OKI MC860cdtn User Manual

							
Configuring Your Machine > 41
Scanner 
Setup
Default 
SettingsDoc. Type Doc. Type:
Text, Text&Photo, 
Photo, Extra Fine Allows you to specify the type of 
images on the document.
Removal for 
Background & 
Show-Through 
(sTHR): 
Auto , OFF, 1(Low), 
2, 3, 4, 5(High), 
sTHR Allows you to block out the color 
background of the image 
(assuming document has a color 
background) - such that the 
background color is not printed.
Use Show-Through when copying 
documents that are printed on 
both sides (for example 
newspaper). Th
is function 
removes the reverse image and 
characters.
Density -3, -2, -1,  0, +1, +2, 
+3 Adjust density
Darker: Enhance image sharpness 
and color.
Lighter: Reduce hue and color.
Resolution 75dpi, 100dpi,  150dpi, 200dpi, 
300dpi, 400dpi, 
600dpi Allows you to select the 
appropriate resolution.
Remember the higher the 
resolution the bigge
r the file size!
Scan Size Auto, A3, B4, 
A4(LEF), A4, 
B5(LEF), B5, 
A5(LEF), A5, 
Letter(LEF), Letter, 
Tabloid, Legal 14, 
H.LTR Allows you to select the paper size 
to match the document size.
Cont. Scan OFF, ON Allows you to  continue scanning 
more documents. Allows you to 
construct a single scan job from 
multiple individual sheets or 
originals.
Direction Left Edge,  Top EdgeSpecify the orientation of the 
leading edge of  the document in 
the ADF or on the document glass.
Grayscale OFF, ON Select  ON to print in grayscale or 
black-and-white.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 42
Scanner 
Setup
(cont.)
Default 
Settings
(cont.)FileFormat Color:
PDF, TIFF, JPEG, XPS
Mono (Grayscale):
PDF , TIFF, JPEG, XPS
Mono (Binary):
PDF , TIFF Select the appropriate file format.
ComprsRt Color: High, Medium, Low
Mono (Grayscale):
High, Medium,  Low
Mono (Binary):
High (G4) , Medium 
(G3), Raw Select the appropriate 
compression level. Remember the 
higher the compression the bigger 
the file size!
EdgeErase OFF,  ON Adjust the width settings using the 
arrow buttons.
Input range: 05-50 mm
EraseCentr OFF,  ON Adjust the width settings using the 
arrow buttons.
Input range: 01-50 mm
Contrast -3, -2, -1,  0, +1, +2, 
+3 Adjust contrast setting.
High: Enhance brightness
Low: Reduce brightness
Hue [R] -3, -2, -1,  0, +1, 
+2, +3 [G] Adjust R/G balance settings.
[G]: Enhance green
[R]: Enhance red
Saturation [Low] -3, -2, -1,  0, 
+1, +2, +3 [High] Adjust saturation setting.
High: Enhance image sharpness
Low: Reduce hue
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 43
Scanner 
Setup
(cont.)
Default 
Settings
(cont.)RGB [R] -3, -2, 
-1, 0, +1, +2, +3
[G] -3, -2, 
-1,  0, +1, +2, +3
[B] -3, -2, 
-1,  0, +1, +2, +3 Adjust RGB contrast settings.
E-mail 
Setup File Name
User defined Use the on-screen keyboard to 
enter a file name.
Template Edit  Subject Enter standard e-mail subject text.  Max. 80 characters.
You can create up to 5 different e-
mail templates 
Edit Body Enter standard e-mail body text.  Max. 256 characters.
You can create up to 5 different e-
mail templates 
From/Reply To From Enter the e-mail sender address. Max. 80 characters.
Reply to Enter the e-mail reply address (for  error notification).
Check broadcast 
dest. OFF
, ON If enabled, an e-mail address 
confirmation screen displays 
before sending the e-mail.
USB 
Memory 
Setup File Name
User defined Use the on-screen keyboard to 
enter a file name.
Max. 64 characters.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 44
Print Setup Print Menu Tray 
ConfigurationPaper Feed:
Tray n
, MPTray Specifies a feed tray (where n 
identifies the tray).
Auto Tray Switch:
OFF,  ON Sets the automatic tray switch 
function.
Tray Sequence:
Down , Up, Paper 
Feed Tray Specifies selection order priority 
for automatic tray selection/
automatic tray switch.
MP Tray Usage:
When Mismatch,  Do 
Not Use When Mismatch: If a paper size or 
type in a tray is not matched to 
that of the print data, use paper 
from this tray instead of the 
specified tray.
