Nitsuko Digital System Feature And Terminal Programming Manual

The Sample Corporation worksheet entries follow.
 
1
   Assigning Selection Number 0 automatically routes these types of calls
   to Service Number 1. Make sure you program Service Number 1 with
   the DDD lines.
01850C58
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1 NNX
DDD DDD DDD DDD0 271
01850C59
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1 1+
NNX
MCI MCI MCI MCI1 27
01850C60
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1
2 1+
NPA-
NXX...

 
After compiling all the necessary data and completing the ARS Work-
sheet, the data on the worksheet can be transposed to the appropriate
PRF’s for data entry into the system.
01850C55
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1
2
3 1+
312-
355
FX FX FX FX
WATS5 MCIWATS5 WATS5
MCI MCI MCI WATS53 27
05
05
01850C56
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
1 Direct.
assist.
call
(411, or
555 in
any NPA)
DDD DDD DDD DDD4 05DDD
Description
EXAMPLE OF SAMPLE...

Step 6
Complete the Dial Treatments Table PRF (Table 2-4).
The next step is constructing any dial treatments necessary to accommo-
date the services switching the outgoing calls. The first and only choice
for routing NNX (local) calls is on the DDD circuits (Service #1). By not
assigning a Selection Number to any NNX we can accomplish the correct
routing. 
Note:
 If a Selection Number is not assigned to a number, the call will auto-
matically be routed on Service Number 1 (DDD) with no Dial Treatment
....

 
The first choice for calls outside the home NPA, except to (312-355) calls
is WATS5 (Service #5). Class of Service will not restrict access to WATS5
and no special dial treatment is required (just a redial of the initially dialed
digits). Second choice for the above calls outside of the home NPA is the
MCI dial-up service. Only extensions with a COS of 05 or lower can use
MCI, and Dial Treatment 02 must be used. Dial Treatment 02 will:
•Strip the leading 1 (if dialed)
•Dial the MCI local number
•Pause...

The next type of calls to consider are those placed to Area Code 312 ex-
change 355. Since the extension user will dial this call the same way as
any long distance call, each route option must be considered. The first op-
tion for this type of call is the FX route. Since the FX line(s) are directly
terminated to the system, a call to this area code and exchange is a local
call. Hence, we need a dial treatment (03) that will convert the dialed num-
ber into a local type number.  It must strip the leading...

Step 7
Complete the Call Route Options PRF (Table 2-5).
Using the information compiled thus far, fill in the Call Route options for
the four rate periods of each selection number. The Sample Corporation
has five Selection Numbers and four rate periods. Although 19 copies of
the table are required to completely document the routing choices, much
of the information is repetitive.
Selection Number 01 - Rate Periods 1-4
The routing for toll calls within the home NPA dialed with or without the
leading 1 is...

Selection Number 02 - Rate Periods 1, 2, and 3 
Selection Number 02 is used primarily for toll calls outside the home
NPA. First choice for these calls is WATS5 (Service #5). Class of Service
will not restrict access to WATS5. Second choice for calls outside of the
home NPA is the MCI dial-up service. Only extensions with a COS of 05
or lower can use MCI.
 
01850C74
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
0505
0100
01
2
1-3
Description
EXAMPLE OF SAMPLE CORPORATION
46Automatic Route...

Selection Number 02 - Rate Period 4
For Rate Period 4, the MCI dial-up service is more economical than the
WATS service. For Selection Number 02, the route preference and Class
of Service restrictions are reversed from what they are for Rate Periods 1,
2 and 3.
 
Selection Number 03, Rate Periods 1 - 3
Selection Number 03 is used for routing calls to 312 - 355. The first rout-
ing choice is the FX terminated at 312 - 355. The second choice is the
WATS 5 service; the third choice is MCI. The FX and WATS 5...

 
Selection Number 03 - Rate Period 4 uses the same routing as Rate Periods 1-
3 except that the positions of the WATS5 and MCI services are reversed. In ad-
dition, the Class of Service restriction on MCI is removed and placed on
WATS 5. Dial Treatments remain the same.
 
01850C72
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
2703
0503
00
3
1-3
05 01 02
01850C71
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27
2703
0103
02
3
4
05 05 00
Description
EXAMPLE OF SAMPLE CORPORATION...

Selection Number 04, Rate Periods 1 - 4
Selection number 04 is used to apply Class of Service restrictions on Di-
rectory Assistance calls. All 411 and 555 calls are routed to the AT&T
DDD service; however, these calls can be placed only from extensions
with Class of Service 05 or lower. Call routing is identical for all four
Rate Periods. Dial Treatment 00 is specified.
 
01850C75
OPT # COS SER # DT #
1
2
3
16
SELECTION #
RATE PERIOD
27 01 00
4
1-4
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic...