Nitsuko 124i/384i Software Manual

0509 - 
Description
 124i Not available. 384i Not available.
This program is currently not used.
0500 - System Numbering
0509 - 
92000SWG08  Issue 1-0 PROGRAMMING   795 

0510 - Trunk Access Code
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available in Base 2.13, EXCPRU
2.18 or higher — one Tenant Group. 384i Available. Each Tenant Group (1-4)
can have a unique Trunk Access
Code.
INUse Program 0510 - Trunk Access Code to assign the single-digit trunk access code (normally 9). This is the
code extension users dial to access Automatic Route Selection or Trunk Group Routing.
Caution
The digit 9 is defined in Program 0501 as Dial Type 6 with the Number of...

0511 - Service Code Setup (Part A)
✔ Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available in Base 2.13, EXCPRU
2.18 or higher —  one Tenant Group.
Does not include ACD codes. 384i Available. Each Tenant Group (1-4)
can have unique Service Codes.
INUse Program 0511 - Service Code Setup (Part A) to customize the first set of Service Codes. You can custom-
ize additional Service Codes in Program 0514 (Service Code Setup [Part B] on page 806. The following chart
shows:
•The number of each...

Program 0511 – Service Code Setup, Part A
ItemDefaultNew Feature Function
014#1Conference Adding a caller to a Conference from a
Single Line Telephone
015809Call Waiting / Camp
OnSending Call Waiting tones to a busy
extension. This code is only available if
you disable Single Digit dialing code 09
in Program 0512.
016*#Group Call Pickup Picking up a call ringing an extension in
your own pickup group
017869Group Call Pickup Answering a call ringing a phone in
another pickup group (if you don’t know
the...

Program 0511 – Service Code Setup, Part A
ItemDefaultNew Feature Function
035- Not used
036851Programmable
Function KeysChanging the function of a programmable
key
037#*#*System Programming Entering the programming mode
038- Not used
039828Time and Date Setting the system Time and Date
040812Handsfree
Answerback/Forced
Intercom RingingChanging the way your extension signals
the extension you are calling
041875Toll Restriction
OverrideTemporarily overriding an extension’s Toll
Restriction
042- Not used...

Program 0511 – Service Code Setup, Part A
ItemDefaultNew Feature Function
058862Hold Picking up a call on Group Hold
059820Selectable Ring Tones Changing your extension’s incoming ring
tones
060808Department Step
CallingCycling to the next member of a
Department Calling Group. This code is
only available if you disable Single Digit
Dialing code 09 in Program 0512.
061810Barge In Barging in on an extension’s call
062-Call Forwarding Enabling Call Forwarding No Answer.
This code is currently not...

Program 0511 – Service Code Setup, Part A
ItemDefaultNew Feature Function
082- Not used
083892Off Hook Signaling Forcing Off Hook Signaling to voice
announce your phone
084893Off Hook Signaling Forcing Off Hook Signaling to ring your
phone
085-Call Forwarding Enabling Call Forward Immediate. This
code is currently not implemented.
086##Account Codes Entering Account Codes from a Single
Line Telephone
087- Not used
088- Not used
089- Not used
090830Remote Maintenance This code is currently not...

In 124i systems, skip to step 4.
3. Enter the number of the Tenant Group you want to program (1-4) + HOLD
SRVCD?
4. Enter the number of the Service Code you want to program (001-100) + HOLD
SRVCD_nnn
The previously programmed value displays
5. Enter the Service Code data + HOLD
SRVCD?
6. Repeat from step 4 to program another Service Code.
OR
HOLD + Repeat from step 3 to select another Tenant Group (or exit in 124i)
OR
HOLD + HOLD to exit (in 384i).
0500 - System Numbering
0511 - Service Code Setup (Part...

0512 - Single Digit Service Code Setup
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available in Base 2.13, EXCPRU
2.18 or higher  — one Tenant Group. 384i Available. Each Tenant Group (1-4)
can have unique Single Digit Service
Codes.
INUse Program 0512 - Single Digit Service Code Setup to assign the Single Digit Service Codes. These are the
post-dialing codes a user can dial after placing an Intercom call to a co-worker. Available post-dialing codes are
0-9, # and *. The following...

Conditions
None
Feature Cross Reference
Refer to the chart above.
Telephone Programming Instructions
To enter data for Program 0512 (Single Digit Service Code Setup):
1. Enter the programming mode.
2. 0512 + HOLD
Tenant No?
In the 124i, skip to step 4.
3. Enter the number of the Tenant Group you want to program (1-4) + HOLD
SRVCD?
4. Enter the number of the Single Digit Service Code you want to program (01-12) + HOLD
SRVCD_nn:n
The previous assignment displays.
5. For the code selected in the previous...