Do Not Use: Makes the MP tray 
unavailable in auto
 tray selection/
switching.
Media Check:
Disable,  Enable Determines whether the machine 
checks the size of the media 
loaded matches that required for 
the document sent to print.
Print Setup Copies: 001 - 999 copies Enter the number of copies of a 
document to be printed from 1 to 
999.
Duplex:
OFF , ON Switches the duplex (2 sided) 
function OFF/ON.
Binding:
Long Edge , Short 
Edge Sets the default binding to LEF or 
SEF.
Only available when Duplex is ON.
Resolution:
600dpi, 
600x1200dpi , 
600dpi M-LEVEL Sets the default resolution for 
printing (dots per inch). 
600x1200dpi uses more memory 
and requires more time to process, 
but prints at a higher quality.
Toner Save Mode:
OFF , ON Reduces the amount of toner used 
for imaging. Toner saving gives 
lighter prints but is more 
economical.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 45
Print Setup 
(cont.)
Print Menu 
(cont.)Print Setup 
(cont.) Mono-Print Speed:
Auto Speed
, Mono 
34PPM, Mixed Speed, 
Color Speed Auto Speed
: If the first page of a 
print job is blac k and white, the 
machine runs at 34ppm (pages per 
minute). When a color page is 
detected the machine slows down 
to 26ppm for the rest of the job.
Mono 34PPM : This setting 
operates in the same way as auto 
speed, except that the machine 
runs at 34ppm until a color page is 
detected. To achieve this speed 
the machine requires an additional 
10-20 seconds to warm up and 30-
60 seconds to cool down when 
switching to 26ppm for color 
pages. This sett ing is therefore 
most appropriate when the 
majority of print jobs are entirely 
black and white.
Mixed Speed : The machine 
automatically switches between 
26ppm for each color page and 
34ppm for each black and white 
page. When black and white pages 
are printed, the 3 color drums are 
automatically lifted to maximize 
their working life. This operation 
imposes a delay each time the 
machine switches between color 
and black and white printing. 
However, the 30-60 second cool 
down delay described for Mono 
34ppm is avoided by limiting the 
mono speed to 26ppm. This 
setting may be preferred for 
mostly black and white printing 
with some color pages, or where 
most print jobs are entirely color 
or entirely black and white.
Color Speed : The machine runs 
at 26ppm for all print jobs. This 
setting is most appropriate when 
the majority of print jobs are in 
color.
Orientation:
Portrait , Landscape Selects default pa
ge orientation 
between portrait (tall) and 
landscape (wide). - (PCL, IBMPPR 
& EPSON FX only)
Lines per Page:
005~ 064~128 Row Sets the number of lines of text 
per page when raw text is received 
from systems other than Windows. 
The default for A4 
portrait is 65, 
and for Letter is 60. - (PCL only)
Edit Size:
Cassette Size , A3, 
A4, A4LEF, A5, A6, 
B4, B5, B5LEF, Legal 
14, Legal 13.5, Legal 
13, Letter, LetterLEF, 
Executive, Custom, 
COM-10, DL, C5, C4 Sets the size of 
the printable page 
area to match the size of the paper 
in use. This is not the same as the 
physical paper size, which is 
always slightly larger. For 
dimensions of phys ical page sizes, 
refer to “Paper Recommendations” 
on page 20.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 46
Print Setup 
(cont.)
Print Menu 
(cont.)Print Setup 
(cont.) Width:
2.5~
8.5~11.7 inches Selects the widt
h of the paper 
defined by the “C ustom” settings. 
Length:
4.1~ 11~48 inches Selects the length of the paper 
defined by the “C
ustom” settings. 
Note that media of up to 1200 mm 
in length can be fed from the multi 
purpose tray for banner printing.
Printer Adjust Manual Timeout: Disable, 30 seconds, 
60 seconds Specifies how many seconds the 
machine will wait for paper to be 
fed before cancelling the job.
Wait Timeout:
Disable, 5, 10, 20, 
30,  40 seconds , 50, 
60, 90, 120, 150, 
180, 210, 240, 270, 
300 seconds Specifies how many seconds the 
machine will wait when received 
data pauses before forcing a page 
eject. In PostScript Emulation 
mode the job will be cancelled if 
timeout occurs.
Low Toner:
Stop,  Continue Specifies whether the machine 
should continue pr
inting even after 
a low toner condition is detected.
Jam Recovery:
Disable,  Enable Specifies whether the machine 
should perform jam recovery after 
a paper jam occurred. If enabled, 
the printer will attempt to re-print 
any pages lost due to a paper jam 
once the jam has been cleared.
