Home > Nitsuko > Communications System > Nitsuko 124i/384i Software Manual

Nitsuko 124i/384i Software Manual

Here you can view all the pages of manual Nitsuko 124i/384i Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 861

0700- Toll Restriction0701 - Toll Restriction Class
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — eight Toll Restriction
classes. 384i Available — 15 Toll Restriction
Classes in each of 4 Tenant Groups.
INUse Program 0701 - Toll Restriction Class to set the system’s Toll Restriction. In 384i, each of the four tenants
can have 15 Toll Restriction Classes, for a system maximum of 60.  There are eight Toll Restriction classes in
124i. See the Toll Restriction Routing flowchart...

Page 862

Toll Restriction Class
Option Description Range Default 
(Class 1)
Item 1International Call Restrict Table 
This option assigns/unassigns the International
Call Restrict Table for the Toll Restriction Class
you are programming.  The system uses this table
for international call restriction.  Enter
International Call Restrict Table data in Program
0702 (Item 1).0 (Unassigned) or 1
(Assigned)0 (Unassigned)
Item 2International Call Permit Table 
This option assigns/unassigns the International
Call Permit...

Page 863

Toll Restriction Class
Option Description Range Default 
(Class 1)
Item 7Restriction for Common Abbreviated Dialing 
Use this option to enable/disable Toll Restriction
for Common Abbreviated Dialing numbers.  If
enabled, Common Abbreviated Dialing numbers
have the same restrictions as manually dialed
numbers.0 (Disabled) or 1
(Enabled)0 (Disabled)
Item 8Restriction for Group Abbreviated Dialing 
Use this option to enable/disable Toll Restriction
for Group Abbreviated Dialing numbers.  If
enabled, Group...

Page 864

Conditions
None
0701 Default Settings
Item No. Class of Service Number
123456789101112131415
1 011110000000000
2 010000000000000
3 001230000000000
4 001230000000000
5 011111100000000
6 011110000000000
7 000000000000000
8 000000000000000
9 000000000000000
10 000000100000000
11 001230000000000
12 000000000000000
Note: Toll Restriction Classes 9-15 don’t apply to 124i.
Feature Cross Reference
Toll Restriction
Telephone Programming Instructions
To enter data for Program 0701 (Toll Restriction Class):
1....

Page 865

9. Return to step 7 and select another Item Number.
OR
HOLD to return to the Class No? prompt.
Press HOLD once more for the Tenant No? prompt; twice more to exit.
0700- Toll Restriction
0701 - Toll Restriction Class
92000SWG08  Issue 1-0 PROGRAMMING   829 

Page 866

0702 - Toll Restriction Tables
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0702 - Toll Restriction Tables to specify the Toll Restriction Tables, digit length restrictions and
the PBX access code. Valid entries are 0-9, # and *. You can also use FLASH as a don’t care (wild card) digit.
Each Tenant Group can have a different set of entries for this program. Refer to the chart below for a description
of each option, its range and default setting....

Page 867

Toll Restriction Tables
Option Description Range Default
Item 5Permit Code Table 
This option lets you program the Permit Code
Tables.  If the system has Toll Restriction enabled,
users can dial numbers only if permitted by these
tables and the Common Permit Table (Item 7).
There are four Permit Code Tables, with up to 60
entries in each table. The system permits calls
exactly as you enter the code.  For example, to
permit 1-203 calls you must enter 1203 into a
Permit Table. Each Permitted Code Table...

Page 868

Conditions
None
Feature Cross Reference
Toll Restriction
Telephone Programming Instructions
To enter data for Program 0702 (Toll Restriction) Items 1-4 and 7-9:
1. Enter the programming mode.
2. 0702 + HOLD
Tenant No?
3. Enter the Tenant Number you want to program (1-4) + HOLD
Item No?
4. Enter the number of the item you want to program (1-4, 7-9) + HOLD
Entry No?
5. Select the entry you want to program + HOLD
The table above explains the entries for each item.
6. Enter the data for the selected entry +...

Page 869

HOLD + HOLD to return to step 4
OR
HOLD + HOLD + HOLD to return to step 3
OR
HOLD four times to exit.
0700- Toll Restriction
0702 - Toll Restriction Tables
92000SWG08  Issue 1-0 PROGRAMMING   833 

Page 870

— For Your Notes —
0700- Toll Restriction
0702 - Toll Restriction Tables
834   PROGRAMMING 92000SWG08   Issue 1-0 
Start reading Nitsuko 124i/384i Software Manual

Related Manuals for Nitsuko 124i/384i Software Manual

All Nitsuko manuals