Nitsuko 124i/384i Software Manual

Feature Cross Reference
Flexible System Numbering
Telephone Programming Instructions
To enter data for Program 0501 (System Numbering):
1. Enter the programming mode.
2. 0501 + HOLD
Tenant No?
For 124i systems, skip to step 4.
3. Enter the number of the Tenant Group you want to program (1-4) + HOLD
DIAL?
4. Enter the digit(s) you want to change + HOLD
You can enter either one or two digits. Refer to the Dialed Number column in the table begin-
ning on page 779.
Digit:n
5. Enter the number of digits...

0502 - Extension Numbers and Names
  Sort Data   Updates CEU   Can be Copied
Description
 124i Available — extension ports are 1-
72; virtual extension ports are 73-96. 384i Available — extension ports are 1-
256; virtual extension ports are
257-384.
INUse Program 0502 - Extension Numbers and Names to set the extension/virtual extension numbers and
names. This lets an employee move to a new location (port) and retain the same extension number and name.
Use the following chart when programming names (up...

Conditions
None
Feature Cross Reference
Department Calling
Intercom
Telephone Programming Instructions
To enter data for Program 0502 (Extension Numbers and Names):
1. Enter the programming mode.
2. 0502 + HOLD.
STA PORT No?
3. Enter the number of the extension port you want to program.
In 384i, extension ports are 1-256. Virtual extension ports are 257-384.
In 124i, extension ports are 1-72. Virtual extension ports are 73-96.
4. HOLD
5. Enter the extension number (e.g., 301 for port 1) for the port...

0503 - DCI Extension Number
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 72 DCI software ports. 384i Available — 288 DCI software
ports. System software 3.05 adds
default assignments for first three 3-
DCI ports.
INUse Program 0503 - DCI Extension Number to assign extension numbers to DCI (Data Communications In-
terface) software ports. System users place data calls to DCIs by dialing the DCI extension numbers (not the
software port numbers). Normally, you should use...

0504 - ACI Extension Number
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 2 ACI Modules
providing 6 software ports which
auto-ID in order of installation. 384i Available — 64 ACI Modules
providing 192 software ports.
INUse Program 0504 - ACI Extension Number to assign extension numbers to ACI (Analog Communications In-
terface) software ports. System users can page through ACIs by dialing the ACI extension numbers (not the soft-
ware port numbers). Normally, you should use...

0505 -  0505 -  (Cont’d)
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Not available.
This program is currently not used.
0500 - System Numbering
0505 - 
790   PROGRAMMING 92000SWG08   Issue 1-0 

0506 - Department Calling Group Numbers
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — eight groups.   384i Available — each Tenant Group has
32 groups.
INUse Program 0506 — Department Calling Group Numbers to assign pilot numbers and names to each Depart-
ment Group set up in Program 1003. The pilot number (200-799) is the number users dial for Department Call-
ing. Normally, you should use unassigned extension numbers (e.g., 600). If you want to use a number in the
normal...

Keys for Entering Names
CLEAR
Clear the text entry if you want to start over.
Dialpad digits 0-9, #
and *.Enter numbers, # and * as part of the name. You don’t need
to press CHECK after entering these characters.
Conditions
None
Feature Cross Reference
Department Calling
Department Step Calling
Telephone Programming Instructions
To enter data for Program 0506 (Department Group Numbers):
1. Enter the programming mode.
2. 0506 + HOLD
Tenant No?
3. Enter the number of the Tenant Group you want to program...

0507 - DCI Pooling Pilot Numbers
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — eight groups. 384i Available — each Tenant Group has
32 groups.
INUse Program 0507 — DCI Pooling Pilot Numbers to assign the pilot number to the DCI Pooling Groups set
in Program 1204. To call a DCI software port within the group, users dial the pilot number. The range is 200-
799. Normally, you should use unassigned extension numbers (e.g., 600) for the pilot numbers. If you want to
use a number...

0508 - ACI Group Pilot Number
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — eight groups. 384i Available — each Tenant Group has
32 groups.
INUse Program 0508 — ACI Group Pilot Number to assign the pilot number to the ACI Groups set in Program
1303. The range is 200-799. To call an ACI software port within the group, users dial the pilot number. Nor-
mally, you should use unassigned extension numbers (e.g., 600) for the pilot numbers. If you want to use an ex-
tension number...