Oce ColorWave 300 User Manual

Caution:
Always store printheads near the printer or allow the printheads to adjust to the printers
environmental conditions before you 
insert them in to printer.How to remove a printhead
1.From

 
the'HOME' screen select the 'System' tab.
2. Select
 the 'Setup' 
tab.
3. Use 
the scroll wheel to go to the 'Printheads'('Replace printheads') wizard. 4.
Open this section with 
the confirmation button.
5. An introduction screen displays the message 'Use this...

The screen displays the message 'Carriage moving into position...' while the carriage
moves
 
to the center.
The
 
screen displays 'Open printhead door.'
8. 'Open
 printhead door.'. The screen displays the message 'Replace printheads' and the print head(s) that you must
replace. Find 
the correct printhead number on the printhead carriage.
9.
Press the front 
of the printhead cover to unlock the cover. Chapter 7
 - Maintain the Océ ColorWave 300 multifunction...

10.
Open the printhead cover. 11.
Pull out the printhead and remove it. How to place a printhead
1. Remove the protective tape from 
the new printhead.
Chapter 7
 - Maintain the Océ ColorWave 300 multifunction printer 283Replace a
 defective printhead
Downloaded From ManualsPrinter.com Manuals 

Hold the printhead at to top.
Note:
Do not touch the contact and nozzle areas of the printhead after you remove the protective
tape.
Chapter 7
 - Maintain the Océ ColorWave 300 multifunction printer284Replace a
 defective printhead
Downloaded From ManualsPrinter.com Manuals 

2.
Place the new printhead in the printhead holder.
The
 
printhead only fits in one way.
3. Close the printhead cover.
4. After

 you 
replaced the defective printhead, press the softkey for 'Next >'
5. The
 screen displays the message 'Make sure that all printhead covers are properly closed.' Press the key for 'Done'.
The

 
screen displays the message 'Close printhead door.'
6. 'Close
 printhead door.'
7. The

 
screen displays 'Preparing...

Replace the maintenance cassette
Introduction
The maintenance cassette wipes the printheads and caps the printhead nozzles.
During
 the print process, the printhead carriage regularly 
moves to the right-hand side
of the printer to 
spit some ink droplets into the maintenance cassette. These actions are
necessary
 to 
keep the printheads in optimal condition.
After
 about 5000 m 2
of
 output (the exact value depends on the print modes you use) the
printer indicates that 
you must replace the maintenance...

The screen displays the message 'Carriage moving to center position...' while the carriage
moves to the center.
Then,
 
the screen displays the message 'Open maintenance door.'
7. Open
 the door 
to the maintenance cassette.
The
 
screen displays the message 'Remove tray.'
8. Press
 the green grip to 
the left to release the cover that gives access to the maintenance
cassette. 9.
Pull 
out the maintenance cassette.
Note:
Always store the old maintenance cassette in a horizontal...

Note:
The packing of the new maintenance cassette also includes a plastic zip lock waste bag.
Use 
this bag to dispose of the old maintenance cassette. How to place the maintenance cassette
1.The 
screen displays the message'Place new maintenance tray.'
2. Slide
 
the new maintenance cassette into the cassette holder.
3. Close
 the cover of the maintenance cassette .
 The cover locks automatically.
4. 'Close
 maintenance door.'
5. The

 
screen displays the message 'Is the tray you...

Remote consumables reading
Introduction
An administrator can remotely read out the Océ ColorWave 300consumables settings
for administrative purposes.
The

 
following Océ ColorWave 300 information is available:
■ Basic
 settings of the system
■ Print

 head information for each 
color
■ Ink 
tank information for each color
■ Maintenance Cassette usage.
Read

 the information 1. Start a Web 
browser (e.g. Internet Explorer) on your workstation.
2. Fill 
in the URL:...

Maintain the scanner
Clean the scanner
Introduction
#
Description / Function
Component
Use this ruler to measure the original.
original
 size ruler
1
A set of rollers used 
to transport the origi-
nal.
original
 feed rollers
2
Top cover of the scanner.
scanner

 top cover
3
Lever to open the top cover of the scanner.
scanner open 
levers
4
A set of rollers to 
guide the original.
original
 support rollers
5
A set of rollers in the top cover to guide the
original.
scanner top 
cover rollers
6
Sensors to...