Oce ColorWave 300 User Manual

Extended scan jobs
Introduction to scan jobs
A basic scan job only takes three steps. Feed the original face up, select 'Scan' on the user
panel and press the start button. Every other type of scan job is called an extended scan
job.
An
 extended scan job takes some additional steps, where you select a specific scan template
and, if 
necessary, change the predefined scan job settings on the user panel. The scan
templates are 
defined in the Océ Express WebTools (see ‘Define the scan job...

Do an extended scan job
1.Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner. 2.
Select 'Scan' 
on the user panel. 3.
Open the 'Scan' 
tab with the confirmation button above the scroll wheel.
4. Select your 
scan template.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer162Do an extended scan job
Downloaded From...

If you want to change the pre-defined settings of the selected scan template, use the
confirmation button to open the scan template and display an overview of the pre-defined
settings groups. 5.
Scroll 
to the settings group you want to change. 6.
■
Open the settings group you want to change with the confirmation button and scroll
to 
the setting you want to change.
■ Open this setting, scroll through the settings values 
and select the correct value with
the
 confirmation 
button.
■ Change the other...

Available settings for scan jobs
Introduction
The Océ ColorWave 300 provides a lot of settings to manage all your different scan jobs.
These
 settings are used for extended scan jobs. The following table gives an overview and
a very 
short description of the available settings. You can find a detailed description of
each
 
setting in the Océ Express WebTools.
Settings
 group: 'Destination' #
Function
Settings values
Setting
'The 
destination to put the scans into.' (see ‘'File...

Function
Settings values
Setting
'Defines whether a color, grayscale or
black-and-white scan must be made. Not
all combinations of 'Color mode' and
'File

 
type' are valid. Changing 'Color
mode'
 resets 'File type', 'Compression for
TIFF' and 'Compression for PDF' to 
a
default value.' 'Color'
'Grayscale'
'Black&white'
'Color'
'The 
file type of the scanned image. The
list
 of file types depends on scan to...

Settings group: 'Resolution'
#
Function
Settings values
Setting
'The resolution of the scanned image in
dpi.' '100'
'200'
'300'
'400'
'600'
'Resolution'
Settings group: 'Original' #
Function
Settings values
Setting
The 
type of original.If scan to color:
'Artwork'
'Line/text'
'Map'
'Poster/photo'
'Folded line/text'
If

 scan to 
grayscale or
black 
and white:
'Line/text'
'Colored...

Function
Settings values
Setting
The width of the original is automatically
detected by the scanner.'Auto'
'Width detect'
'A0'
'A1'
'A2'
'A3'
'A4'
'A5'
'E+
 (36")'
'B1

 
(707 mm)'
'B2
 
(19.69 in)'
The
 
width of the original is a standard
size.
Note:
Depend on the media series you
defined in 
the Océ Express
WebTools 'Standard'
210
 to 914 mm
The width of the original is a custom size. 'Custom'...

Settings group: 'Erase margins'
#
Function
Settings values
Setting
'Erase a strip from the beginning of the
original.' 0 to 400 mm
'Top'
'Erase 
a strip from the bottom of the
original.' 0 to 400 mm
'Bottom'
'Erase 
a strip from the left side of the
original.' 0 to 400 mm
'Left'
'Erase 
a strip from the right side of the
original.' 0 to 400 mm'Right'
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer168Available settings...

Settings group: 'Light and mirror'
#
Function
Settings values
Setting
Increase the value for lighter prints; de-
crease for darker prints. -5 to +5
'Lighter/dark-
er'
'When 'on', the image is mirrored along
the

 vertical axis (the 
media transport di-
rection).'
This
 setting is useful for dark transparent
originals. 'On'
'Off''Mirror'
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 169Available settings for scan jobs
Downloaded From...

'File type'
Depending on the color mode and file type you select the values for the compression
mode
 and organization will change. For some File types, the Compression and Organiza-
tion 
settings cannot be set in all situations.
Color
 mode: Color #
'JPEG quality'
'Compression'
'Organization'
'File type'
'Color' mode
Not applicable
'LZW'
'Packbits'
'None'
'Raw'
'Stripped'
'Tiled'
'TIFF'
'TIFF...