Nitsuko Digital System Feature And Terminal Programming Manual

Step 8
Complete the 3-digit and 6-Digit Tables
The 3-Digit Table
The 3-digit Table PRF (Table 2-6) is used to assign Selection Numbers to
NPA and NNX codes. Codes with similar routing requirements should
have the same Selection Number. To enter data for Sample Corporation on
the 3-digit table, refer to the sample table (on the page 2-42) and use the
procedure that follows:
•Initially assign all NPA codes to Selection Number 02. This data
will be block-loaded into the system during program entry (refer...

•For the MINIMUM COS TO DIAL 976? prompt, enter 00. Only ex-
tensions with Class of Service 00 can dial exchange 976. 
•800 is a Toll-Free NPA for DDD, and should be assigned no Selec-
tion #.
Note: 
911 and in some cases 1+911 are EMERGENCY codes used on the
DDD Network. These codes MUST be routed to the DDD Network and
access MUST be granted to all instruments with access to outgoing lines.
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection51 

3-Digit Table for Sample Corporation
 
* 800 is a Toll-Free NPA for DDD and should not be assigned a Selection
#.
** 911 (and in some cases 1+911) are Emergency Codes used on the DDD
network. These codes must be routed to the DDD network and access
must be granted to all telephones with access to outgoing lines.
SYSTEM IN A CONFLICT AREA?
YES NOMINIMUM COS TO DIAL 976?
01850C68
X00*
3-DIGIT
CODE1+CODE
SEL # CODE
SEL #
200-219
300-319
400-419
500-519
600-619
700-719
801-819
900-919
911
41102 02
02 02
02...

The 6-Digit Table
The 6-Digit Table PRF (Table 2-7) is used for NPA 312 to identify calls to
the 312-355 FX exchange. If a MATCH occurs, Selection Number 03 is
chosen. All other calls to NPA 312 are routed as long distance calls out-
side of the home NPA. Enter NPA 312 and an NNX list of 355 as shown
below:
 
AREA 
CODEMATCH
SEL #DEFAULT
SEL #NNX
LIST
01850C77
312 03 02 355
6-Digit Table for Sample Corporaton
Description
EXAMPLE OF SAMPLE CORPORATION
Automatic Route Selection53 

Step 9
Assign E.A. & OPER-ASSIST data to Table 2-7.
Enter the Selection Number required to route Operator assisted, Equal ac-
cess, and International calls as described in the carrier list. Only COS5
and lower have access and route to these types of calls.
 
Step 10
Program Authorization Codes.
Authorization codes (QW) are not required by this example.
01850C78
OPERATOR ASSISTED
CALLS SEL #
INTERNATIONAL
CALLS SEL #
EQUAL ACCESS CALLS
SELECTION #04
04
04
Description
EXAMPLE OF SAMPLE CORPORATION...

PROGRAM RECORD FORM
Table 2-1, CARRIER LIST PROGRAM RECORD FORM
 
CARRIERSERVICE
TYPESERVICE
#USAGE INFORMATION
01850C65
Description
PROGRAM RECORD FORM
Automatic Route Selection55 

TABLE 2-2, RATE PERIODS PROGRAM RECORD FORM
 
00
01850C51
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRI
SAT
SUN
HOL
MON-FRI
SUN
SAT
HOL
RATE PERIOD
00
01850C51
0102030405060708091011121314151617181920212223 24 DAY 
OF 
WEEKTIME SLOTS
MON-FRI
SAT
SUN
HOL
MON-FRI
SUN
SAT
HOL
RATE PERIOD
Description
PROGRAM RECORD FORM
56Automatic Route Selection 

TABLE 2-3, ARS WORKSHEET
 
01850C54
SERVICE TYPE
Rate Period
OPT
# TYPE OF
CALLREQ
COSSEL
#
12345678
Description
PROGRAM RECORD FORM
Automatic Route Selection57 

Table 2-4, DIAL TREATMENT TABLE PROGRAM RECORD FORM
 
01850C61
DT# DIAL TREATMENT ENTRY
Description
PROGRAM RECORD FORM
58Automatic Route Selection 

Table 2-5, CALL ROUTE OPTIONS PROGRAM RECORD FORM
 
01850C69
OPT # COS SER # DT #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SELECTION #
RATE PERIOD
Description
PROGRAM RECORD FORM
Automatic Route Selection59