OKI C130n User Manual

141 - C130n User’s Guide
Media is  
misfeeding.
The media is not 
correctly positioned in 
the tray.Remove the misfed media and 
reposition the media properly in the 
tray.
The number of sheets 
in the tray exceeds 
the maximum 
allowed.Remove the excess media and reload 
the correct number of sheets in the 
tray. 
The media guides are 
not correctly adjusted 
to the media size.Adjust the media guides in the Tray 1 
to match the size of the media.
Warped or wrinkled 
media is loaded in the 
tray.Remove...

142 - C130n User’s Guide
Solving Other Problems
SymptomCauseSolution
Printer 
power is not 
on.The power cord is not 
correctly plugged into the 
outlet.Turn off the printer, confirm that the 
power cord is correctly plugged into the 
outlet, and then turn on the printer.
Something is wrong with the 
outlet connected to the 
printer.Plug another electrical appliance into 
the outlet and see whether it operates 
properly.
The power switch is not 
correctly turned on (I 
position).Turn the power switch off...

143 - C130n User’s Guide
Printing 
takes too 
much time.The printer is set to a slow 
printing mode (for example, 
thick stock).It takes more time to print with special 
media. When using regular paper, 
make sure that the media type is set 
properly in the driver.
The printer is set to power 
saving mode.It takes time for printing to start in 
power saving mode.
The job is very complex.Wait. No action needed.
A toner cartridge for a 
different region is installed 
(
X INCORRECT is 
displayed in the...

144 - C130n User’s Guide
You are 
experiencing 
duplex 
problems.Media or settings are not 
correct.For autoduplexing, make sure that you 
have a duplex option installed.
Make sure that you are using correct 
media. 
Only Letter/A4 plain paper can be 
autoduplexed.
Do not duplex labels, postcards, 
thick stock, letterheads, or plain 
paper with a size other than Letter/
A4.
Make sure that you have not mixed 
media types in Tray
 1.
Make sure the duplex option is installed 
and declared in the Windows...

145 - C130n User’s Guide
The date and 
time is not 
correctly 
maintained 
on the 
printer.The backup battery has 
reached the end of its 
service life.Contact Technical Support.
Symptom Cause Solution
Downloaded From ManualsPrinter.com Manuals 

146 - C130n User’s Guide
Solving Problems with Printing Quality
SymptomCauseSolution
Nothing is printed, 
or there are blank 
spots on the 
printed page.One or more of the 
toner cartridges may 
be defective.Remove the toner cartridges and 
check if any is damaged. 
The imaging cartridge 
may be defective.Remove the imaging cartridge and 
check for damage. If it is damaged, 
replace it.
The media is moist 
from humidity.Adjust the humidity for media storage. 
Remove the moist media and replace it 
with...

147 - C130n User’s Guide
Image is too light; 
there is low image 
density.The print head window 
is dirty.Clean the print head window.
The media is moist 
from humidity.Remove the moist media and replace 
with new, dry media.
There is not much 
toner left in the 
cartridge.Replace the toner cartridge.
One or more of the 
toner cartridges may 
be defective.Remove the toner cartridges and 
check each for damage. If one or more 
is damaged, replace it.
Media type is set 
incorrectly.When printing labels,...

148 - C130n User’s Guide
The print or color 
density is uneven.One or more of the 
toner cartridges may 
be defective or low.Remove the toner cartridges and 
check for damage. If it is damaged, 
replace it.
The imaging cartridge 
is defective.Remove the imaging cartridge and 
check for damage. If it is damaged, 
replace it.
The printer is not level.Place the printer on a flat, hard, level 
surface.
Irregular print or 
mottled image 
appears.The media is moist 
from humidity.Adjust the humidity in the...

149 - C130n User’s Guide
There are toner 
smudges or 
residual images.One or more of the 
toner cartridges are 
defective or installed 
incorrectly.Remove the toner cartridges and 
check each for damage. If one or more 
is damaged, replace it.
There are toner 
smudges on the 
back side of the 
page (whether or 
not it has been 
duplexed).The media path is dirty 
with toner.Print several blank sheets and the 
excess toner should disappear.
One or more of the 
toner cartridges are 
defective.Remove the...

150 - C130n User’s Guide
Image defects.The print head window 
is dirty.Clean the print head window.
A toner cartridge may 
be leaking.Remove the toner cartridges and 
check for damage. If it is damaged, 
replace it.
A toner cartridge may 
be defective.Remove the toner cartridge with the 
color causing the abnormal image.
 
Replace it with a new toner cartridge.
The imaging cartridge 
may be defective.Remove the imaging cartridge and 
check for damage. If it is damaged, 
replace it.
Lateral lines or...