Paper Black Setting:
-2, -1,  0, +1, +2 Used for micro adjustment when 
very visible faded print results or 
light specks (or streaks) result 
when printing in Plain Paper/Black 
setting.
Decrease the value if light specks 
(or streaks) or snow flake like 
printing results in high density 
print areas.
Paper Color Setting:
-2, -1,  0, +1, +2 Used for micro adjustment when 
very visible faded print results or 
light specks (or streaks) result 
when printing in Plain Paper/Color 
setting.
Decrease the value if light specks 
(or streaks) or snow flake like 
printing results in high density 
print areas.
Trnspr Black Setting:
-2, -1,  0, +1, +2 As for Paper Black Setting above.
Trnspr Color Setting:
-2, -1,  0, +1, +2 As for Paper Color Setting above.
SMR Setting:
-3, -2, -1,  0, +1, +2, 
+3 To correct variations in print 
results caused by temperature/
humidity conditions and difference 
in print density/frequency.
Change the sett
ing when print 
quality is uneven.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 47
Print Setup 
(cont.)
Print Menu 
(cont.)Printer Adjust 
(cont.) BG Setting:
-3, -2, -1, 
0, +1, +2, 
+3 To correct variations in print 
results caused by temperature/
humidity conditions and difference 
in print density/frequency.
Change the setting when 
background is dark.
Print Position 
Adjust Front X Adjust: 
-2.00~
0~+2.00  mm
Front Y Adjust: 
-2.00~ 0~+2.00  mm
Back X Adjust: 
-2.00~ 0~+2.00  mm
Back Y Adjust: 
-2.00~ 0~+2.00  mm X adjust: Adjusts the position of 
the whole printing image 
perpendicular to the direction of 
paper movement (i.e. 
horizontally).
Y adjust: Adjusts the position of 
the whole printing image parallel 
to the direction of paper 
movement (i.e. vertically).
Drum Cleaning OFF, ON Set to produce idling of a drum 
before printing in order to reduce 
horizontal white lines. This 
shortens image drum life.
Hex Dump OFF, ON Prints out the data received from 
the host PC in hexidecimal code.
Color Menu Density Control Manual,  AutoIf set to Auto, image density will 
be automatically adjusted at 
power on, when a new image 
drum or toner cartridge is 
installed, and at intervals of 100, 
300 and 500 drum counts. If a 500 
drum count interval occurs during 
a print job it will occur at the end 
of that job, and will take up to 55 
seconds. If set to manual, this 
adjustment will only be performed 
when initiated by the next menu 
item.
Adjust Density Execute Press Yes to execute or  No to 
cancel.
Selecting this will perform the auto 
density set up  immediately.
Color Tuning/
Print Pattern Execute
Press Yes to execute or  No to 
cancel.
Selecting this item prints the color 
tuning pattern to help you adjust 
the color balance.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 48
Print Setup 
(cont.)
Color Menu 
(cont.)Cyan 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3 Adjusts image density for each 
color component (cyan, magenta, 
yellow and black)
. Normal setting 
is 0.
Cyan MID-TONE -3, -2, -1, 
0, +1, +2, 
+3
Cyan DARK -3, -2, -1,  0, +1, +2, 
+3
Magenta 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3
Magenta MID-
TONE -3, -2, -1, 
0, +1, +2, 
+3
Magenta DARK -3, -2, -1,  0, +1, +2, 
+3
Yellow 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3
Yellow MID-
TONE -3, -2, -1, 
0, +1, +2, 
+3
Yellow DARK -3, -2, -1,  0, +1, +2, 
+3
Black 
HIGHLIGHT -3, -2, -1, 
0, +1, +2, 
+3
Black MID-TONE -3, -2, -1,  0, +1, +2, 
+3
Black DARK -3, -2, -1,  0, +1, +2, 
+3
Cyan Darkness -3, -2, -1,  0, +1, +2, 
+3 Adjusts darkness of each color 
(cyan, magenta, yellow and 
black). Normal setting is 0.
Magenta 
Darkness -3, -2, -1, 
0, +1, +2, 
+3
Yellow Darkness -3, -2, -1,  0, +1, +2, 
+3
Black Darkness -3, -2, -1,  0, +1, +2, 
+3
Adjust 
Registration Execute
Press Yes to execute or  No to 
cancel.
Performs automatic color 
registration adju stment. Normally 
this is done on power on and when 
the top cover is opened and then 
closed. This process accurately 
aligns the cyan, magenta and 
yellow images to the black image.
