Nitsuko Digital System Feature And Terminal Programming Manual

Dial Treatments
For each Call Route Option, a Dial Treatment is available to accommodate
special dialing instructions. ARS has a total of 16 Dial Treatments, 15 of
which you can program. These Dial Treatments can:
•Require that the user enter an authorization code when placing a call
•Automatically insert or delete a leading 1
•Insert or delete an NPA
•Add digits (such as a dial-up OCC number), pauses and waits to the
dialing sequence
Once ARS selects the route for the call, the system seizes an...

SOFTWARE CONFIGURATION
Section 2, Software Configuration
Table of Contents
Configuration Introduction .........................................................................13
How to Configure ARS ...............................................................................13
Completing the Program Record Forms .....................................................15
Completing the Carrier List .......................................................................15
Completing the Rate Period Table...

Description
SOFTWARE CONFIGURATION
12Automatic Route Selection 

CONFIGURATION INTRODUCTION
The SOFTWARE CONFIGURATION Section provides the instructions for
completing the ARS Program Record Forms (included at the end of this sec-
tion). Once completed, these Program Record Forms (PRFs) become the ARS
data base which defines system call routing. You enter the data compiled on
the PRFs into system memory during programming. 
How to Configure ARS
Before entering any data into the Program Record Forms, read this entire sec-
tion. This gives you an overview of Automatic...

Step 9
Assign route selections to equal access, international, and operator-as-
sisted calls. Record the entries on the 6-Digit Table PRF (Table 2-7).
Step 10
If required, program Authorization Codes. A user’s Class of Service may
require that the user enter an Authorization Code when placing a call. Re-
fer to the QW Program in the System Software manual.
Description
CONFIGURATION INTRODUCTION
14Automatic Route Selection 

COMPLETING THE PROGRAM RECORD FORMS
Completing the Carrier List
Use the Carrier List (Table 2-1) to record the carriers and services connected
to the system. Make as many copies of this table as are required to record all
the information. The entries on this table are never entered directly into sys-
tem memory, although the information is used when establishing the Call
Route Options.
In the CARRIER column, list all the carriers connected to the system (i.e,
AT&T, GTE, etc). Next, record the various...

Many of the carriers use these predefined rate periods. If the system is con-
nected to carriers that use these Rate Periods, the initialized values can be
used; however, if carriers are used that have different (or additional) Rate Peri-
ods, the Rate Period Table must be redefined. The following is an example
showing how to construct a Rate Period Table.
To construct a Rate Period Table:
Step 1
Make extra copies of Table 2-2 as needed. For eight rate periods, you’ll
need the original plus three...

To indicate a half hour, begin on the line between two times. The follow-
ing example indicates that Rate Period 1 covers Monday-Friday, 7:30
A.M. to 5:00 P.M. 
Step 3
Determine if Rate Period 1 is applicable for any other days (Saturday, Sun-
day or Holidays). If so, indicate this on the Rate Period 1 Table.
Step 4
Using the same procedure as step 1 above, define the Rate Period 2 Table.
Since a time of day cannot exist in two Rate Periods, it is not permissible
for any Rate Periods to overlap. For...

This is an acceptable configuration.
 
00
01850C53
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRIRATE PERIOD
1
00
01850C47
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRIRATE PERIOD
2
Description
COMPLETING THE PROGRAM RECORD FORMS
18Automatic Route Selection 

A new Rate Period can be introduced that divides an existing Rate Period.
In the example below, Rate Period 3 divides Rate Period 2.
 
00
01850C48
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRIRATE PERIOD
2
00
01850C49
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRIRATE PERIOD
3
Description
COMPLETING THE PROGRAM RECORD FORMS
Automatic Route Selection19