Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

							61
Camera Function 
(Shortcut Function)
The following function is available only when specified cam-
eras with the camera function feature are used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Enter the desired camera function number by pressing
the numeric buttons.
Note:When you select a wrong number, press the
CLEAR button to clear the numeric input.
3. Pres the CAM FUNC/SYS FUNC button.
CamF:nnn will appear on the LCD.
Note:Refer to Operating Instructions of camera for
details on available shortcuts.
Other Camera Functions
The following functions are available.
•Camera setup (p. 78)
•Auto mode (p. 78)
•BW mode (p. 78)
•Patrol learn (p. 79)
 MON 75         CAM
0123 Unit:01   00512
 MON CamF:075   CAM
0123 Unit:01   00512
Camera Function Control 
						

							62
Running Sequence
Tour Sequence
The following functions are available if a Tour Sequence has
been previously configured through the admin console. Any
Tour Sequence can be assigned to any monitors.
1. Select the desired monitor. (Refer to p. 56 Monitor
Selection.)
2. To select the desired Tour Sequence number, press
the numeric buttons.
Note: When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
3. Press the TOUR SEQ/GROUP SEQ button. The Tour
Sequence will run in forward direction on the active
monitor, and the Tour Sequence number with R
(Running) sign is displayed on the active monitor.
Note: The messages on the LCD indicate the following.
Annn:Area No.
Tnnnn:Tour Sequence No.
R:Running
4. To pause the sequence, press the SEQ PAUSE/SEQ
STOP button.
The P (Pausing) sign will be displayed beside the
Tour Sequence number area on the active monitor, and
P will appear beside the Tour Sequence number.
Notes:
•To switch to the next sequence step, press the +
button during sequence pause.
•To switch to the previous sequence step, press the
– button during sequence pause.
•To resume the sequence, press the TOUR
SEQ/GROUP SEQ again.
5. To return to spot monitoring, press the SEQ
PAUSE/SEQ STOP button while holding down the
SHIFT button.
Note: You can also return to spot monitoring by select-
ing a camera.
Group Sequence
The following function is available only if a Group Sequence
has been previously established through the 
admin console.
A Group Sequence determines the assignment of monitors
and cameras.
1. Press the numeric buttons to select a desired Group
Sequence number.
Note:When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
2. Press the TOUR SEQ/GROUP SEQ button while holding
down the SHIFT button. The Group Sequence will run in
forward direction on the assigned monitors, and the
Group Sequence number with R (Running) sign is dis-
played on each monitor.
Notes:
•The messages on the LCD indicate the following.
Annn:Area No.
Gnnnn:Group Sequence No.
R:Running
•When you select another monitor and starts a
group sequence, the Group Sequence number will
not be displayed on the LCD.
3. To pause the sequence, select one of the monitors that
are being run on the selected group sequence. Then
press the SEQ PAUSE/SEQ STOP button.
The P (Pausing) sign will be displayed beside the
Group Sequence number area on the active monitor.
Notes:
•To switch to the next sequence step, press the +
button during sequence pause.
•To switch to the previous sequence step, press the
– button during sequence pause.
4. To return to spot monitoring, select one of the monitors
that are being run on the selected group sequence.
Then, press the SEQ PAUSE/SEQ STOP button while
holding down the SHIFT button.
 MON 1          CAM
0123 Unit:01   00512
 MON A001T0001R CAM
0123 Unit:01   00512
 MON A001T0001P CAM
0123 Unit:01   00512
 MON 1          CAM
0123 Unit:01   00512
 MON A001G0001R CAM
0123 Unit:01   00512
 MON A001G0001P CAM
0123 Unit:01   00512 
						

