Nortel Compact Ics 6.1 Installer Guide

Maintenance records / 341
P0603539  02Compact ICS 6.1 Installer Guide
System test log record
You can check under the Sys test log heading to find a list of audits, event 
messages, and alarm codes. Use the following table to record these log 
items when you run a Maintenance session.
System test log
Sys test log
Log itemTime of log itemNumber of repetitions
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Time and date that log 
was checked
:           /           / 

342 / Maintenance records
Compact ICS 6.1 Installer GuideP0603539  02
System administration log record
You can check under the Sys admin log heading to find a list of 
administrative events performed on Norstar. Use this table to record these 
log items when you run a Maintenance session.
System administration log
Sys admin log
Log itemTime of log itemNumber of repetitions
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Time and date that log 
was checked
:           /           / 

P0603539  02Compact ICS 6.1 Installer Guide
Specifications
Norstar system
Service tone cadences
Power specifications
*Connection to ac power rated greater than 120 V ac nominal requires an 
approved cord set for that voltage range.
ToneCadence (seconds)
Busy0.5 on / 0.5 off
Expensive route0.3 on / 0.3 off (3 bursts)
Overflow0.25 on / 0.25 off
Ringback2.0 on / 4.0 off
Confirmation1.0 on / 1.0 off (3 bursts followed by no 
tone)
Recall1.0 on / 1.0 off (3 bursts followed by steady 
tone)
Ring splash0.2 on...

344 / Specifications
Compact ICS 6.1 Installer GuideP0603539  02
Telephone loop specifications
Electrical requirements
CharacteristicValue
Loop resistance64 Ω (300 m of 0.5 mm wire or 975 ft of 24 
AWG wire)
Loop length300 m (975 ft) without station auxiliary 
power supply
1200 m (3900 ft) with station auxiliary 
power supply
Minimum voltage at 
telephone11 V dc
Current at telephone (idle)45 mA nominal
Current at telephone 
(active)80 mA maximum
CharacteristicSpec/Value
Electrostatic discharge
     ICS...

Specifications / 345
P0603539  02Compact ICS 6.1 Installer Guide
Environmental requirements
Internal analog terminal adapter (I-ATA)  
ISDN network synchronization  
CharacteristicSpec/Value
Operating temperature 
range0°C to 50°C (32°F to 122°F)
IEC. 68-2-1 Tests Ad and
IEC. 68-2-2, Method A
Storage temperature range-50°C to 70°C (-58°F to 158°F)
IEC. 68-2-1 Test Ab and
IEC. 68-2-2 Test Bd
Humidity
     above 34°C (93°F)
     at 40°C (104°F)5% to 95% (non-condensing)

346 / Specifications
Compact ICS 6.1 Installer GuideP0603539  02 

P0603539  02Compact ICS 6.1 Installer Guide
Glossary
A
AbsorbLength:   A setting that 
determines how many of the digits in a 
destination code will not be dialed by 
the system. AbsorbLength is assigned 
under Destination codes in Services. 
access code:  Different sequences of 
characters used to gain access to these 
Norstar features: Line pools, Call park, 
external lines, Direct-Dial telephone, 
Auto DN, and DISA DN.
alarm code:  A number that appears 
on the alarm telephone display, 
informing you...

348 / Glossary
Compact ICS 6.1 Installer GuideP0603539  02
answered elsewhere in the system, to 
log all calls answered and not answered 
at this telephone, or to not have calls 
automatically logged.
Automatic Dial:  A feature that 
allows you to dial without having to 
pick up the handset or select a line. You 
must have a prime line to use Automatic 
Dial. Automatic Dial is assigned under 
Dialing options in Terminals and Sets 
programming.
Automatic handsfree:  A feature 
which automatically...

Glossary / 349
P0603539  02Compact ICS 6.1 Installer Guide
Button Inquiry:  ²¥â
A feature that allows you to check the 
function of each programmable button 
on your Norstar telephone.
C
Call Duration timer: ²àà
A feature that allows you to see how 
long you spent on your last call or how 
long you have been on your present call.
Call Forward: 
²Ý
A feature that forwards all the calls 
arriving at your telephone to another 
telephone in your Norstar system. To 
have calls forwarded outside the system,...

350 / Glossary
Compact ICS 6.1 Installer GuideP0603539  02
Pickup Directed is enabled under 
Feature settings in System 
programming.
Call Pickup Group:  See Pickup 
Group.
Call Queuing:   
²¡âÚ
If you have several calls waiting at your 
telephone, you can invoke the Call 
Queuing feature to answer them in order 
of priority. Priority is given to incoming 
calls, followed by callback and camped 
calls.
Callback: If you park, camp, or 
transfer a call to another telephone and it 
is not answered there, it...