Nitsuko 124i/384i Software Manual

0513
Description
 124i Not available. 384i Not available.
This program is currently not used.
0500 - System Numbering
0513
92000SWG08  Issue 1-0 PROGRAMMING   805 

0514 - Service Code Setup (Part B)
✔  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available in Base 2.13, EXCPRU
2.18 or higher — one Tenant Group.
Does not include ACD, Hotel/Motel
or Personal Park codes. 384i Available. Each Tenant Group (1-4)
can have unique Service Codes.
INUse Program 0514 - Service Code Setup (Part B) to customize the second set of Service Codes. You can cus-
tomize additional Service Codes in Program 0511 (Service Code Setup [Part A] on page 797). The following...

Program 0514 – Service Code Setup, Part B
Item Default New Feature Function
014*3Forced Trunk
DisconnectDisconnecting a call in progress on a trunk
015*21Voice Mail Enabling Personal Answering Machine
Emulation. This code is currently not used.
016126Hotel/Motel Leaving a Message Waiting (set 2)
017127Hotel/Motel Enabling Hotel Do Not Disturb (set 1)
018128Hotel/Motel Canceling Hotel Do Not Disturb (set 1)
019129Hotel/Motel Enabling Hotel Do Not Disturb (set 2)
020130Hotel/Motel Canceling Hotel Do Not...

Program 0514 – Service Code Setup, Part B
Item Default New Feature Function
039- Not used
040150Department Calling Logging in or logging out of your
Department Calling Group
041*1Paging, Internal
Paging, ExternalMaking a Combined Page
042152 Not used
043#8Tandem Trunking
(Unsupervised
Conference)Setting up an Unsupervised Conference
from a Single Line Telephone
044154Voice Mail Enabling Conversation Record at a Digital
Single Line Telephone
045155Automatic Call
Distribution (ACD)ACD agent logout...

Program 0514 – Service Code Setup, Part B
Item Default New Feature Function
060170Automatic Call
Distribution (ACD)Allows an agent to change their own status.
061882T1 Trunking (with
ANI/DNIS
CompatibilitySetting up ANI/DNIS routing to the VAU
Automated Attendant.
062886E911 Compatibility Turning off the E911 alarm ring.
063- Not used
064- Not used
065867Conference Allows a CO line in a Conference call to
be retrieved out of the Conference.
066- Not used
067- Not used
068- Not used
069- Not used
070- Not...

Program 0514 – Service Code Setup, Part B
Item Default New Feature Function
089- Not used
090- Not used
091- Not used
092- Not used
093- Not used
094- Not used
095- Not used
096- Not used
097- Not used
098- Not used
099- Not used
100- Not used
Conditions
None
Feature Cross Reference
Refer to the chart above.
Telephone Programming Instructions
To enter data for Program 0514 (Service Code Setup, Part B):
1. Enter the programming mode.
2. 0514 + HOLD
Tenant No?
In the 124i, skip to step 4.
3. Enter the...

0515 - VAU Master Number
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0515 - VAU Master Number to assign Voice Announce Unit master number (200-799). Nor-
mally, you should use unassigned extension numbers (e.g., 600). If you want to use a number in the normal ex-
tension number range (e.g., 301-556 in 384i), first remove the default assignment. For example, to use extension
number 325 for the VAU master number, first give extension port 025 a...

0516 - Voice Mail Master Number
  Sorts Data   Updates CEU   Can be Copied
Description
 124i. Available. 384i. Available.
INUse Program 0516 - Voice Mail Master Number to set the Voice Mail master number. This is the number us-
ers dial to reach the Voice Mail. The range is 200-799. Normally, you should use unassigned extension numbers
(e.g., 600) for the master number. If you want to use a number in the normal extension number range (e.g., 301-
556 in 384i), first remove the default assignment. For...

Keys for Entering Names
Use this key . . . When you want to . . .
Dialpad digits 0-9, #
and *.Enter numbers, # and * as part of the name. You don’t need
to press CHECK after entering these characters.
Conditions
None
Feature Cross Reference
Voice Mail
Telephone Programming Instructions
To enter data for 0516 (Voice Mail Master Number):
1. Enter the programming mode.
2. 0516 + HOLD
Dial:
3. Enter the Voice Mail Master Number (e.g., 500) + HOLD
Name:
4. Enter a name for the Voice Mail Master Number.
Refer...

0517 - 
Description
 124i Not available. 384i Not available.
This program is currently not used.
0500 - System Numbering
0517 - 
814   PROGRAMMING 92000SWG08   Issue 1-0