Oce ColorWave 300 User Manual

Use the Océ PostScript
®
 3 Driver to send a print job
Introduction Océ 
provides the Océ PostScript®
 3 Driver that allows you to send print jobs to your
Océ 
ColorWave 300.
Note:
You need a license to be able to print PostScript ®
 files on the Océ ColorWave 300.
Note:
More information about how to install, configure and use the driver is available in the
documentation 
provided with the Océ PostScript ®
 3 Driver.
■ the Océ 
PostScript ®
 3 Driver Online Help
■ the Océ 
PostScript ®
 3 Driver...

Remarks
Action
Step
From the 'File' menu of the ap-
plication,
 click 
'Print'.
2
Select the Océ 
ColorWave 300
in
 the 'Printer' area of the 'Print'
dialog box.
3
You
 can 
define the default print job set-
tings
 in 
the Océ Express WebTools.
Click
 
'Properties'.
4
Activate the Océ 
Job Ticket to
overrule 
the default values for
the job settings.
5
Check

 and change the Printer
Features

 settings if 
necessary.
6
Click 'OK' to send the print job
to...

Make a fast copy of a CAD drawing
1. Feed 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
Chapter 3
 - Quick start 63Make a
 fast copy of a CAD drawing
Downloaded From ManualsPrinter.com Manuals   

Note:
The description of the second default copy template is displayed ('Fast CAD color copy').
With a copy template you 
can pre-define the settings you need for a copy job. You only
need
 
to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can 
re-use the job template for each next job without
the
 need 
to redefine all the settings every time. (see ‘Define the copy job preferences and
copy
 
templates’  on page 127). 2.
Press...

Make a normal color copy
1. Feed 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
2.
Open the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Use 
the scroll wheel to select copy template 1 ('Normal color copy').
Chapter 3
 - Quick start 65Make a...

Note:
With a copy template you can pre-define the settings you need for a copy job. You only
need
 
to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can 
re-use the job template for each next job without
the
 need 
to redefine all the settings every time. (see ‘Define the copy job preferences and
copy
 
templates’  on page 127). 4.
Press the start 
button. After the scan procedure the scanner releases the original.
Chapter 3
 - Quick...

Make a fast b/w copy of a CAD drawing
1. Feed 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. The 
'Copy' tab is automatically activated on the user panel.
2.
Open the 'Copy' tab 
with the confirmation button above the scroll wheel.
3. Use 
the scroll wheel to select copy template 3 ('Fast CAD b/w copy').
Chapter 3
 - Quick start...

Note:
With a copy template you can pre-define the settings you need for a copy job. You only
need
 
to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can 
re-use the job template for each next job without
the
 need 
to redefine all the settings every time. (see ‘Define the copy job preferences and
copy
 
templates’  on page 127). 4.
Press the start 
button. After the scan procedure the scanner releases the original.
Chapter 3
 - Quick...

Scan a color CAD drawing to PDF format
1. Feed 
the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. 2.
Select 'Scan' 
on the user panel. Chapter 3
 - Quick start 69Scan a
 color CAD drawing to PDF format
Downloaded From ManualsPrinter.com Manuals   

Note:
The description of the first default scan template is displayed ('CAD to color PDF').
With
 a scan template you 
can pre-define the settings you need for a scan job. You only
need
 
to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can 
re-use the job template for each next job without
the
 need 
to redefine all the settings every time. (see ‘Define the scan job preferences and
scan
 
templates’  on page 133). 3.
Press the...