							63
Note:You can also return to spot monitoring by select-
ing a camera.
Notes:
•Group sequences should contain group presets with
the same group of monitors.
•If two or more group sequences are assigned to the
same monitor, only one group sequence can run at a
time.
•Group sequences do not support the switchover and
restore functions.Call Group Preset
Refer to p. 78 Menu Function Details for how to operate.
Number of characters displayed on the monitor screen dif-
fers depending on systems.
•GX System (NTSC model only), System850:40 x 16
characters
•WJ-SX650 512 x 64 Full Matrix System:38 x 14 char-
acters
The following are examples of WJ-SX650 512 x 64 Full
Matrix System monitor display.
On-Screen Display Control
The procedure described below lets you determine the dis-
play, such as camera title, clock and status, on and off on
the active monitor screen.
Note:The following functions are not available when the
on-screen displays are compounded from the
Character Board that is installed on the Camera Input
Board. Confirm the setting in the admin consolefor
details.
1. Select the desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Press the OSD button. The OSD items (camera ID,
monitor status, and general status) will be hidden from
the monitor.Notes:
•Every time you press the OSD button, the OSD items
will be displayed or hidden. When the OSD items are
displayed, the LCD display will become as follows.
•You cannot display or hide the clock (time and date) by
pressing the OSD button. Refer to p. 79 OSD Control.
•To display or hide each OSD item individually, refer to
p. 79 OSD Control.
Alarm History Table
Refer to p. 66 Alarm History Table.
Alarm Status Table
Refer to p. 80 Alarm Status Table.
Video Loss Status Table
Refer to p. 80 Video Loss Status Table.
System Status Table
Refer to p. 81 System Status Table.
Video Loss History Table
Refer to p. 81 Video Loss History Table.
Monitor Display Control
 MON OSDAll Off CAM
0123 Unit:01   00512
07/07/1999  03:37:21 PM
M AREA1   ALM    T R  A
C CAMERA   TITLEClock
General status
Monitor status
Camera ID
 MON OSDAll On  CAM
0123 Unit:01   00512 
						

							64
Alarm Control
Alarm Selection
To control alarm behaviors, you need to select a desired
alarm number.
1. Select a desired alarm number by pressing the numer-
ic buttons. 
2. Press the ALARM/ALM SUSPEND button. 
The current status of selected alarm will be displayed
on the LCD.
Armed:The system is armed for alarm response.
Active:Alarm has been triggered and activated
assigned alarm response.
Ack:Alarm is acknowledged and an operator can con-
trol the alarm action.
Reset:Activated alarm is reset, but the alarm device is
still active.
Disarm:The system is disarmed for alarm response.
Clear:Auto arming is not set in the admin console.
3. To select the next alarm number, press the + button.
To select the previous alarm number, press the – but-
ton.
Alarm Arming Control
1. Select a desired alarm. (Refer to Alarm Selection.)
2. Every time you press the ALARM/ALM SUSPEND but-
ton, the selected alarm will be armed or disarmed.
When an alarm is disarmed, the LCD display will
become as follows.
3. To exit the alarm mode, press the CLEAR button. The
LCD display will become as follows.
 MON 1          CAM
0123 Unit:01   00512
 MON Alarm00001 CAM
0123  Armed    00512
 MON Alarm00001 CAM
0123  Disarm   00512
 MON Alarm Exit CAM
0123 Unit:01   00512
Example of Alarm Input and
Resulting Alarm Activation
The following is an example of an alarm input and the
resulting alarm activation.
Basic Setup
Note:Refer to the Admin ConsoleUsers Guide for details
on setup.
•Alarm Input #1 activates Gseq (Group Sequence) #1
as Alarm Action #0. The Group Sequence has priority
12.
•Monitor #1, #2, #3 and #4 are assigned to run the
sequence.
•The target monitor is Monitor #5. The images are dis-
played in the hold mode.
•Monitor #5 displays the images of Camera #5 in spot
mode.
Alarm Behaviors
1. Alarm #1 is activated.
2. Monitor #5 displays the alarm indication ALM, A1
(Alarm #1), and -0 (Action #0) to indicate that Alarm
#1 is activated. (Refer to the illustration.)
3. Gseq (Group Sequence) #1 runs on Monitor #1, #2, #3
and #4 with the lowest priority (Refer to the illustration.).
4. You will select Alarm #1.
5. You will press the ALARM/ALM SUSPEND button, and
then press the ALM RESET/ALM ALL RESET button.
Alarm #1 will be reset, and ALM will disappear from
Monitor #5. (However, GSeq #1 continues to run on the
monitors.)
6. To stop the sequence on the monitors, you will select
one of the monitors by pressing the MON (ESC) button.
Then, you will press the STOP button.
M1 G1 R
Group Sequence Monitors Target Monitor
M2 G1 R
M3 G1 RM4 G1 RM5 ALMA1-0 
						

