Nitsuko 124i/384i Software Manual

0800 - Night Service Options0801 - Automatic Night Service Patterns
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available — five patterns for each of
four Tenant Groups.
INUse Program 0801 - Automatic Night Service Patterns to set up the Automatic Night Service patterns. There
are five different patterns. Each pattern lets you assign one of four different Night Service Modes (Day, Night,
Midnight and Rest) to the time periods in a day. You can configure up to 10...

Typical Night Service Pattern Example
Time Period Start Stop Mode
1 00:00 9:00 2 (Midnight)
2 12:00 13:00 3 (Rest)
3 17:00 18:00 3 (Rest)
4 18:00 22:00 1 (Night)
5 22:00 00:00 2 (Midnight)
Feature Cross Reference
Night Service
Telephone Programming Instructions
To enter data for Program 0801 (Night Service Patterns):
Refer to the chart on the previous page for a description of each of the following options.
1. Enter the programming mode.
2. 0801 + HOLD
Tenant No?
3. Enter the number of the Tenant Group...

13. Enter the Time Period Mode (0-3) for the time period selected.
Modes are 0 (Day Mode), 1 (Night Mode), 2 (Midnight Mode) and 3 (Rest Mode).
14. HOLD
Set No?
15. Return to step 7 and program another Night Service time period.
OR
HOLD to return to step 5 and enter another pattern number.
OR
HOLD + HOLD to return to step 3 and enter another Tenant Group number.
OR
HOLD + HOLD + HOLD to exit
0800 - Night Service Options
0801 - Automatic Night Service Patterns
92000SWG08  Issue 1-0 PROGRAMMING   837 

0802 - Weekly Night Service Switching
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available — with unique entries for
each of the four Tenant Groups.
INUse Program 0802 - Weekly Night Service Switching to assign one of the five Automatic Night Service patterns
you set in Program 0801 to each day of the week. You can make different assignments for each Tenant Group.
Conditions
None
Feature Cross Reference
Night Service
Telephone Programming Instructions
To enter data for...

0803 - Holiday Night Service Switching
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available — with unique entries for
each of the four Tenant Groups.
INUse this Program 0803 - Holiday Night Service Switching to assign one of the five Automatic Night Service
patterns to holidays. The settings in this program override the settings you make in Program 0802. You can
make a different entry for each Tenant Group.
Conditions
None
Feature Cross Reference
Night Service...

— For Your Notes —
0800 - Night Service Options
0803 - Holiday Night Service Switching
840   PROGRAMMING 92000SWG08   Issue 1-0 

0900 - Trunk Options0901 - Basic Trunk Port Setup (Part A)
 Sorts Data
✔ Updates CEU
✔  Can be Copied
Description
 124i Available — 52 trunk ports. 384i Available — 128 trunk ports. Item
24 requires system software 3.05.10.
Items 14-17 entry 6 (T1 wink start
ANI/DNIS) requires 384i system
software 3.06.02.
- Enhanced Answer Supervision in
Item 24 requres Base 2.13 or
EXCPRU 2.18. See page  844.- Enhanced Answer Supervision in
Item 24 requires system software
3.05.15. See page  844.
- Enabling/disabling...

Basic Trunk Port Setup (Part A)
Option Description Range Default
Items
7-10Behind PBX 
Use these items to indicate if the trunk is installed
behind a PBX.  There is one item for each of the
Night Service Modes:
Item 7 = Day Mode
Item 8 = Night Mode
Item 9 = Midnight Mode
Item 10 = Rest Mode0 = Stand alone 
1 = Behind PBX 
2 = Not used 0 (For items
7-10)
Item 11Dial Tone Detection for Directly Accessed
Trunks
Use this option to enable/disable dial tone
detection for directly accessed trunks.  If...

Basic Trunk Port Setup (Part A)
Option Description Range Default
Item 19Toll Restriction 
Use this option to enable/disabled Toll Restriction
for the trunk.  If enabled, the trunk follows
Program Series 0700 programming.  If disabled,
the trunk is a toll free line. 0 (Toll Restriction
enabled)
1 (Toll Restriction
disabled)0 (Toll
Restriction
enabled) 
Item 20Forced Release of Held Call 
Use this option to enable/disable forced release for
calls on Hold.  If enabled, the system disconnects
a call if it is...

Basic Trunk Port Setup (Part A)
Option Description Range Default
Item 29DTMF Tones for Outgoing Calls
Use this option to enable (1) or disable (0) DTMF
tones for outgoing trunk calls.0 (Disabled)
1 (Enabled)0 (Disabled)
Item 30 Not used
Item 31Loop Disconnect Supervision
Use this option to enable (1) or disable (0) loop
supervision for the trunk. This option is required
for Call Forwarding Off-Premise and Tandem
Trunking only.0 (Disabled)
1 (Enabled)0 (Disabled)
Enhanced Answer Supervision (Item 24)...