OKI C130n User Manual

31 - C130n User’s Guide
No.IndicatorFunction
3 
 Moves up in the menu structure
Within a menu choice that is changeable char-
acter by character, scrolls upward through the 
available characters
4 
 Moves right in the menu structure
Moves right through the available menu choices
5 
 Moves down in the menu structure.
Within a menu choice that is changeable char-
acter by character, scrolls downward through 
the available characters
6 
 Moves left in the menu structure
Moves left through the available menu...

32 - C130n User’s Guide
Toner Supply Indicators
The indicators show the amount of toner that remains in the yellow (Y), 
magenta (M), cyan (C), and black (K) toner cartridges.
Configuration Menu Overview
Configuration Menu Tree
IDLE
> MAIN MENU
- PRINT MENU (see page 34)
- PAPER MENU (see ) 
- QUALITY MENU (see page 38)
- INTERFAACE MENU (see page 41)
- SYSTEM DEFAULT (page 46)
- SERVICE MENU (see page 50)
> LANGUAGE (see page 51)
NoteIf  
MAIN MENU 
 /SYSTEM DEFAULT 
  /SECURITY 
   /CONFIG 
    /ENABLE...

33 - C130n User’s Guide
Print Menu Tree
MENU MAP
CONFIGURATION
S TAT I S T I C S  PA G E
FONT LIST
> POSTSCRIPT
> PCL
DIRECTORY LIST
NoteThe amounts remaining for the supplies status and coverage 
information displayed using the statistics page may be different from 
the actual amounts and should be used only as reference.
Print Menu
NoteAll factory default values are shown in bold.
MENU MAPSettingsYES/NO
Prints the menu map.
CONFIGURATION SettingsYES/NO
Prints the configuration page.
S TAT I S T I C S...

34 - C130n User’s Guide
PAPER MENU
With this menu, the media used for printing can be managed.
Paper Menu Tree
INPUT TRAY
> TRAY 1 MODE
> TRAY 1
- MEDIA SIZE
- MEDIA TYPE
> TRAY 2 
- MEDIA SIZE
> CUSTOM SIZE
- WIDTH
- LEMGTH
> AUTO CONTINUE
> TRAY CHAINING
> MAP
- MODE
- LOGICAL TRAY 0
- LOGICAL TRAY 2
thru
- LOGICAL TRAY 9
DUPLEX
ORIENTATION
PAGE RECOVERY
Note* This menu item appears only if the duplex option is installed. 
** These menu items appear only if an optional second tray is 
installed....

35 - C130n User’s Guide
Paper Menu
NoteAll factory default values are shown in bold.
INPUT 
TRAYTRAY 1 
MODESettingsAUTO, CASSETTE
When printing from Tray 1, select whether the paper size 
and paper type set from the printer driver or the MEDIA 
SIZE and MEDIA TYPE settings set by selecting MAIN 
MENU/PAPER MENU/INPUT TRAY/TRAY 1 in the control 
panel have priority.
If AUTO is selected, the printer driver settings have priority 
during printing.
If CASSETTE is selected, printing is performed when the...

36 - C130n User’s Guide
INPUT 
TRAY 
(cont.)CUSTOM 
SIZEWIDTH 
(xx)
Settings92-216 mm 
(3.63-8.50 inch)*
* With inch measurements, the 
decimal point does not appear in 
the message window.
For example, 3.63 inches appears 
as 363.
Specify the width of the custom-sized paper 
loaded into Tray 1.
On the model for North America, the settings 
appear in inches and the menu item appears 
as WIDTH(IN). On the models for all other 
regions, the settings appear in millimeters and 
the menu item appears as...

37 - C130n User’s Guide
INPUT 
TRAY 
(cont.)AUTO 
CONTINUESettingsON/OFF
If OFF is selected, an error occurs if the size of paper 
being printed on is different from the size of paper 
specified in the printer driver.
If ON is selected, no error occurs if the size of paper being 
printed on is different from the size of paper specified in 
the printer driver.
TRAY 
CHAININGSettingsYES/NO
If YES is selected and the specified paper tray runs out of 
paper during printing, a paper tray loaded with paper of...

38 - C130n User’s Guide
QUALITY MENU
With this menu, settings for the print quality can be specified.
Quality Menu Tree 
REPLACE TONER
> BLACK
> CYAN
> MAGENTA
> YELLOW
> REMOVE ALL
TONER OUT ACTION
AIDC
> REQUEST AIDC
> MODE
P/H CLEANUP
ECONOMY PRINT
DUPLEX SPEED
Downloaded From ManualsPrinter.com Manuals 

39 - C130n User’s Guide
Quality Menu
NoteAll factory default values are shown in bold.
REPLACE 
TONERBLACKSettingsYES/NO
If YES is selected, the carousel rotates to the black toner 
cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to 
“Replacing a Toner Cartridge” on page 75.
CYANSettingsYES/NO
If YES is selected, the carousel rotates to the cyan toner 
cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to 
“Replacing a...

40 - C130n User’s Guide
AIDCREQUEST 
AIDCSettingsYES/NO
If YES is selected, image adjustments are performed.
MODESettingsON/OFF
If ON is selected, the image adjustments are applied.
If OFF is selected, image adjustments are not applied.
P/H CLEAN  
UPSettingsYES/NO
If YES is selected, the printer enters P/H CLEAN UP mode.
P/H CLEAN UP mode is a mode that allows the user to clean the print 
head window more easily. The print head window is not cleaned 
automatically.
 
For details on cleaning the print...