							65
To arm or disarm all alarms
Every time you press the ALARM/ALM SUSPEND but-
ton while holding down the SHIFT button, all alarms will
be armed or disarmed.
Note:To arm or disarm an alarm, activate Allow Disarm for
the alarm. (Refer to the Admin ConsoleUsers Guide
for details.)
To Operate Alarm-related
Camera (ACK)
You can operate the camera associated with the alarm
action as follows:
1. Perform Step 1 and 2 of Alarm Selection.
2. Enter a desired alarm action number by pressing the
numeric buttons. 
Note:If you skip this step, Alarm Action #0 will be
specified.
3. Press the ACK button.
Ack:nn will appear on the LCD.
4. Control the cameras with the system controller.
(Refer to p. 58 Camera Site Accessories Control.)
Note:To select another alarm, press the ALARM/ALM
SUSPEND button. The ACK status will be canceled
(cancelled). Then, enter the alarm action number
by pressing the numeric buttons, and press the
ALARM/ALM SUSPEND button again.
 MON            CAM
0123 ALL Arm   00512
 MON            CAM
0123 ALLDisarm 00512
 MON 9          CAM
0123  Active   00512
 MON Alarm00001  CAM
0123 Ack:9     00512
To Cancel Alarms
1. Perform Step 1 to 2 of p. 64 Alarm Selection.
2. Press the ALM RESET/ALM ALL RESET button to reset
the alarm. Reset will be displayed on the LCD.
Notes:
•To reset all the alarms at a time, press the ALM
RESET/ALM ALL RESET button while holding down
the SHIFT button.
•After the alarm is deactivated, Armed or Cleared
will be displayed on the LCD.
 MON Alarm00001 CAM
0123  Reset    00512
 MON Alarm00001 CAM
0123 ALL Reset 00512
 MON Alarm00001 CAM
0123  Armed    00512
 MON Alarm00001 CAM
0123  Cleared  00512 
						

							66
Alarm History Table
There are 1000 alarm records stored in chronological order
in 125 pages of table.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Press the ALM RECALL button. AlarmHist will appear
on the LCD, and the ALARM HISTORY table will be dis-
played on the active monitor.
ALM:Logical alarm number
STATE:Indicates alarm state changes.
ARMED:The system is armed for alarm response.
ACTIVE:Alarm has been triggered and activated
assigned alarm response.
ACKED:Alarm is acknowledged and an operator
can control the alarm action.
RESET:Activated alarm is reset, but the alarm
device is still active.
DISARMED:The system is disarmed for alarm
response.
CLEARED:Auto arming is not set in the admin con-
sole.
DATE/TIME:Date and time when alarm state changes.
3. To display the next page, press the + button.
To display the previous page, press the – button.
Notes: 
•To display the first page of table, press the + but-
ton while holding down the SHIFT button.
•To display the last page of table, press the – button
while holding down the SHIFT button.
•Every time you press the button 0 while holding
down the MON (ESC) button, the monitor back-
ground will change beween camera images and
black picture.
4. To exit the ALARM HISTORY table, press the CLEAR
button while holding down the MON (ESC) button.
 MON AlarmHist  CAM
0123           00512
          ALARM HISTORY     PG        
  ALM     STATE        DATE/TIME      
    1  DISARMED     01/01/01 12:00
    1     ARMED     01/01/01 12:00
    1    ACTIVE     01/01/01 12:00
    1     ACKED     01/01/01 12:00
    1   CLEARED     01/01/01 12:00
    1     RESET     01/01/01 12:00 
						

