OKI C130n User Manual

91 - C130n User’s Guide
Important!
Be careful not to touch the paper exit sensor and the surface of 
the fuser roller in the fuser unit. 
  
1While lifting the fuser unit with 
the blue handles (one on each 
side), vertically insert the fuser 
unit.
 
 
 
 
 
 
 
 
 
 
 
 
Downloaded From ManualsPrinter.com Manuals 

92 - C130n User’s Guide
Important!
Do not touch the paper exit 
sensor on the fuser unit. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Important!
Do not touch the matching 
connectors of the fuser unit 
and the machine.
 
 
 
 
 
 
 
 
 
 
M
Downloaded From ManualsPrinter.com Manuals 

93 - C130n User’s Guide
2After the fuser unit is firmly 
installed, flip the blue handles 
down toward you.
3Carefully close the top cover.
4Reconnect the power cord, and 
turn on the printer.
Downloaded From ManualsPrinter.com Manuals 

94 - C130n User’s Guide
Maintaining the 
Printer
Downloaded From ManualsPrinter.com Manuals 

95 - C130n User’s Guide
Maintaining the Printer
CAUTION
Read all caution and warning labels carefully, making sure to 
follow any instructions contained in them. These labels are 
located on the inside of the printer’s covers and the interior of 
the printer body.
Handle the printer with care to preserve its life. If dust and paper scraps 
remain on the inside or outside of the printer, printer performance and print 
quality will suffer, so the printer should be cleaned periodically. Keep the 
following...

96 - C130n User’s Guide
Always test any cleaning solution (such as mild detergent) on a small 
inconspicuous area of your printer to check the solution’s performance.
Never use sharp or rough implements, such as wire or plastic cleaning 
pads.
Always close the printer’s covers gently. Never subject the printer to 
vibration.
Do not cover the printer immediately after using it. Turn it off and wait until 
it cools down.
Do not leave the printer’s covers open for any length of time, especially in 
well-lit...

97 - C130n User’s Guide
When lifting the printer, grasp the areas shown in the figure. 
Before moving the printer, remove the dust cover, and fold up Tray 1.
If the optional lower feeder unit, attachment and duplex option are 
installed, remove them and move them separately.
If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool 
water and consult a doctor.
Make sure any parts removed during cleaning are...

98 - C130n User’s Guide
Cleaning the Printer
CAUTION
Be sure to turn off the printer and unplug the power cord before 
cleaning. However, be sure to turn on the printer when cleaning 
the print head window.
Cleaning the Exterior 
Control Panel 
Ventilation Grill 
YMCK
READYEADY
RO TAT EOTATETONERONER
ATTENTIONTTENTION
CANCELANCEL
Downloaded From ManualsPrinter.com Manuals 

99 - C130n User’s Guide
Exterior Housing 
Cleaning the Interior
Cleaning the Media Feed Roller
1Open the top cover.
NoteIf there is paper in the 
output tray, remove it, 
and then fold up the 
output tray before 
opening the top cover.
Downloaded From ManualsPrinter.com Manuals 

100 - C130n User’s Guide
2Grab the handle and lift it up 
slightly to the back, and then 
slowly pull the imaging cartridge 
out vertically.
 
 
 
 
 
 
 
 
 
Downloaded From ManualsPrinter.com Manuals