Panasonic Central Processing Unit Wj Mpu955a Operating Instructions

							51
ID
1Area
0Priority
3Boot File
–Model
WV-CU950IPA
172.18.0.200EA
00:80:45:0D:D0:01Port
0
ID CONTROLLERS
Note:Actual MAC address that is indicated on a product should be entered in the EA field.
1
2
3
4
5
6
7
8Area
0
0
0
0
0
0
0
0Local
1
2
3
4
5
6
7
8Switch
GX
GX
GX
GX
GX
GX
GX
GXPort
1
2
3
4
5
6
7
8
MONITORS
OPERATORS
Timeout
ID
100
955Password
100
955Priority
100
300:00:00
00:00:00Name
Normal
SuperClass
1: Normal
2: Super 
						

							52
DIGITAL RECORDERS
1
15
16 14 13 109 7
12 116
1
2
3
4
5
8 ID Logical
1Model
WJ-HD316AVideo
Switch Port
GX16IPA
172.18.0.60Unit
Address
1Digital
Bitrate
6.144
Channels
15
– 14 13 109 7
12 116
1
2
3
4
5
8 Cam 
						

							53
OPERATING PROCEDURES
(with WV-CU950) 
						

							54
LCD Display Descriptions
Default Status (LCD Display
After Login)
qMonitor number
The number of connected monitor is displayed.
wUnit number/Status
The number of connected site will be displayed.
eCamera number
The number of selected camera is displayed.
rInput number/Recorder number/Status
The numeric input, selected recorder number, or status
is displayed.
Blinking
In this document, grayed (greyed) areas on the LCD illus-
trations mean blinking.
Messages Displayed on the
LCD
The following are examples of LCD display after login.
Note:Some parts of LCD displays, described on this docu-
ment, may differ from the actual status.
Invalid
This message is displayed in the following circumstances.
•When you have entered a wrong user ID or password,
etc. 
•When you have entered a camera number or monitor
number, etc. that is not existing.
Busy
•When a selected monitor is controlled by a higher-level
user, ∗ blinks on the LCD. (You cannot control the
monitor.)
•When a selected camera is controlled by a higher-level
user, ∗ blinks on the LCD.  (You cannot control the
camera.)
•To cancel the Busy status, select another monitor, cam-
era, or wait until ∗ goes out.
Prohibit (Prohibited)
•When you have tried an operation not authorized by the
system unit, Prohibited is displayed on the LCD.
•When you have forgotten to select a monitor before
selecting a camera, Prohibited is displayed on the
LCD.
•After a few seconds, the LCD display will return to the
default status.
 MON Invalid    CAM
0001 Unit:01   00001
 MON Prohibit   CAM∗
0001 Unit:01   00001
Busy status is activated for a camera.
∗MON Prohibit   CAM
0001 Unit:01   00001
Busy status is activated for a monitor.
 MON Prohibit   CAM
0001 Unit:01   00001
∗MON Prohibit   CAM
0001 Unit:01   00001
Blinking
 MON            CAM
0032 Unit:01  >00512 
						

							55
Operation Start (Login)
1. Turn on the power switches of all system components.
2. Turn on the power of system controller. (Refer to the
Operating Instructions.)
The OPERATE indicator will light up, and the following
message will appear on the LCD.
Note:Wait unitl the following display appears on the LCD.
3. Enter the ID number by pressing the numeric buttons.
Then, press the CAM (SET) button. PWD will appear
on the LCD.
Note:When you have entered a wrong ID number,
press the CLEAR button.
4. Enter the password by pressing the numeric butons. 
5. Press the CAM (SET) button.
When the password is correct, OK will apear for 2
seconds on the LCD.
Note:When the password is wrong, NG will appear
for 2 seconds on the LCD. In this case, retry the
login procedure.
Login and Logout
Note:If you perform the login procedure after resetting the
CPU unit or turning on the power of CPU unit, the LCD
display may return to Step 2. In this case, wait for
approx. 5 minutes until the CPU unit has been started
up. Then, retry the login procedure.
Operation End (Logout)
You need to log out of the system:
•When leaving the controller
•When system access is no longer required
1. During the login status, press the MON LOCK/LOGOUT
button while holding down the SHIFT button.
2. You will log out of the system, and the LCD display will
return to the login standby display.
ID Display Function
You can check the following on the LCD. (Refer to p. 82 for
how to display.)
•Operator ID
•Controller ID
•System version
     ID:           
     Unit:01
     ID:12345      
     PWD:
     ID:12345      
     PWD:∗∗∗∗∗
 MON PWD:OK     CAM
     Unit:01
     ID:           
     Unit:01
     ID:12345      
     PWD:NG
Connecting to
        Main CPU ... 
						

							56
After the login procedure, the following operations are avail-
able to control the system.
The operation begins with monitor selection. Then, the
image of selected camera appears on the active monitor.
Monitor Selection
1. Select the desired monitor number by pressing the
numeric buttons. The entered number will appear on
the LCD.
2. Press the MON (ESC) button. 
When the selected monitor number is correct, < is dis-
played.
Note:To select the next or previous monitor number, press
the + or – button.
Camera Selection
1. Select the desired camera number by pressing the
numeric buttons. The entered number will appear on
the LCD.
2. Press the CAM (SET) button. 
When the selected camera number is correct, > is dis-
played.
Note:To select the next or previous camera number, press
the + or – button.
Monitor Selection and Camera Selection
Monitor Lock
Monitor lock is the function to retain other operators control
of a monitor even after that operator has selected another
monitor.
Note:This function will prevent operators with a lower prior-
ity from gaining control of a monitor. However, opera-
tors with a higher or the equal priority can gain the con-
trol of monitor.
1. Select a desired monitor. (Refer to Monitor Selection.)
2. Press the MON LOCK/LOGOUT button. The monitor
lock mode is activated, the monitor number with L
sign is displayed on the active monitor, and L will
appear beside MON on the LCD.
Note:Every time you press the MON LOCK/LOGOUT
button, the monitor lock mode will be activated or
deactivated.
 MON  123       CAM
      Unit:01
 MON            CAM
0123
						

							57
Adjustment of LCD Display and Buzzer
You can perform the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer.
(Refer to WV-CU950 Operating Instructions for how to adjust.)
Display Setting for Controller 
						

							58
Camera Site Accessories Control
Lens Control
Notes:
•Check that a specified lens, with motorized zoom/focus
functions, is mounted on the camera, and the lens
selection (DC/VIDEO) on the camera is set to DC. 
•Available functions differ depending on cameras. Refer
to the Operating Instructions of camera.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Press the FOCUS FAR or NEAR button while watching
the monitor. The lens focus is adjusted to obtain a
sharply focused image.
Note:Pressing the B button or top button of 3D joystick
unit can also set the lens focus automatically.
3. To adjust the lens zoom, move the zoom wheel con-
troller to the right (TELE) or left (WIDE).
4. Press the IRIS OPEN or CLOSE buttons to open/close
the lens iris. The lens iris is adjusted by these buttons
to obtain the proper image exposure.Note:To return the lens iris to the factory default status,
press the A button of 3D joystick unit.
Pan/Tilt Control
Manual Operation
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Move the 3D joystick to move the pan/tilt head towards
the desired direction.
Notes:
•If you move the 3D joystick widely, you can pan and tilt
the camera faster.
•Panning/tilting speed differs depending on cameras.
Auto Panning
Refer to p. 78 Auto Mode for how to operate.
 Program Preset Position
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. To move the camera to the position to be preset, move
the 3D joystick and press the lens control buttons.
3. To select the desired preset position number, press the
numeric buttons.
Notes:
•When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
•WJ-MPU955A supports up to 255 preset positions.
FA R
FOCUS
NEAR
B
Top button
WIDE
TELE
Zoom wheel controller
OPEN
IRIS
CLOSE
A
 MON 15         CAM
0123 Unit:01   00512 
						

							59
4. Press the PRESET/PGM PRESET button while holding
down the SHIFT button. The preset position will be
saved.
Note:If the entered position number has stored the previ-
ous preset position, it will be overwritten by the new
one.
Call Preset Position
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. To select the desired preset position number, press the
numeric buttons.
Notes:
•When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
•WJ-MPU955A supports up to 255 preset positions.
3. Press the PRESET/PGM PRESET button. The camera
will move to the preset position, and the image of
selected preset position will be displayed on the active
monitor.
Note:To call preset positions, you must set preset
position numbers for the camera in advance.
Wiper Control
The following procedure is available when a selected cam-
era (housing) is equipped with a wiper.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Keep pressing the WIPER button.
The wiper will be activated while this button is being
pressed.
Note:When the WIPER button is released, the LCD dis-
play will become as follows.
 MON PrgPre:15  CAM
0123 Unit:01   00512
 MON 15         CAM
0123 Unit:01   00512
 MON Preset:15  CAM
0123 Unit:01   00512
 MON Wiper On   CAM
0123 Unit:01   00512
 MON Wiper Off  CAM
0123 Unit:01   00512 
						

							60
Defroster Control
The following procedure is available when a selected cam-
era (housing) is equipped with a defroster.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Pressing the DEF ON/OFF button.
The defroster will be activated.
3. To deactivate the defroster, press the DEF ON/OFF
button while holding down the SHIFT button.
Note:The defroster will be automatically deactivated
when the temperature reaches the specified
degrees.
Auxiliary Control
You can control one or two auxiliary control devices. The
following procedure is available when an auxiliary control
device, such as Receiver WV-RC150, is connected to a
system unit.
Operating Procedure
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Press the AUX 1 ON/OFF or AUX 2 ON/OFF button.
The auxiliary control device, associated by the installa-
tion wiring, will be activated.
3. To quit the auxiliary control, press the AUX 1 ON/OFF
or AUX 2 ON/OFF button while holding down the SHIFT
button.
 MON Aux1 On    CAM
0123 Unit:01   00512
 MON Aux2 On    CAM
0123 Unit:01   00512
 MON Aux1 Off   CAM
0123 Unit:01   00512
 MON Aux2 Off   CAM
0123 Unit:01   00512
 MON Def Off    CAM
0123 Unit:01   00512
 MON Def On     CAM
0123 Unit:01   00512