							67
WJ-HD300A Series Control
Central Processing Unit WJ-MPU955A can control Digital
Disk Recorder WJ-HD300ASeries.
Recorder Selection
To control this recorder, you need to perform the operations
described in Recorder Selection.
You can select a recorder by performing either of the fol-
lowing.
•Recorder auto selection
•Recorder manual selection
Recorder Auto Selection
1. Select a camera whose picture you wish to play back.
(Refer to p. 56 Camera Selection.)
2. Press the PLAY/PAUSE button.
The recorder connected to selected camera will auto-
matically selected, and playback will start.
3. Control the recorder. (Refer to Controlling Digital Disk
Recorder WJ-HD300ASeries.)
Note:When you press the STOP button, the monitor
display is changed to the live images.
4. To resume normal camera selection, select a camera
while live images are being displayed on the monitor.
Recorder Manual Selection
1. Enter a desired recorder number by pressing the
numeric buttons.
2. Press the RECORDER/UNIT button.
3. Control the recorder. (Refer to Controlling Digital Disk
Recorder WJ-HD300ASeries.)
4. To resume normal camera selection, select a camera
while live images are being displayed on the monitor.
Displaying WJ-HD300ASeries
SETUP MENU
Refer to p. 78 Menu Function Details.
Controlling Digital Disk
Recorder WJ-HD300ASeries
The following are the operating procedures of WJ-HD300A
Series via system controller.
Note:Refer to the Operating Instructions of recorder for
details on each function.
Normal Playback
1.Select the recorder. (Refer to Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note:If you have performed Recorder Auto Selection,
skip this step.
3. Perform desired operations.
•To pause the playback, press the PLAY/PAUSE button.
•To stop the playback, press the STOP button.
•To resume the playback, press the PLAY/PAUSE but-
ton.
•To move forward/backward search during the play-
back, move the shuttle ring clockwise or counterclock-
wise.
Shuttle ring clockwise:Fast-forward playback
Shuttle ring counterclockwise:Rewind playback
Shuttle hold button:If you press this button while
rotating the shuttle ring, playback speed will be main-
tained even after removing a hand from the shuttle ring.
(The LED indicator on this button blinks during the fast
playback.)
•
To move forward/backward field advance during the
pause, move the JogDial clockwise or counterclockwise.
JogDial clockwise:Forward field advance
JogDial counterclockwise:Backward field advance
•To skip to the next/previous record during the play-
back, move the JogDial clockwise or counterclockwise.
JogDial clockwise:Skips to the next record.
JogDial counterclockwise:Skips to the previous
record.
 MON            DVR
0123 Unit:01  >00512
 MON            DVR
0123 Unit:01  >00512
 MON            CAM
0123 Unit:01  >00512 
						

							68
•To display the spot playback picture, press the numer-
ic button corresponding to the desired channel num-
ber, then press the ENTER button. Then, the active
camera number will appear on the LCD.
•To select the next channel number, press the + button.
•To select the previous channel number, press the –
button.
Multiscreen Segment Switching
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the MULTI SCREEN button. Every time you press
the button, the multiscreen segment patterns are
switched.
4 segments (1 - 4 CH) →4 segments (5 - 8 CH) →4
segments (9 - 12 CH) →4 segments (13 - 16 CH) →7
segments (1 - 7 CH) →9 segments (1 - 9 CH) →9 seg-
ments (10 -16 CH) →10 segments (1 - 10 CH) →13
segments (1 - 13 CH) →16 segments (1 - 16 CH)
3.To return to the spot display, press the numeric button
corresponding to the desired channel number. Then,
press the ENTER button, or press the CAM (SET) but-
ton while holding down the SHIFT button.
Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a
cameras optical zooming.
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note:If you have performed Recorder Auto Selection
in p. 67, skip this step.
3. Select the desired channel number by pressing the
numeric buttons.
4. Press the ENTER button.
The selected channel s picture is displayed in the spot
mode.
5. Each time the EL-ZOOM button are pressed, the zoom-
ing range are changeable as follows:
2x →4x →1x →2x …
Note:You can move the zoomed area on the monitor
by moving the 3D joystick.
A-B Repeat Playback
Refer to p. 76 A - B Repeat Playback.
Playing the Latest Recorded Image
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note:If you have performed Recorder Auto Selection
in p. 67, skip this step.
3. Press the GO TO LAST button during the playback. The
latest recorded image will be played back.
 MON            DVR
0123 Unit:01  >00512 
						

