Function Details.
Time & Date Search Playback
You can search playback images by entering a desired
recording date and time.
Note:To cancel the entry, press the MON (ESC) or EXIT
button. The LCD display will return to the normal status.
1. Press the SEARCH/T & D SEARCH button while holding
down the SHIFT button. The time-and-date entry form
will appear on the LCD.
2. Move the cursor to a position to be edited by perform-
ing either of the following.
•Move the 3D joystick controller to the right or left.
•Rotate the shuttle ring clockwise or counterclock-
wise.
3. Enter the desired date and time by performing either of
the following.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
4. Press the PLAY/PAUSE button. The image on the speci-
fied date and time will be played back on the active
monitor.
After the image has been played back, the LCD will
return to the default status.
Mmm/DD/YYYY HH:MM  
Mar/17/2004 12:00 AM
Mmm/DD/YYYY HH:MM 
Mar/16/2004 01:32 PM 
						

							75
System Function
1. Select the recorder. (Refer to p. 67Recorder Selection.)
2. Enter the desired function number.
3. Press the CAM FUNC/SYS FUNC button while holding
down the SHIFT button. The system function of
recorder will be executed.
Notes:
•Refer to the operating instructions of recorder for
details on available functions and function numbers.
•If you have entered 4 digits or more, last 3 digits are
available.
Other Functions
Displaying WJ-HD300ASeries 
SETUP MENU
To display WJ-HD300ASeries SETUP MENU, follow the
procedure below.
1. Select the recorder. (Refer to p. 
67Recorder Selection.) 
2. Press the MENU button repeatedly until System Setup
appears on the LCD.
3. Press the F1 button.WJ-HD300ASeries SETUP MENU will appear on the
active monitor, and B mark will light up beside On.
The following functions and buttons are valid in SETUP
MENU.

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
CAM (SET) button:Executes the selections and dis-
plays a submenu.
+ button:Increments a parameter.
– button:Decrements a parameter.
MON (ESC) button:Returns to SETUP MENU or the
previous menu.

3D joystick upward (D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick to the left (A):Moves the cursor to the left.
3D joystick to the right (B):Moves the cursor to the
right.
CLEAR button:Deletes a character when editing a
camera title, user ID, or password, etc.
6. To end the setting and return to the normal view, press
the F2 button when SETUP MENU is displayed. B
mark will disappear from the LCD.
HD300 Setup      300
  On 
5Off
HD300 Setup      300
 
5On  Off 
						

							76
Disk Selection
You will specify a disk of recorder for search playback.
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Press the MENU button repeatedly repeatedly until
HD300 DiskSelect appears on the LCD.
3. Press one of the F1 to F4 buttons.
The specified disk will be selected.
Available buttons and functions
F1: Nr-A
Specifies the normal or event recording area for play-
back.
F2: Cp-A
Specifies the copy area for playback.
F3: Cpy1
Specifies the external recording device connected to
the COPY1 port of recorder.
F4: Cpy2
Specifies the external recording device connected to
the COPY2 port of recorder.
MON (ESC)
Cancels search playback and recovers the default LCD
status.
EXIT
Cancels search playback and recovers the default LCD
status.
4. When you specify a disk, the search list display will
appear on the active monitor, and Search Mode menu
will appear on the LCD. Then, perform the search play-
back operation. (Refer to p. 
69Search Playback.)
A - B Repeat Playback
You can playback the recorded images repeatedly by
specifying the start point (A) and end point (B).
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Press the MENU button repeatedly until HD300 A – B
repeat appears on the LCD.Note:To cancel the setting and exit HD300 A – B
repeat, press the MON (ESC) or EXIT button. The
LCD display will return to the default status.
3. During playback, press the F1 button at the point you
wish to start playback. The playback start point (A) will
be set.
Note:To cancel the start point, press the F4 button.
4. Press the F2 button at the point you wish to end play-
back. The playback end point (B) will be set, and the
repeat playback will be performed between (A) and (B).
Canceling Filters
During the filtering playback, the searching filter will be
temporarily canceled (cancelled) or recovered.
Notes:
•This function is available only during filtering playback.
•You can change the ON/OFF setting during playback
and playback pause.
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Press the MENU button repeatedly until HD300 Listed
appears on the LCD.
3. Press the F2 button.
The searching filter will be canceled (cancelled), and
B mark will light up beside Off.
Notes:
•To recover the searching filter, press the F1 button. 
The searching filter will be recovered, and B mark
will light up beside On.
•To cancel the setting and exit HD300 Listed, press
the MON (ESC) or EXIT button. The LCD display will
return to the default status.
HD300 DiskSelect 301
Nr-A Cp-A Cpy1 Cpy2
Search Mode 
Thumb     Text Copy
HD300 A—B Repeat 302
Start End    Cancel
HD300 Listed    303
  On  Off
HD300 Listed    303
  On  Off 
						

