Nitsuko Digital System Feature And Terminal Programming Manual

- For Your Notes -
V- CLEAR ERROR LOG
564   PROGRAMMING N1870SWG04   Issue 1-0 

X- EXCHANGE EXTENSION DATA
Description
Use this option to swap two extensions or trunks without physically moving their ports.  This allows extensions
to retain their programmed options if you move them around a facility. Assume, for example, you swap exten-
sions 304 and 305.  Port 05 now has extension 304.  Port 04 has extension 305.
Keep the following in mind when programming ports:
•The main attendant should stay at extension 300/port 00
•Use HH- Port/Extension Checker to make sure each port has only...

- For Your Notes -
X- EXCHANGE EXTENSION DATA
566   PROGRAMMING N1870SWG04   Issue 1-0 

Y- CHANGE SYSTEM PASSWORDS
Description
Use this option to change the level 1 or level 2 password.  You must know the level 1 or level 2 password to
change the level 1 password.  You must know the level 2 password to change the level 2 password.  Remember
that entering a new password erases the old one.  Keep a written record of the modified passwords.
Conditions 
If you change your passwords and forget them, call your technical service representative for assistance.
Default Value
•The default level 1...

- For Your Notes -
Y- CHANGE SYSTEM PASSWORDS
568   PROGRAMMING N1870SWG04   Issue 1-0 

Z- CLEAR ALL SMDR RECORDS
Description
Use this option to clear (erase) the SMDR records from the SMDR buffer without printing the SMDR report.
Clear the record when you change the SMDR print options  If you implement this option, all records stored in
the buffer are lost.
Conditions 
None
Default Value
N (Records will not be cleared)
Feature Reference
Station Message Detail Recording
System Reports, Diagnostics and Maintenance Utilities
Instructions
To enter data on the PRF:
No entry required.
To enter...

- For Your Notes -
Z- CLEAR ALL SMDR RECORDS
570   PROGRAMMING N1870SWG04   Issue 1-0 

Appendix A
Automatic Route Selection 

ARS SupplementHOW TO USE THIS SUPPLEMENT
This supplement describes ARS in four sections as follows:
Section 1, DESCRIPTION
Section 1 introduces Automatic Route Selection and defines the common
terms and abbreviations used in this supplement. Section 1 also provides
an ARS overview.
Section 2, SOFTWARE CONFIGURATION
The SOFTWARE CONFIGURATION Section provides summarized and
detailed instructions for compiling ARS data. The data is entered on the
ARS Program Record Forms at the end of the section.
Section...