OKI C130n User Manual

131 - C130n User’s Guide
Important!
Do not touch the paper exit 
sensor on the fuser unit. 
 
 
 
 
 
 
 
 
 
 
 
Important!
Decreased print quality may 
result if the surface of the 
transfer roller is touched.
 
Be careful not to touch the 
surface of the transfer roller.
 
 
 
 
 
 
 
 
M
Downloaded From ManualsPrinter.com Manuals 

132 - C130n User’s Guide
5Return the fuser separator 
levers to their original positions.
6Slowly insert the imaging 
cartridge vertically, and then 
push it slightly down toward you 
to finish reinstalling the imaging 
cartridge.
M
Downloaded From ManualsPrinter.com Manuals 

133 - C130n User’s Guide
7Carefully close the top cover. 
 
 
 
 
 
 
 
 
 
 
 
 
Clearing a Media Misfeed From Tray 1
1Remove the dust cover from 
Tray
 1.
2Carefully pull out the misfed 
media.
NoteIf the media cannot be 
removed, instead of 
pulling it with extreme 
force, clear the media 
misfeed according to the 
procedure described in 
“Clearing a Media 
Misfeed in the Printer” on 
page 127.
Downloaded From ManualsPrinter.com Manuals 

134 - C130n User’s Guide
3Reattach the dust cover. 
 
 
 
 
 
 
 
 
 
 
 
 
4Press the Menu Select key.
Downloaded From ManualsPrinter.com Manuals 

135 - C130n User’s Guide
Clearing a Media Misfeed From Tray 2
1Pull out Tray 2 as far as possi-
ble.
2Lift up Tray 2 to remove it.
3Remove any misfed paper.
NoteIf necessary, remove the 
dust cover from Tray
 1 
and close the tray.
Downloaded From ManualsPrinter.com Manuals 

136 - C130n User’s Guide
4Remove the lid from Tray 2, and 
then remove all paper from the 
tray.
5Fan the paper, and align its 
edges.
6Press down the media pressure 
plate to lock it into place.
7Load the media in Tray 2, and 
attach the lid.
Downloaded From ManualsPrinter.com Manuals 

137 - C130n User’s Guide
8Reinsert Tray 2.
9Open and close the top cover to 
clear the misfeed message.
Downloaded From ManualsPrinter.com Manuals 

138 - C130n User’s Guide
Clearing a Media Misfeed from the Duplex Option
1Open the duplex cover.
2Carefully pull out the misfed 
media.
NoteAlways remove the 
misfed media in the feed 
direction as shown only.
NoteIf the media misfeed 
occurs at the bottom feed 
slot and the media does 
not stick out enough to be 
removed, turn the dial at 
the right in the direction 
of the arrow until the 
media can be pulled out.
Downloaded From ManualsPrinter.com Manuals 

139 - C130n User’s Guide
3Close the duplex cover.
Downloaded From ManualsPrinter.com Manuals 

140 - C130n User’s Guide
Solving Problems with Media Misfeeds
NoteFrequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media.
SymptomCauseSolution
Several sheets go 
through the printer 
together.The front edges of 
the media are not 
even.Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.Remove the moist media and replace it 
with new, dry media.
Media...