							77
Menu Function Descriptions
Menu Functions
To Recall Menu Functions
1.  Press the MENU button. CamMenu menu will appear
on the LCD.
2. Press the MENU button repeatedly until a desired
menu appears. (Refer to pages 
78to 82.)
Notes: 
•When you press the MENU button repeatedly while
holding down the SHIFT button, each menu will appear
in the reverse order.
•You can also select the menu by rotating the JogDial
clockwise or counterclockwise.
3. Perform the operations to activate the selected func-
tion. The operating procedure differs depending on
each function. (Refer to pages 
78to 82.)4. To exit the menu, press the EXIT or MON (ESC) button.
The LCD display will return to the default status.
CamMenu:         001
  On 
5Off Rst  A.Rst
No. Function
001 Camera Setup
002 Auto Mode
003 BW Mode
004 Patrol Control
005 Group Preset
006 OSD Control
007 Digital Output
008 Alarm Status
009 Video Loss Status
010 System Status
011 Video Loss History
012 Area Change
013 Operator ID
014 Controller ID
015 System Version 
						

							78
Menu Function Details
Camera Setup
Notes:
•The following function requires the use of cameras sup-
porting this function.
•The details on the setup menu differ depending on
camera models. Refer to WV-CU950/650 Operating
Instructions and the Operating Instructions of camera
for available controls on the camera setup menu.
1. Select a desired monitor. (Refer to p. 
56Monitor
Selection.)
2. Display CamMenu menu. (Refer to Step 1 and 2 of p.
77To Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F4 buttons. 
Available buttons and functions
F1: On
Opens the setup menu of selected camera.
F2: Off
Closes the setup menu of selected camera.
F3: Rst
•Displays the special menu.
•To restore the default camera position, move the
cursor to REFRESH on the camera setup menu by
moving the 3D joystick. Then, press this button.
F4: A.Rst
To reset all the camera settings to the factory default,
move the cursor to CAMERA RESET on the camera
setup menu by moving the 3D joystick. Then, press this
button.
Note:Depending on the camera model, CAMERA
RESET is not displayed on the camera setup menu.
In this case, the F4 button is unavailable.
Auto Mode
1. Select a desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Display Auto Mod menu. (Refer to Step 1 and 2 of p.
77To Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F4 buttons. Available buttons and functions
F1: Seq
Activates the sequence mode.
F2: Sort
Activates the sort mode.
F3: Pan
Activates the auto pan mode.
F4: Patrol
Activates the patrol mode.
BW Mode
1. Select a desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Display BW Mode menu. (Refer to Step 1 and 2 of p.
77To Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F4 buttons. 
Available buttons and functions
F1: On
Changes the camera image from color (colour) to black
and white.
F2: Off
Changes the camera image from black and white to
color (colour).
F3: Auto1
Activates Auto 1 mode. (The camera selects black and
white mode if the picture is dark, or color (colour) mode
if the picture is bright enough.)
F4: Auto2
Activates Auto 2 mode. (The camera detects the light
source type to prevent malfunction. This setting is
applicable when using a near-infrared light source in a
dark place.)
CamMenu:         001
  On 
5Off Rst  A.Rst
AutoMod:         002
 Seq Sort Pan Patrol  
BW Mode:         003
  On Off Auto1 Auto2   
						

							79
Patrol Learn
1. Select a desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Display Patrol menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
3. Press the F1 (Start) button.
The patrol learn setup will start.
4. Perform desired camera operations by moving the 3D
joystick or zoom wheel controller, etc.
The following controls are available for patrol learn.
•Panning/Tilting (3D joystick)
•Iris control (IRIS OPEN/CLOSE buttons)
•Focus control (FOCUS FAR/NEAR buttons)
•Zoom control (Zoom wheel controller)
Note:The available total time of patrol learn differs
depending on cameras. When the time is over, the
patrol learn setup will automatically stop.
5. To quit the patrol learn setup, press the F2 (Stop) but-
ton.
Group Preset
Note: This function is available only when Group Preset set-
ting has been established through the admin console.
(Refer to the AdminConsole Users Guide.)
A Group Preset determines which monitor is to be assigned
to which camera. Therefore, monitor selection is not
required.
1. Display GrpPre menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
2. Select a desired Group Preset number by pressing the
numeric buttons.
3. Press the F1 (Set) or CAM(SET) button to activate a
selected Group Preset function.
The preset position of assigned cameras will be dis-
played simultaneously on the assigned monitors.
OSD Control
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Display OSD menu. (Refer to Step 1 and 2 of p. 77 To
Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F4 buttons. 
Available buttons and functions
F1: T&D
Displays or hides the clock (time and date) display.
F2: Cam
Displays or hides the camera ID (camera number and
title) display.
F3: Gen
Displays or hides the general status display.
F4: Mon
Displays or hides the moitor status display.
Note:Refer to the illustrations in p. 63 for each OSD
item.
Digital Output
Note:This function is available only when Digital Output
setting has been established through the admin con-
sole. (Refer to the AdminConsole Users Guide.)
1. Display DigiOut menu. (Refer to Step 1 of p. 77 To
Recall Menu Functions.)
2. Select a Digital Output number by pressing the numer-
ic buttons.
3. Press the F1 (Set) or CAM(SET) button. A one-shot
pulse will be produced, and an assigned event will be
activated.
Note:Digital Output does not support the restore func-
tion.
GrpPre :         005
 Set
DigiOut:         007
 Set
Patrol :         004
Start Stop  OSD    :         006
 T&D  Cam  Gen  Mon 
						

							80
Alarm Status Table
The table shows the alarm statuses.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Display AlmStat menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F3 buttons.
Available buttons and functions
F1: On
Opens the ALARM STATUS table.
F2: Off
Closes the ALARM STATUS table.
F3: Blk
Changes the monitor background beween camera
images and black picture.
NAME:Alarm text
(Refer to p. 66 for other columns on the table.)
4. To display the next page, press the + button.
To display the previous page, press the – button.
Notes: 
•To display the first page of table, press the + but-
ton while holding down the SHIFT button.
•To display the last page of table, press the – button
while holding down the SHIFT button.
5. To exit the ALARM STATUS table, perform one of the
following.
•Select a camera. (Refer to p. 56 Camera Selection.)
•Press F2, then press the MON(ESC) button.
•Press F2, then press the EXIT button.
Video Loss Status Table
The table shows the video loss detection statuses.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Display VL Stat menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
3. Select a desired function by pressing one of the F1 to
F3 buttons. 
Available buttons and functions
F1: On
Opens the VIDEO LOSS STATUS table.
F2: Off
Closes the VIDEO LOSS STATUS table.
F3: Blk
Changes the monitor background beween camera
images and black picture.
CAM:Logical camera number
PORT#:Video input port number
NODE:Video switch node type
STATUS:
ABV/IN:Video level is above normal and in sync.
BLW/IN:Video level is below normal and in sync.
ABV/OUT:Video level is above normal and out of
sync.
BLW/OUT:Video level is below normal and out of
sync.
LOCATION:Logical cage number that the port
belongs to.
4. To display the next page, press the + button.
To display the previous page, press the – button.
Notes: 
•To display the first page of table, press the + but-
ton while holding down the SHIFT button.
•To display the last page of table, press the – button
while holding down the SHIFT button.
5. To exit the VIDEO LOSS table, perform either of the fol-
lowing.
•Select a camera. (Refer to p. 56 Camera Selection.)
•Press F2, then press the MON(ESC) button.
•Press F2, then press the EXIT button.
          ALARM STATUS       PG        
  ALM     STATE           NAME      
    1  DISARMED     FRONT DOOR
    1     ARMED     BACK DOOR
    1    ACTIVE              –
    1     ACKED              –
    1   CLEARED              –
    1     RESET              –
AlmStat:         008
  On  Off  Blk
VL Stat:         009
  On  Off  Blk
       VIDEO LOSS STATUS    PG        
  CAM PORT  NODE   STATUS   LOCATION
 6400  999    SX    ABV/IN 1234567890
 6400  999    SX   ABV/OUT 1234567890
 6400  999    SX    BLW/IN 1234567890
 6400  999    SX   BLW/OUT 1234567890