Oce ColorWave 300 User Manual

Settings group: 'Stamp'
#
Function
Settings values
Setting
Copy with a stamp'None'
'Date/time'
'Confidential'
'Draft'
'Copy'
'For review'
'Stamp6'

 ...
 'Stamp12'
'Stamp'
'The position of the stamp inside the leg-
end.''Top'
'Middle'
'Bottom'
'Position'
'The 
size of the stamp.''Small'
'Large'
'Size'
'The 
color of the stamp.''Light...

Settings group: 'Drawing method'
#
Function
Settings values
Setting
Defines which drawing method is used
for
 the legend position. 'DIN'
'Afnor'
'Ericsson'
'Method'
'Defines 
whether the legend is located at
the
 top (leading) or the bottom (trailing).' 'Top'
'Bottom'
'Legend'
Settings group: 'Light and mirror' #
Function
Settings values
Setting
Increase the value for lighter prints; 
de-
crease for darker prints. -5 to +5...

Settings group: 'Sort'
#
Function
Settings values
Setting
If you want to copy multiple sheets, you
can 
indicate how the copied sheets must
be sorted. 'By page'
'By

 set' 'Sort'
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer 193Available settings for copy jobs
Downloaded From ManualsPrinter.com Manuals 

Make multiple sets of copies
Introduction You can 
use the 'Create set' option to make multiple sets of copies.
Before
 you begin If you must enter the same value for a setting very often, you can set this value as the de-
fault value for that 
setting in the Océ Express WebTools.
After
 you 
press the start key, the user panel always shows the job number and status of
the
 job. A copy job appears temporarily in the 'Jobs - Queue' section of the Océ Express
WebTools, 
a scan job appears...

■
Feed the next original, define the settings for this original if necessary and press the
start
 
button.
You can 
use the lower right soft key to return to the default settings of your copy
template.
Repeat this step until 
all originals are fed.
4. Select 'Close set' with 
the lower left soft key.
How
 to make multiple sets of copies sorted by page 1. Feed 
the first original face up.
The
 
scanner takes the original.
2. Open
 the 'Copy' tab 
with the confirmation button above the...

Make a copy with a stamp
Introduction A stamp 
is a pre-defined text you can set on every copy.
Before
 you begin If you must enter the same value for a setting very often, you can set this value as the de-
fault value for that 
setting in the Océ Express WebTools.
After
 you 
press the start key, the user panel always shows the job number and status of
the
 job. A copy job appears temporarily in the 'Jobs - Queue' section of the Océ Express
WebTools, 
a scan job appears in the Smart Inbox...

Scale to another media size
Introduction
You can use the 'Scale' setting to copy to a larger or smaller media format. Use one of the
following methods to scale a copy.
■ Select
 another media format with 
the 'To fit' setting.
■ Adjust
 a value in 
terms of percentage with the 'Custom' setting.
You
 can 
adjust a value between 25 and 400%. A value lower than 100% reduces the
copy,
 a value greater than 100%
 enlarges the copy.
Before
 you begin If you must enter the same value for...

Result
The Océ ColorWave 300 copies to another media size.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer198Scale to another media size
Downloaded From ManualsPrinter.com Manuals 

Make a copy and add a strip
Introduction You can 
use a strip to file a drawing.
Use
 
'Sheet size' to copy an original without a strip and add a strip to the copy. You can
add
 a strip 
at the top or bottom side of a copy.
Use
 'Erase margins' to copy an original with a strip and remove the strip from the copy.
You can erase a margin from the top, the bottom, the left or the right side of the original.
Before you begin If you must enter the same value for a setting very often, you can...

Result
The Océ ColorWave 300 adds a trailing or leading strip to the copy.
Chapter 5
 - Use the Océ ColorWave 300 multifunction printer200Make a
 copy and add a strip
Downloaded From ManualsPrinter.com Manuals