Nitsuko 124i/384i Software Manual

Feature Cross Reference
Refer to the chart above.
Telephone Programming Instructions
To enter data for Program 0901 (Basic Trunk Port Setup [Part A]):
1. Enter the programming mode.
2. 0901 + HOLD
TRK No?
3. Enter the number of the trunk (1-52 or 1-128) you want to program + HOLD.
Item No?
4. Enter the number of the item you want to program + HOLD
Refer to the above chart for information on each item.
5. Enter data for the item selected + HOLD
Refer to the above chart for information on each item’s...

0902 - Trunk Ring Tone Range
 Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available — 52 trunk ports. 384i Available — 128 trunk ports.
INUse Program 0902 - Trunk Ring Tone Range to select the ring tone range for the trunk. The trunk uses a ring tone
within the range selected when it rings an extension. There are four ring tones available (see the Trunk Ring Tone
Range entries in Table 1-7). Customize the Trunk Ring Tones in Program 0111. Also see Program 1001 Item 2 to
select the tone...

0903 - Trunk Names
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 52 trunk ports. 384i Available — 128 trunk ports.
INUse Program 0903 - Trunk Names to set the names for trunks. The trunk name displays at display keysets for
incoming and outgoing calls.
Use the following chart when programming names (up to 10 digits). Press DND to toggle between upper and
lower case letters.
Keys for Entering Names
Use this key . . . When you want to . . .
DSS1 Enter characters A-D. After...

Feature Cross Reference
Name Storing
Telephone Programming Instructions
To enter data for Program 0903 (Trunk Names):
1. Enter the programming mode.
2. 0903 + HOLD
TRK No?
3. Enter the number of the trunk you want to program (1-52 or 1-128) + HOLD
LINE nnn -
The previously programmed name displays.
4. Enter the trunk’s name.
Refer to the chart on the previous page when entering names.
5. HOLD
TRK No?
6. Repeat from step 3 to select another trunk.
OR
HOLD to exit.
0900 - Trunk Options
0903 - Trunk Names...

0904 - Trunk Tenant
✔ Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Not available. 384i Available — four Tenant Groups.
INUse Program 0904 - Trunk Tenant to assign trunks (1-128) to Tenant Groups (1-4) in 384i.
Conditions
None
Feature Cross Reference
Tenant Service
Telephone Programming Instructions
To enter data for Program 0904 (Trunk Tenant):
1. Enter the programming mode.
2. 0904 + HOLD
TRK NO?
3. Enter the number of the trunk you want to program + HOLD
TRK_nnn:
4. Enter the number of...

0905 - Trunk Groups
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 52 trunk ports in 16
Trunk Groups. 384i Available — 128 trunk ports in 128
Trunk Groups.
INUse Program 0905 - Trunk Groups to assign trunks to Trunk Groups. You can also assign the outbound prior-
ity for trunks within the group. When users dial up the trunk group, they seize the trunks in the order you specify
in the outbound priority entry.
Conditions
None
Feature Cross Reference
Trunk Groups
Telephone...

0906 - Trunk Group Routing (Dial 9)
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 16 trunk groups and 36
routes. 384i Available — 128 trunk groups and
64 routes.
INUse Program 0906 - Trunk Group Routing (Dial 9) to set up an outbound routing table for the trunk groups
you assigned in Program 0905. When users dial 9, the system routes their calls in the order (priority) you spec-
ify. For example, if a user dials 9 and all calls in the first group are busy, the system may...

Conditions
The system also uses this program for Ringing Line Preference (for trunk calls). Refer to Program 1015.
Feature Cross Reference
Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 0906 (Trunk Group Routing):
1. Enter the programming mode.
2. 0906 + HOLD
Route No?
3. Enter the number of the route you want to program (1-64 in 384i, 1-36 in 124i).
4. HOLD
Order No?
5. For the group or route you assign in the next step, enter the priority number (1-4) + HOLD
The system...

0907 - Trunk Group Routing for Extensions
 Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available — 96 extensions/virtual
extensions and 36 routes. 384i Available — 384 extensions/virtual
extensions and 64 routes.
INUse Program 0907 - Trunk Group Routing for Extensions to assign Program 0906 routes to extensions. You
can have a different route for each Night Service mode:
DAY = Day Mode
NIGHT = Night Mode
MID = Midnight Mode
REST = Rest Mode
Conditions
None
Feature Cross Reference
Trunk...

0908 - Trunk Group Routing for DCI Ports
 Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available — 72 DCI ports and 36
routes. 384i Available — 288 DCI ports and 64
routes.
INUse Program 0908 - Trunk Group Routing for DCI Ports to assign Program 0906 routes to DCI software
ports. You can have a different route for each Night Service mode:
DAY = Day Mode
NIGHT = Night Mode
MID = Midnight Mode
REST = Rest Mode
Conditions
None
Feature Cross Reference
Data Communications Interface (DCI)...