							69
Manual Recording
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the REC button. Recording will start.
3. To stop the recording, hold down the REC button for 2
seconds.
Note:Refer to the Operating Instructions of recorder
for details and other recording modes.
Marking
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note: If you have performed Recorder Auto Selection
in p. 
67, skip this step.
3. Press the MARK button during the playback. The play-
back start point will be marked.
Note: The marked playback images will be listed in the
marking list window. Refer to p. 
73Marking search
for how to play back.
Search Playback
You can search recorded images through the date and time.
Every time you press the SEARCH/T&D SEARCH button, the
monitor display will change as follows.
Live image →Date-and-time entry form →Recording event
list →VMD search list →Marking list →Date-and-time
entry form…
The following are the details on LCD display patterns and
function buttons.
LCD display while the event list is displayed on the monitor
LCD display while the thumbnail menu is displayed on
the monitorNote:While holding down the SHIFT button, the LCD dis-
play will become as follows.
Available buttons and functions (Common)
F1 button:Thumb or List
Changes the monitor display between the recording
event list window and thumbnail menu.
F3 button:Text
Displays text information of selected event on the
recording event list.
F4 button:Copy
Displays the DATA COPY window while the recording
event, VMD search, or making list window is displayed.
F1 button while holding down the SHIFT button:Nr-A
Specifies the normal or event recording area for the
playback media.
F2 button while holding down the SHIFT button:Cp-A
Specifies the copy area for the playback media.
F3 button while holding down the SHIFT button:Cpy1
Specifies the external recording device connected to
the COPY1 port of recorder.
F4 button while holding down the SHIFT button:Cpy2
Specifies the external recording device connected to
the COPY2 port of recorder.
Notes:
•The monitor display is not changed even if pressing the
F1 button while the date-and-time entry form is dis-
played.
•To close the monitor display activated by the function
buttons, press the MON (ESC) button.
•The DATA COPY window is not displayed while a
thumbnail window is displayed.
•Refer to the operating instructions of recorder for details
on each function.
Search Mode   /HD300
Thumb     Text Copy
F1 F2 F3 F4
Search Mode   /HD300
List      Text Copy
F1 F2 F3 F4
Search Mode   /HD300
Nr-A  Cp-A Cpy1 Cpy2
F1 F2 F3 F4 
						

							70
Available buttons and functions (Text information)

CAM (SET), MON (ESC), or EXIT button:Returns to
the upper menu.
Note:Text editing is not available.
Available buttons and functions (DATA COPY window)

JogDial clockwise:Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
CAM (SET) button:Executes the selection and starts
data copy. (If OK is selected) / Cancels the selec-
tion and returns to the upper menu. (If CANCEL is
selected)
MON (ESC) or EXIT button:Cancels the selection and
returns to the upper menu. 

3D joystick upward (D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick leftward (A):Moves the cursor to the left.
3D joystick rightward (B):Moves the cursor to the
right.
Date-and-time Search Playback
The recorded images can be searched for through the date
and time.
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Press the SEARCH/T&D SEARCH button repeatedly
until the date-and-time entry form appears on the moni-
tor.
The date-and-time entry form will appear on the center
(centre) of monitor.
3. Enter the desired date and time by performing either of
the following.
•Rotate the JogDial clockwise or counterclockwise.
•Press the + or – button.
The cursor can be adjusted by moving the 3D joystick
to the right or left.
4. Press the PLAY/PAUSE or CAM (SET) button. After the
search through the date and time, the recorded image
will be played.
5. To exit the entry form, press the MON (ESC) or EXIT
button. The live image will be displayed again on the
monitor. 
Recording event search
You will select a searching filter from TIME&DATE, CAM-
ERA, REC EVENT, and TEXT. Playback pictures will be
searched by the selected searching filter. 
1. Select the recorder. (Refer to p. 
67Recorder Selection.)
2. Repeat pressing the SEARCH/T&D SEARCH button
until the recording event list window is displayed on the
monitor. The recorder will enter the searching mode.
3. Select a desired searching filter by moving the joystick
rightward or leftward.
Note: The illustration is an example in which CAMERA
has been selected for the searching  filter.
4. To determine the filter setting, press the CAM (SET) but-
ton.
The searching filter window will be displayed on the
monitor.
Note:The searching filter window differs depending on
the searching filter selected in Step 2. Refer to p. 
71
Searching filter windows for details on each win-
dow.
5. Filter recording events. (Refer to p. 
71Searching filter
windows.)
6. To exit the searching filter window, press the MON
(ESC) button. The searching filter window will be
closed, and the recording event list window will be dis-
played again on the monitor.
Note:Refer to Step 3 for the screenshot.
TIME&DATE    SEARCH    REC EVENT     SEARCH    VMD    SEARCH    MARK
START
..::FEB
2
0412 00 00 AM
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chMANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL CAM REC EVTABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOPTEXT
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARK
TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER
TOTAL APR.25.03*12:34:56 AM  APR.25.03*12:34:56 AM100
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chMANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL CAM REC EVTABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOPTEXT
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARK
TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER
TOTAL APR.25.03*12:34:56 AM  APR.25.03*12:34:56 AM100
1
2345678
91011 12 13 14 15 16
CAMERA FILTERINGCAMERA
SET : [ SET ]      CANCEL : [ ESC ]