CYAN Reg Fine 
Adj -3, -2, -1, 
0, +1, +2, 
+3 Performs fine adju
stment of image 
timing in relation to the black 
image component.
MAGENTA Reg 
Fine Adj -3, -2, -1, 
0, +1, +2, 
+3
YELLOW Reg 
Fine Adj -3, -2, -1, 
0, +1, +2, 
+3
Ink Simulation OFF, SWOP, 
EUROSCALE, JAPAN Selects from a range of industry 
standard color swatches.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 49
Print Setup 
(cont.)
Color Menu 
(cont.)UCR
Low, Medium, High Selects the limitation of the toner 
layer thickness.
If paper curl occurs in dark 
printing, selecting Medium or Low 
sometimes helps reduce curl.
CMY100% 
Density Disable
, Enable When enabled, black areas are 
produced using 100% C, M, and Y 
instead of black. This results in a 
glossier finish.
CMYK 
Conversion OFF, 
ON Setting to OFF will simplify the 
conversion process of CMYK data, 
which will reduce  process time.
This setting is ignored when Ink 
Simulation function is used.
Sys Config 
Menu Personality
Auto Emulation, 
PCL, IBM PPR, EPSON 
FX, PS3 Emulation This item selects which industry 
standard emulation your unit 
should use. When set to Auto, 
incoming data is examined and the 
correct emulation is automatically 
selected each time a print job is 
received.
Alarm release Manual, Auto When Manual, non-critical 
warnings, such as  requests for a 
different paper size, can be 
cleared by pressing the RESET 
button. When set to Auto, they are 
cleared when the print job 
resumes.
Auto Continue OFF, ON Determines whether or not the 
unit will automatically recover 
from a memory overflow 
condition.
Error Report OFF, ON If  ON, the unit will print error 
details when a PostScript 
emulation error occurs.
PCL Setup Font Source ResidentSpecifies the location of the PCL 
default font. Normally this will be 
internal unless additional fonts are 
installed in the expansion POM slot 
or additional fonts have been 
downloaded to RAM as permanent 
fonts.
Font No. 1|00~90 Sets the PCL font number.
Font Pitch 0.44~ 10.00~99.99 
CPI Sets the width of the PCL default 
font.
Font Height 4.00~ 12.00~999.75 
Point Sets the height of the PCL default 
font.
Symbol Set PC-8 PCL symbol set. If the font source 
and number are changed to one 
which does not support the 
selected symbol set, this must be 
changed to an available symbol 
set for that font.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 50
Print Setup 
(cont.)
PCL Setup 
(cont.)A4 Print Width
78 Column, 80 
Column Sets the number of columns 
subject to Auto LF with A4 paper in 
PCL. This is the value when Auto 
CR/LF Mode is set to OFF with the 
10CPI character.
White Page Skip OFF, ON Selects whether blank pages are 
printed or not.
CR Function CR, CR+LF Selects whether a received 
carriage return character (0Dh) 
also causes a line feed.
LF Function LF, LF+CR Selects whether a received line 
feed character (0Ah) also causes a 
carriage return.
Print Margin Normal, 1/5 Inch, 
1/6 Inch Sets the non-prin
table page area. 
Normal is PCL compatible.
True Black OFF, ON Selects whether black image data 
is printed using black toner (True 
Black ON) or 100% CMY. (Valid in 
PCL emulation mode only.)
Pen Width 
Adjust OFF, 
ON The thinnest line width in PCL, a 1-
dot line, may look broken.
ON: when the thinne st line width 
is specified, line width is 
emphasized to look wider.
OFF:  the line appears as specified.
Tray ID# Tray 2: 01~05~59
Tray 3:
01~ 20~59
MP Tray:
01~ 04~59 Sets the number to specify Tray 2, 
Tray 3, and MP Tray for the paper 
feed destination command in 
PCL5e emulation.
IBM PPR 
Setup Character Pitch
10 CPI, 12 CPI, 17 
CPI, 20 CPI, 
PROPORTIONAL Specifies character pitch in IBM 
PPR emulation.
Font Condense 12CPI - 20CPI, 
12CPI - 12CPI Specifies 12CPI pitch for Condense 
Mode.
Character Set SET-1,  SET-2Specifies a character set.
Symbol Set IBM 437 Specifies a symbol set.
Letter 0 Style Disable, Enable Specifies the style that replaces 
9BH with letter o and 9DH with a 
zero
Zero Character Normal, Slashed Sets the zero to be slashed or 
unslashed.
Line Pitch 6 LPI, 8 LPI Specifies the line spacing.
White Page Skip OFF
, ON Selects whether blank pages are 
printed or not.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals