Nitsuko 124i/384i Software Manual

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Callback / Camp On /
Trunk QueuingCode: 1020
Operation: Call busy
extension or access
busy trunk + Press keyLeaving a Callback request at
a busy extension, Camping On
to a busy extension, or
Queuing for a busy trunkOn red when
activated2
Caller IDCode: 1073
Operation: Press key...

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Group Call PickupCode: 1007 
Operation: CALL +
Press keyAnswering a call ringing
another phone in your Pickup
GroupNone *#
Code: 1008 
Operation: CALL +
Press keyAnswering a call ringing a
phone in another Pickup
Group - if you don’t know the
group numberNone 869 
Code: 1009 +...

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Microphone CutoffCode: 1026 
Operation: Set up call
+ Press keyUsing Microphone Cutoff On red when
activated -
Multiple Directory
NumbersCode: 1036 + ext.
Operation: Press keyPlacing or answering a call to
your virtual (phantom)
extensionSlow Flash red
when ringing, On
red when...

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Repeat RedialCode: 1075
Operation: Press keyActivating Repeat Redial
while on a callFast Flash while
system waits to
redial-
Reverse Voice OverCode: 1056 + dest. ext.
Operation: Press and
hold keyInitiating Reverse Voice Over Full BLF red -
Room MonitorCode: 1025
Operation:...

Table 1-4, Function Key Codes by Feature
To program a key, press CALL, dial 851, press the key and enter the code (e.g., 1057 for Voice Over).
For this feature... Use this key... When you are...  Key Lamp StatusAlso see
Srvc Code
Voice Announce Unit
(Park and Page)
(Personal Greeting)Code: 1081
Operation: Press keySetting up Call Forwarding
Off-Premise, Selectable
Display Messaging, VAU Park
and Page and VAU Personal
GreetingNone *4
Voice MailCode: 1059 
In 384i 3.07.10 or
higher, enter 1059
followed by...

7. Enter the additional data required + HOLD.
OR
Press HOLD if code doesn’t require any additional data
For example, Memo Dial (code 1015) requires no additional data. With Internal Paging (code
1006), for example, you must enter the Internal Paging zone as the additional data. Refer to the
chart above for the additional data required.
Key No?
8. Repeat from step 4 to program another key.
OR
HOLD to repeat from step 3 and select another extension port.
OR
HOLD + HOLD to exit.
1000 - Extension Options...

1007 - Programming One-Touch Keys
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — 72 extensions.   384i Available — 256 extensions.
SBUse Program 1007 - Programming One-Touch Keys to select the functions of an extension’s One-Touch
Keys. You can also program One-Touch Keys by using Service Code 855. An extension can have One-Touch
Keys for:
•Direct Station Selection
•Trunk Access (9, 804 + group, or #9 + trunk)
•Abbreviated Dialing (#2 + bin for common, #4 + bin for group)...

Keys for Entering Names
Use this key . . . When you want to . . .
CLEAR
 Clear the text entry if you want to start over.
Dialpad digits 0-9, #
and *.Enter numbers, # and * as part of  the name. You don’t need
to press CHECK after entering these characters.
Conditions
None
Feature Cross Reference
One-Touch Calling
Telephone Programming Instructions
To enter data for Program 1007 (Programming One-Touch Keys):
1. Enter the programming mode.
2. 1007 + HOLD
STA PORT No?
3. Enter the number of the extension...

1008 - Basic Extension Port Setup (Part B)
 Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Available — 96 extensions/virtual
extensions. 384i Available — 384i extensions/virtual
extensions.
INUse Program 1008 - Basic Extension Port Setup (Part B) to set additional options for extension ports. (Also
see Program 1001 on page 875 for additional Basic Extension Port Setup options.) Refer to the following chart
for a description of each option, its range and default setting
Basic Extension Port...

Keyset Ring Options
When you use these
settings . . .Calls ring like this . . .
Program 1008 Item 4 Transferred Trunk
CallDirect Inward Line Intercom Call
0 Long ring followed by a
short pause2 short rings followed
by a pause1 second on followed by
1 second off
1 Long ring followed by a
short pauseContinuous ring Continuous ring
2 Long ring followed by a
short pauseShort ring followed by a
long pauseShort ring followed by a
long pause
Conditions
None
Feature Cross Reference
Refer to the chart above....