OKI C130n User Manual

51 - C130n User’s Guide
LANGUAGE MENU
ENGLISH, FRENCH, 
GERMAN, SPANISH, ITALIAN, 
PORTUGUESE, DUTCH, 
CZECH, JAPANESE, POLISHThe display language of the message window can 
be changed to the required language.
The default setting is English.
The language selections appear in the message 
window in the corresponding language. For 
example, 
GERMAN appears as DEUTSCH.
Downloaded From ManualsPrinter.com Manuals 

52 - C130n User’s Guide
Media Handling
Downloaded From ManualsPrinter.com Manuals 

53 - C130n User’s Guide
Print Media
Specifications 
NoteFor custom sizes, use the printer driver to specify the settings within 
the ranges shown in the above table.
MediaMedia SizeTray*Duplex
 Inch Millimeter
Letter8.5 x 11.0215.9 x 279.41/2Yes
Legal8.5 x 14.0215.9 x 355.61No
Statement5.5 x 8.5140.0 x 216.01No
Executive7.25 x 10.5184.0 x 267.01No
A48.2 x 11.7210.0 x 297.01/2Yes
A55.9 x 8.3148.0 x 210.01No
B5 (JIS)7.2 x 10.1182.0 x 257.01No
B5 (ISO)6.9 x 9.8176.0 x 250.01No
Folio8.3 x 13.0210.0 x...

54 - C130n User’s Guide
Media Types
Before purchasing a large quantity of special media, do a trial print with the 
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to  
load it.
Plain Paper
Use plain paper that is
Suitable for plain paper laser printers, such as standard or recycled office 
paper.
Important!
Do not use the media types listed below. These could cause poor 
print quality, media misfeeds, or damage to the printer.
DO NOT...

55 - C130n User’s Guide
Dusty
Wet (or damp)
NoteKeep media between 15% and 85% relative humidity. Toner does 
not adhere well to moist or wet paper.
Layered 
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn 
Too slick, too coarse, or too textured 
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing...

56 - C130n User’s Guide
Labels
CAUTION
Labels may stick to the fuser, causing them to peel off and media 
misfeeds to occur.
A sheet of labels consists of a face sheet (the printing surface), adhesive, and 
a carrier sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no 
adhesive should come through on the surface.
You can print continuously with label sheets. However, this could affect the 
media feed, depending on the media...

57 - C130n User’s Guide
DO NOT use label sheets that 
Have labels that easily peel off or have parts of the label already removed
Have backing sheets that have peeled away or have exposed adhesive
Are precut or perforated
Letterhead Stationery 
Try printing your data on a sheet of plain paper first to check placement. 
Postcards
Try printing your data on a sheet of plain paper first to check placement. 
Use postcards that are
Approved for laser printers
DO NOT use postcards that are
CapacityTray 1Up to...

58 - C130n User’s Guide
Coated
Designed for inkjet printers
Precut or perforated
Preprinted or multicolored
NoteIf the postcard is warped, press on the warped area before putting 
it in Tray 1. 
Folded or wrinkled 
Downloaded From ManualsPrinter.com Manuals 

59 - C130n User’s Guide
Printable Area
The printable area on all media sizes is up to 4.2 mm (0.165) from the edges 
of the media. 
Each media size has a specific printable area (the maximum area on which 
the machine can print clearly and without distortion). 
This area is subject to both hardware limits (the physical media size and the 
margins required by the machine) and software constraints (the amount of 
memory available for the full-page frame buffer). The printable area for all 
media sizes is...

60 - C130n User’s Guide
Loading Media 
1OPen the ream of paper and take off the top and bottom sheets. 
2Holding a stack of approximately 200 sheets at a time, fan the stack to 
prevent static buildup before inserting it in a tray.
Important!
Although this printer was designed for printing on a wide range of 
media types, it is not intended to print exclusively on a single 
media type except plain paper. 
 
 
Continuous printing on media other than plain paper (such as 
labels, or thick stock) may...